Page 1
Chair Assembly
Assemble
1. The rear chair leg on this chair is the one at the end of the two long sides.
On this chair, it is the tallest leg
2. Place legs with the at feet on the ground
3. Align the seat so that the posts hover over the legs and insert the rear leg into the
rear tube on the seat
4. Insert one of the front legs
5. Inserting the third leg will involve a small stretch
6. When all legs have been inserted, push down on the chair to help it settle in
7. Where each of the legs have been inserted you’ll see a space to tighten the two
pieces with set-screws (provided) NOTE: be sure you can see the legs through the set
screw holes before inserting screws
8. Tighten the screws
You’re done! Now sit and enjoy!
Disassemble
1. To remove the legs, pop out one leg at a time
2. Chairs – remove front legs rst
3. Baby chairs and Rockers – remove rear leg rst
4. Put your foot on the inside of the triangle closest to the leg you’re pulling out to hold
the chair down.
If you have any questions about the assembly of your chair or anything
else whatsoever, please contact us.
Email us a photo of your chair(s) in their new home and enter to win a FREE chair!
TM
Loading...