CAUTION: Read instruction carefully and turn electricity off at main circuit breaker panel
before beginning installation.
Care and Cleaning
To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean
water, never a solvent)to wipe the surface of the fixture.
To clear the inside of the fixture, first disconnect power to the fixture by turning off the circuit
breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean
cloth(use clean water, never a solvent) to wipe the interior surface of the fixture
Do not use any cleaners with chemical, solvents or harsh abrasives. Use Only a dry soft cloth
to dust or wipe carefully.
Estimated Assembly Time:30 minutes
Part List and Hardware List
Assembly Instruction
1X
1X
1X
2X
1X
1X
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
B
A
C
D
E
E1
I
Mounting Plate
Canopy
Chain
Hanging Loop
Canopy Nut
Wire Nut
Closable link/ cap
H
G
1X
F
Fixture Loop
1X
3X
2X
J
Lampbody
Mounting Screw
Bulb
20X
1/3
Installation
Step 1
Step 2
Step 3 Wire connection
*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and
ridged and the hot wire will be round in shape and smooth.(See illustration on left)
Clear,Brown,Gold or Black without Tracer(colored stripes)
Clear,Brwn,Gold or Black without Tracer(colored stripes)
Insulated Wire(not green)with copper metal conductor
Insulated Wire(not green)with Silver metal conductor
Black
White
*Parallel Cord(round&smooth)
*Parallel Cord(square&ridged)
Connect,Hot,Black or Red outlet Supply Wire to:
Connect,Neutral,White Outlet Supply Wire to:
Sepetate the Mounting Plate(A) from the
Canopy (B) by unscrewing the Canopy
Nut(D)anti-clockwise.
Unpack all parts from cartons carefully.
Screw the Chain(E) to the Hanging Loop(C) of the
Metal Plate(B)and the Fixture Loop(F) of the
Lampbody(G) with Closable Link(E1)as diagram.
B
D
C
A
2/3
Grounding Instructions:
a) For installation in the United States: Wrap ground wire from outlet box around green
ground screw on mounting bracket, no less than 2" from wire end. Tighten ground screw. If
fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire
around green grounding screw on mounting bracket. Tighten ground screw.
Step 4
Fix the Mounting Plate(A) to the junction box
with Mounting Screw (I).
Attach the Canopy(B) to the junction box and fix it
by turning the Canopy Nut (D) clockwise.
PLEASUE USE ON/OFF TYPE"S" BULB MAX 25-WATT
OR CFL BULB MAX 5-WATT
THERE ARE 20PCS 25-WATT BULBS IN THE BOX.
Step 5
Consult a qualified electrician to ensure correct branch
circuit conductor
ENJOY YOUR LAMP
Please use small number of bulbs if the light is enough for your room.
Please do not turn on all 20 bulbs at the same time for long time.
Insert the bulb (J) into the Socket.
H
A
I
C
B
D
J
3/3
Loading...