Lamp B od y (A )
Bu lb
(B)
Shade
(D)
Fini al ( G)
Pl as tic Wa sh er(F)
Di ff user( H)
Posi ti on Cli p( E)
Harp ( C)
In the same
direction
ASSEMBLY INSTRUCTIONS:
1. CAREFULLY UNPACK AND PLACE ALL PARTS ON A FLAT
SURFACE AND LINE THEM UP AS PER THE SKETCH.
2. INSERT HARP (C) INTO SADDLE OF LAMP BODY (A).
3. INSTALL SHADE (D) ONTO HARP (C).
4. PLACE POSITION CLIP (E) OVER THE STEEL WIRE, ONTO THE
NIPPLE OF HARP (C), AS SHOWN IN PHOTO (1).
5. PLACE PLASTIC WASHER (F) ONTO THE NIPPLE OF HARP (C),
AND SECURE WITH FINIAL (G).
6. SCREW BULBS (B) INTO SOCKET.
7. PLACE HOLE OF DIFFUSER (H) ONTO FINIAL (G).
8. INSERT THE POLARIZED PLUG INTO WALL OUTLET, TURN ON
THE SWITCH AND ENJOY YOUR NEW LAMP.
PHOTO (1)
※ PLEASE INFORM YOUR DEALER IMMEDIATELY IN CASE OF ANY PARTS SHORTAGE.
※ SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
USE A 13W 2PCS CFL TYPE BULB OR 60W 2PCS (MAXIMUM) INCANDESCENT A TYPE BULB.
Loading...