Page 1
ASSEMBLY INSTRUCTION
A
Wood Shelf
B
Side Panel
C
Bolt
1/4” x 5/8”
5pcs
4pcs
40pcs
D
Wall Anchor
E
L Bracket
F
Screw
(Anti-Tipping)
(Anti-Tipping)
(Anti-Tipping)
2pc
2pcs
2pcs
G
Plastic Strap
H
Allen Wrench
(Anti-Tipping)
1/4”
2pcs
1pc
This page lists all the contents included in the box.
Please take the time to identify the hardware as
well as the individual components to this product.
As you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect
them from damage.
68” BOOKCASE WITH FAUX MARBLE SHELVES
1
Page 2
*** Do not tighten screws & bolts until the entire unit is completely assembled.
1
Attach Side Panel (B) to Wood Shelf (A) by Bolt (C) and Allen Wrench (H) as shown.
Attach the third Side Panel (B) to Wood Shelf (A) by Bolt (C) and Allen Wrench (H) as
shown.
2
A
2
Page 3
Attach the fourth Side Panel (B) to Wood Shelf (A) by Bolt (C) and Allen Wrench (H) as shown.
3
Select a location where you want the shelf mounted. Mark on the wall the two locations where
the Wall Anchors (D) will be placed. Drill a hole for each anchor slightly smaller than the size
of Screws (F). Push the Wall Anchors (D) as far as it will go with your finger. Tap gently with a
hammer until the anchors are in. Then align the L Brackets (E) to the Wall Anchors (D) and
insert Screws (F) to secure.
4
A
Wall
D
3
Page 4
Cleaning & Care
5
Insert each end of the Plastic Strap (G) into L Brackets (E), then secure and tighten.
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry
or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all
connections are tight.
4
Loading...