
ASSEMBLY INSTRUCTION FOR ACME FURNITURE
MODEL # 45005 3PCS PATIO BISTRO SET
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts
which may have come loose inside the carton during shipment. Separate, identify and count all parts and
metal hardware. Compare with parts list to be sure all parts are present. If any part(s) are missing or damaged,
please contact your local furniture dealer. For efficient and speedy service, please indicate the model number
and code letter of part(s) needed.
***Do not fully tighten screws until fully assembled***
Seat for chair
Legs for table
Left back leg for chair
Right back leg for chair
Left front leg for chair
Right front leg for chair
Table
Glass for table
Seat cushion
Bolt - 36pcs
Washer - 36pcs
Key allen - 1pc

Safety and Care Advice
To clean your furniture we advise using warm soapy water. Use a mild cleaner to avoid damaging
the finish. Apply the cleaner using a soft hand brush which will help loosen any stubborn dirt
Once cleaned, the soapy water can be rinsed off with clean water, and the suite will need to be
allowed to dry thoroughly prior to storing. Do not store the suite away whilst wet
To clean the glass, use an appropriate cleaner, and apply with a soft cloth
We recommend the furniture is stored away when not in use to prolong the life of your product
It is recommended to use a heat mat when placing hot or cold dishes on the glass surface
Care should be taken when sitting down on the furniture with any sharp objects (garden tools
and knives) in your pockets, as these could tear any fabric or pierce through the resin weave,
causing irreparable damage.