standard headboard assembly
components
item description qty
A Headboard 1
B Headboard Leg 2
Please note: actual headboard may
look dierent than illustration.
hardware
A
B
(H1) x 4
5/8” x 5/16” bolt
Please note: you will need a at head screwdriver and a wrench to assemble your headboard.
We guarantee our upholstered furniture against defects in construction for a period of one (1) year. When a structural defect is brought to
our attention, we will repair or replace it at our option at no charge to the customer (includes parts and labor, not transportation costs).
Fabric wear-ability for upholstered furniture is not covered by the warranty. Vacuum for regular cleaning.
PLEASE DISPOSE OF PLASTIC BAG(S) AND CARTON(S) RESPONSIBLY.
(H2) x 12
1 1/4” washer
(H3) x 4
1 x 1/4” bolt
limited warranty
(H4) x 4
1/4” nuts
1
standard headboard assembly
step 1 - attaching the headboard legs
OUT
A
B
1.1
Place (A) headboard face down on
a flat surface. Place (B) headboard
legs on the back of (A) headboard,
aligning the slots of the legs with the
holes of the headboard.
Please note: Make sure the “Out”
sticker on each (B) headboard leg is
facing the correct way.
1.2
Attach (B) headboard legs to (A)
headboard using (H1) bolts and (H2)
washers. Tighten with a flat head
screwdriver.
step 2 - attaching the headboard to your bed frame
2.1
Attach the assembled headboard to
your bedframe using (H3) bolts, (H2)
washers and (H4) nuts. Tighten with a
flat head screwdriver and wrench.
Please note: The height of your
headboard can be adjusted by
loosening the (H1) bolts and shifting
the (A) headboard up or down.
2
Loading...