Page 1
Infinity Chandelier Installation Instructions
Dimensions: 18"W x 25"H x 18"D
Components:
Fixture Allen Wrench & Lock 15 Glass Ropes w/ 2 replacement
Installation:
Step 1:
Adjust steel cables to a 12 inch height by pulling the cables up above the canopy.
(Make sure locks are secure to cable)
You can also adjust the clear electrical cord by using a 1/8 inch flat head screwdriver to loosen the lock.
Don't worry if the height is not to your likings, you can adjust the cables after installing the glass.
Step 2:
Cable 1: Loosin lock with allen wrench by turning it counter clockwise.
Page 2
Step 3: Loop cable around a glass rope and tighten lock with allen wrench.
Step 4: Repeat step 3 untill all 15 pieces of glass ropes are installed.
It should look like this when your done.
Step 5: After installing all glass ropes it's time to adjust each cable to your perferred height.
You can adjust the height by pushing the locks on the canopy down.
To shorten, push the lock down and feed the steel cable up into the canopy.
To add height, push lock down and pull the steel cable down.
Each chandelier is handblown, so results may
vary...The wonderful thing about a Viz Glass
chandelier is you can become an artist and create
your own designs!
Page 3
Step 6: Install light bulbs (Use gloves when handling the light bulbs.)
120V 60W Candelabra light bulb
Loading...