USE AND CARE GUIDE
4 SQUARE FLOOR LAMP
THANK YOU
We appreciate the trust and confidence you have placed in us through the purchase of this lamp.We strive
to continually create quality products designed to enhance your home.
Thank you for choosing us!
Table of Contents
Safety Information ....................................................................................................................................... 2
Warranty ...................................................................................................................................................... 2
Pre-Installation ............................................................................................................................................ 3
Planning Installation ............................................................................................................................. 3
Package Contents .................................................................................................................................. 3
Assembly ..............................................................................................................................................4, 5, 6
Care and Cleaning ....................................................................................................................................... 7
Troubleshooting ........................................................................................................................................... 7
Safety Information
□ Consult a qualified electrician with any
electrical questions you may have.
IMPORTANT: Inspect the wire insulation for
any cuts, abrasions, or exposed copper that may
have occurred during shipping. If there is a
defect in the wire, do not continue the assembly
process. Please call our Customer Service
Team.
Warranty
1-YEAR LIMITED WARRANTY
WHAT IS COVERED
The manufacturer warrants this lamp to be free from defects in the materials and workmanship for a period of
one (1) year from date of purchase. This warranty applies only to the original consumer purchaser and only to
products used in normal use. If this product is found to be defective, the manufacturer's only obligation, and
your exclusive remedy, is the repair or replacement of the product at the manufacturer's discretion, provided
that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or
mishandling. This warranty shall not apply to any product that is found to have been improperly installed,
assembled, or used in any way not in accordance with the instructions supplied with the product. This
warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence,
alteration, faulty installation, or any other failure not relating to faulty material or workmanship.
WHAT IS NOT COVERED
This warranty shall not apply to the finish on any portion of the product due to weathering, as this is
considered normal wear. The manufacturer does not warrant and specifically disclaims any warranty, whether
expressed or implied, other than the warranty contained herein. The manufacturer specifically disclaims any
liability and shall not be liable for any consequential or incidental loss or damage, including but not limited
to, any labor or expense costs involved in the replacement or repair of the product.
2
Pre-Installation
PLANNING INSTALLATION
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet
or cardboard. Inspect each part for defects that may have occurred during shipping.
Keep your receipt and these instructions for proof of purchase.
NOTE: This lamp requires the use of one 120V, 60Hz,
150-Watt max, medium-base type A bulb (not included).
Do not exceed the recommended wattage.
PACKAGE CONTENTS
C
B
A
Part
A
D
H
I
Description Quantity
Socket ring
1
Part
F
Description Quantity
Base
1
B
C
D
E
Shade
Socket assembly
Inner pole
Pole 1
1
1
1
G
H
Metal washer
Nut
I
Wrench
2
1
1
3
Assembly instructions
1. Unpack the lamp & pole assemble
□ Carefully organize and place all parts on a smooth, flat surface, line up all of
the parts according to the assembly diagram.
□ Screw the inner pole (D) to bottom of the socket assembly (C).
□ Pull the excess power cord through the pole (E).
□ Slide the pole (E) over the inner pole (D), make sure the pin on bottom of the
socket assembly (C) is inserted into the pole (E).
NOTE: make sure the cord exits from back of the lamp as shown.
Pin
C
D
E
4
Assembly instructions (continued)
2. Assemble the base and shade
□ Insert end of the inner pole (D) into the hole in the base (F), put the nut (H) into
the wrench (I) (included), and then secure the pole (E) to the base (F) with the
two metal washers (G) and nut (H) from bottom of the base (F).
□ Remove the socket ring (A) from the socket by unscrewing the socket ring (A).
□ Place the shade (B) over the socket and secure with the socket ring (A).
Socket
B
E
A
D
Hole
F
G
H
I
5
Assembly instructions (continued)
3. Install the bulb
□ Prior to installing the bulb, inspect the socket for silica packet. If packet is
present, then remove and throw away. Do not expose it to children or pets.
□ Install one 120V, 60Hz, 150-Watt max, medium-base type A bulb (not included)
into the socket of the light lamp.
□ Plug cord into an outlet and turn on at the switch.
Socket
Bulb
(not included)
Switch
Important safety instructions
□ This portable lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician. never use with an extension cord
unless plug can be fully inserted. Do not alter the plug.
Care and Cleaning
□ Clean the lamp with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Problem
The bulb will not light.
The fuse blows or a
circuit breaker trips when
the light is turned on.
Possible Cause
□ The bulb is burned out.
□ The power is off.
□ Did not insert plug into power
outlet.
□ The circuit breaker is off.
□ There is an exposed wire.
□ There are too many items on
one circuit.
Solution
□ Replace the light bulb.
□ Ensure that the power supply
is turned on.
□ Ensure that the plug is fully and
properly inserted into the power
outlet.
□ Ensure that the circuit breaker
is set in the on position.
□ Discontinue use of the lamp.
□ Contact a qualified electrician or
call the Customer Service Team.
□ Unplug other items on the circuit.
7
Loading...