Wingback headboard assembly
components
item description qty
A Headboard 1
B Headboard Leg 2
C Wing 2
Please note: actual headboard may
look dierent than illustration.
hardware
(H1) x 6
2” x 5/16” bolt
(H2) x 24
1 1/4” washer
(H3) x 4
5/8” x 5/16” bolt
(H4) x 4
1 x 1/4” bolt
A
C
B
(H5) x 4
1/4” nuts
Please note: you will need a at head screwdriver and a wrench to assemble your headboard.
limited warranty
We guarantee our upholstered furniture against defects in construction for a period of one (1) year. When a structural defect is brought to
our attention, we will repair or replace it at our option at no charge to the customer (includes parts and labor, not transportation costs).
Fabric wear-ability for upholstered furniture is not covered by the warranty. Vacuum for regular cleaning.
PLEASE DISPOSE OF PLASTIC BAG(S) AND CARTON(S) RESPONSIBLY.
1
Wingback headboard assembly
step 1 - attaching the wings
1.1
Attach (C) wing to (A) headboard
using (H1) bolts and (H2) washer.
Tighten using flat head screwdriver.
Please note: Make sure the top of the
(A) headboard is level with the top of
the (C) wings before tightening.
step 2 - attaching the headboard legs
OUT
2.1
Insert (B) headboard leg through hole
of (A) headboard and align the slots
with the holes.
Please note: Make sure the “Out”
sticker on each (B) headboard leg is
facing the correct way.
2.2
Attach (B) headboard legs to (A)
headboard using (H3) bolts and (H2)
washers. Tighten with a flat head
screwdriver.
Please note: Make sure the
(B) headboard legs are flush with
the ground before tightening.
2
Wingback headboard assembly
step 3 - attaching assembled headboard to bed frame
3.1
Attach assembled headboard to your
bed frame using (H4) bolts, (H2)
washers and (H5) nuts. Tighten with a
flat head screwdriver and wrench.
B
C
3.2 (OPTIONAL)
If you are assembling a complete
upholstered bed, attach
(C) headboard wings to upholstered
bed frame using (H1) bolts and (H2)
washers. If you are assembling a
headboard only, ignore this step.
3
Loading...