Page 1
***Important Note: Umbrella Must Be Secured With An Umbrella Base/ Pavers Or Bolted to Deck/ Patio***
Step 1:
-Align Base Cross Members Together
-With 4 Bolts Screw in Bottom Tube onto Cross Members
Step 2:
-Insert Frame into Bottom Tube
-Tighten Bottom Tube Screws Until Frame is Securely In Place
Step 3:
-Crank Handle to Remove Any Slack In String
-Insert Umbrella Finial Into Frame Housing
Step 4:
-Unlock Frame Handle By Pulling Up On Lever
-Push Umbrella Frame Arm Until the Umbrella is Fully Extended (as shown)
-Lock Arm In Place by Pushing Down On Lever and Moving The Black Sleeve Into Place
-Crank Handle to Open Umbrella
If a Tilted Umbrella Position is Desired Then…
Step 5:
-Unlock The Frame By Pulling Up On Lever
Step 6:
-Slide Down Handle On Frame
-Lock The Frame By Pushing Down On Lever
Loading...