
Caution: You must read this before you proceed
Table
Label Picture Description QTY
A Left Leg 1
B Right Leg 1
C
Table Top Frame (with
Suction Cups)
D Glass Top 1
Label Picture Description QTY
1
①
②
③
Bolt(M6*20MM) 5
Bolt(M6*25MM)
Allen Key 1
5

Before Beginning Assembly:
Glass Top(D)
Left Leg(A)
Right Leg(B)
Table Top Frame (C)
FRONT FACING
This Table has multiple parts and may require up to some 30 minutes to assemble. To
give you an overview of the Table parts, the above picture is to help you put the various
parts into perspective. Please read through the instructions below to familiarise yourself
with the parts and steps before assembly.

Step 1
Take out the silders in the four ends of Table Top Frame(C ) using Allen Key(③).
Step 2
Open the carton and place all the parts on a clean, non-marring surface.
2.1 Attach the Table Top Frame(C) to the Left Leg(A) using Bolt(②) and Allen Key(③) as
shown in the picture.
2.2 Attach the Table Top Frame(C) to the Left Leg(A) using Bolt(①) and Allen Key(③) as
shown in the picture.
Do not fully tighten the Bolt.
Caution: The Table and its Parts are Heavy. Two adults are required for lifting and
moving them.
Step 3
3.1 Attach the Table Top Frame(C) to the Right Leg(B) using Bolt(②) and Allen Key(③) as
shown in the picture.
3.2 Attach the Table Top Frame(C) to the Right Leg(B) using Bolt(①) and Allen Key(③) as
shown in the picture.
Do not fully tighten the Bolt.
Caution: The Table and its Parts are Heavy. Two adults are required for lifting and
moving them.

Step 4
Stand up the table, check stability and then tighten the bolts.
Note DO NOT fully tighten a BOLT in one go and then move on to the next. Rather,
In a sequential manner, gradually tighten each Bolt until all bolts are evenly
secured. This methodology will ensure maximum evenness once all Bolts are fully
tightened.
Step 5
Place the Glass Top(D) on the assembled Table Frame.
Caution: The Table and its Parts are Heavy. Two adults are required for lifting and
moving them.
Step 6
Your Table is ready for use.

Questions & Answers about Proposition 65
• What is Proposition 65?
Proposition 65 requires businesses to provide warnings to Californians about significant
exposures to chemicals that cause cancer, birth defects or other reproductive harm.
These chemicals can be in the products that Californians purchase, in their homes or
workplaces, or that are released into the environment. By requiring that this information be
provided, Proposition 65 enables Californians to make informed decisions about their
exposures to these chemicals.
Proposition 65 also prohibits California businesses from knowingly discharging significant
amounts of listed chemicals into sources of drinking water.
Proposition 65 requires California to publish a list of chemicals known to cause cancer,
birth defects or other reproductive harm. This list, which must be updated at least once a
year, has grown to include approximately 900 chemicals since it was first published in
1987.
• What types of chemicals are on the Proposition 65 list?
The list contains a wide range of naturally occurring and synthetic chemicals that include
additives or ingredients in pesticides, common household products, food, drugs, dyes, or
solvents. Listed chemicals may also be used in manufacturing and construction, or they
may be byproducts of chemical processes, such as motor vehicle exhaust.
• What does a warning mean?
If a warning is placed on a product label or posted or distributed at a workplace, a
business, or in rental housing, the business issuing the warning is aware or believes that it
is exposing individuals to one or more listed chemicals.
By law, a warning must be given for listed chemicals unless the exposure is low enough to
pose no significant risk of cancer or is significantly below levels observed to cause birth
defects or other reproductive harm.
• Where can I get more information on Proposition 65?
If you have specific questions on the administration or implementation of Proposition 65,
you can contact OEHHA's Proposition 65 program at P65.Questions@oehha.ca.gov, or by
phone at (916) 445-6900.