Label Picture Description QTY
A Front Panel 1
B Back Panel 1
C Side Panel 2
D Base Panel 1
E
Lid - Top Panel
(with airhinge)
1
F Inner Lining 1
Caution : You must read this before you proceed
Storage Trunk
Picture
Page 1 OF 6
Label Picture Description QTY
① Allen Key 1
② Wrench 1
③
Washer
(M6)
20
④
Bolt
(M6*35mm)
17
⑤
Bolt
(M6*20mm)
2
⑥
Bolt
(M6*20mm)
7
⑦ PVC Gasket 2
⑧ Nut (M6) 2
Before
Beginning
Assembly:
Page 2 OF 6
This Storage Trunk has multiple parts and may require up to 30 minutes to assemble. To give
you an overview of the Storage Trunk parts, the above picture is to help you put the various
parts into perspective. Please read through the instructions below to familiarise yourself with the
parts and steps before assembly.
Open the carton and place all parts onto a clean, non-marring surface.
Attach Side Panels(C) to Front Panel(A) using Bolts(④) and Washers(③) with Allen Key(①) as
shown in the picture above.
Do not fully tighten the Bolts.
Step 1
Overview
FRONT FACING
Page 3 OF 6
Attach Base Panel(D) to the four Side Panels using Bolts(④) and Washers(③) with Allen
Key(①) as shown in the picture above.
Do not fully tighten the Bolts.
Step 4
Attach Lid-Top Panel(E) to the Back Panel(B) using Bolt(⑥) with Allen Key(①) as shown in the
picture above.
Do not fully tighten the Bolts.
Attach Back Panel(B) to Side Panels(C) using Bolts(④) and Washers(③) with Allen Key(①) as
shown in the picture above.
Do not fully tighten the Bolts.
Step 2
Step 3
Page 4 OF 6
Step 5
Attach Pressure Hinge on Lid-Top Panel(E) to the mounting position inside the Back Panel(B)
using Bolt(⑤), PVC Gasket(⑦), Washer(③) and Nut(⑥) with Wrench(②) and Allen Key(①) as
shown in the picture.
Tighten all Bolts at all joints fully in a sequential manner.
Spread out the Inner Lining(F).
Place it into the Trunk.
Then smooth out the corresponding Velcro tapes until all tapes meet and seal securely.
There is a hole in the Lining that should be aligned to the Pressure Hinge.
Your Storage Trunk is ready for use.
This Storange Trunk should only be used on a flat, level surface.
Step 7
Step 6
Page 5 OF 6
What is Proposition 65?
Proposition 65 is a California law that requires warning labels on products that may contain one of more than
800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment
(OEHHA) has deemed to cause cancer or other reproductive toxicity. Chemicals and elements on this list
include wood dust, brass, and other everyday substances, which can be found in very common household
items, such as: lamps, tableware, jewelry, crystal glasses, electric cords, beauty products, automobiles, and
furniture.
Why Did I Find a Proposition 65 Warning on My Home Goods Product?
We include Proposition 65 warnings on all of our products because there is always a chance that one of the
800-plus common chemicals and ingredients listed under this law could potentially be on our furniture or
packing materials. We risk large fines under this law, if we don't include this warning.
Should I worry?
We realize you may be worried finding this warning on our products, but we want to reassure you that the
hazardous exposure limits for any of these chemicals have never been found on furniture products that we’
ve shipped to our customers. Additionally, this warning label is very common and can be found on almost
every piece of furniture sold in the state of California.
Just How Common Are Proposition 65 Warnings?
Proposition 65 warnings have become so common in California that it is hard to take a trip to a local bank,
grocery store, or restaurant without finding at least one warning. In fact, even the Disney Land Resort has a
Proposition 65 warning:
Do not clean furniture with harsh cleansers or polish.
Do not put hot items directly on furniture surface
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended and
lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover the
product and /or place under patio or awnings.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct
sunlight is recommended.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Children should not climb or jump on the furniture.
Keep away from sources of ignition.
Loading...