Page 1
Assembly Instructions
Caution : You must read this before you proceed
Table
Part List
Label Description QTY
1 Table Top 1
2 Cross Leg 1
3 Legs 2
5 Locking Plate 1
Picture
Hardware
Label Description QTY
A Screw (M6 *20MM) 21
B Spring washer (M6) 21
C Flat Washer(M6 *16MM) 21
D M6 Allen key 1
Picture
Page 1 OF 4
Page 2
Assembly Preparation
Before
Beginning
Assembly:
*Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list. If any parts is missing or
damaged,do not attempt to assemble the product.
Assembly Steps
OVERVIEW
TableTop (1)
CrossLeg
Legs
This Table has multiple parts and may require up to 30 minutes to assemble.
To give you an overview of the Table parts, the above picture is to help you put the
various Table parts into perspective.
Please read through the instructions below to familiarise yourself with the parts and steps
before assembly.
Page 2 OF 4
Page 3
Step 1
Hardware Used
A：M6 screw
B：Spring washer
D：Flat Washer(M6*12MM)
Position the bottom of the Table top(1) as shown.
And then insert the Legs(2&3) into the mounting position of Table Top(1).
Attach the Legs(2&3) by using M6 Screw(A) + Spring Washer(B)+ Flat Washer (C), onto
metal plate of Legs(2), tightening with Allen Key(E).
Step 2
Hardware Used
A：M6 Screw
B：Spring Washer
C：Flat Washer(M6 *16MM)
Place Locking Plate(4) to the cross position of Legs by using M6 Screw(A) + Spring
Washer(B)+ Flat Washer (C ), tightening with Allen Key(E).
Step 3
Make sure all parts are connected and securely locked into position.
Your Table is ready for use.
This Table can only be used on a flat, level surface.
Page 3 OF 4
Page 4
Page 4 OF 4
Loading...