Brayden Studio BRYS6081 Installation & Assembly

Product Dimensions:63"WX31-1/2"DX29-1/2"H
PIECE QUANTITY
A 1X
B 2X
C 1X
H1 10X
H2 2X
H3 1X
H4 4X
Rubber pad
Bar
Allen bolt S
M6x30mm
Allen bolt L
M6x90mm
DESCRIPTION
PICTURE
Top
Legs
CARE AND MAINTENANCE
Always use felt pads under allarticles to prevent discoloration or softening of the lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and avoid common hazards such as hot dishes,harsh solvents and abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with water or furniture polish. On highly used surfaces we recommend applying a quality paste wax which should be used on a regular basis to provide additional protection from sratches and spills. How often you apply the wax depends on how much wear the furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * This item may require periodic tightening
Part List and Hardware List
Step 1 Step 2 Attach the legs(B) to the top (A),using Allen bolt(H1) Attach the bar (C) to legs(B),using Allen bolt(H1) Tighten with allen key(H3) Tighten with allen key(H3)
Step 3 Step 4 Using Allen bolt(H2),tighhten with allen key(H3) Attach the rubber pads(H4) to the bottom of legs(B)
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 5 minutes. Tools Required for Assembly (included): Allen Key
2
1
3
4
Loading...