Page 1
Components List
Assembly Instructions
Page 1/3
Part Name
Description Specification Figure
Part Details
G-1 Glass(NO.1) Size:400*220mm; Thickness:8mm
G-2 Glass(NO.2) Size:400*220mm; Thickness:8mm
G-3
Glass(NO.3) Size:1080*620mm;
Thickness:8mm
G-4 Glass(NO.4) Size:1080*200mm;
Thickness:8mm
G-5 Glass(NO.5) Size:620*310mm; Thickness:8mm
TB-1 Tube(NO.1) Length:; Diameter:
TB-2 Tube(NO.2) Length:528mm; Diameter:50mm
Qty
1
1
1
1
1
2
1
TB-3 Tube(NO.3) Length:430mm; Diameter:50mm
TB-4 Tube(NO.4) Length:178mm; Diameter:50mm
TB-5 Tub(NO.5) Length:86mm; Diameter:50mm
1
2
2
TB-6 Tube(NO.6) Length:718mm; Diameter:50mm 1
TB-7 Tube(NO.7) Length:620mm; Diameter:50mm
CC Chrome Cap Diameter:50mm; Thickness:8mm
1
4
I B-1 I bolt (NO.1) Length:25mm; Diameter:10mm 2
I B-2 I bolt (NO.2) Length:50mm; Diameter:10mm 5
I B-3 I bolt (NO.3) Length:35mm; Diameter:10 mm 4
T E S Tube send seal Diameter:50mm; Thickness:2mm
TOOL 5# Tool
(screw I Bolts)
14
1
Page 2
Assembly Instructions
Page 2/3
Page 3
Assembly Instructions
Page 3/3
Stage 1
Please note stand is best assembled from the bottom up.
1.1 Screw in I bolts (I B-2) to the top of each tube (TB-4).
1.2 Place NO.5 Glass (G-5) in position over each foot tube leg with I bolts passing through holes in each
corner of the shelf. Then screw tubes (TB-2 and TB-3) onto each exposed bolt until tight.
1.3 Screw in I bolts (I B-2) to the top of each tube (TB-3 and TB-7) and screw in I bolt (IB-3) to the top of tube
(TB-6).
S
tage 2
2.
1 Place NO.4 Glass (G-4) in position over each tube leg with I bolts passing through holes in each corner of
the shelf. Then screw tubes (TB-5) onto I bolts until tight.
2.2 Screw in I bolts (IB-3) to top of each tube (TB-5) and screw in I bolt (IB-2) to top of tube (TB-2).
2.3 Place NO.3 Glass (G-3) in position over each tube leg with I bolts passing through holes in each corner of
the shelf.
2.4 Secure NO. 3 Glass with chrome caps on the three tubes (TB-5 and TB-6).
tage 3
S
3.1 Screw in I bolts (IB-1) to the top of each tube (TB-1). Then screw the tubes to chrome caps on the NO.1
Glass (G-1).
3.2 Place NO.2 Glass resting on the NO.3 Glass. Then screw one of the tubes (TB-1) onto exposed bolt.
3.3 Screw in I bolt (IB-3) to the chrome cap. Then screw the chrome cap to another tube (TB-1).
Loading...