standard counter + bar stool assembly
components
item description qty
D
A
B
A Back 1
B Seat 1
C Legs 1
D Left facing rail 1
E Right facing rail 1
Please note: actual product may
look dierent than illustration.
C
E
hardware
(H1) x 2
2" bolt
(H6) x 4
2 1/2" bolt
Please note: you will need a phillips head screwdriver for this assembly.
(H2) x 10
spring washer
(H7) x 4
screw
(H3) x 10
3/4" flat washer
(H4) x 4
3 1/2" bolt
(H5) x 1
L wrench
1
step 1
standard counter + bar stool assembly
1.1
Fit (B) seat into (A) back, making sure the
wooden dowel fits in the center hole.
Attach the center section using (H1) bolts,
(H2) spring washers and (H3) flat washers.
Tighten using (H5) wrench.
Please note: Before tightening, make sure
the bottoms of (A, B) are flush.
1.2
Finish attaching (B) seat to (A) back using
(H4) bolts, (H2) spring washers and (H3) flat
washers. Tighten using (H5) wrench.
2
step 2
standard counter + bar stool assembly
2.1
Insert (C) legs to (B) seat and attach using
(H6) bolts, (H2) spring washers and (H3) flat
washers.
Please note: leave bolts loose until Step 3.1
E
C
D
E
D
D
E
2.2
Slide (D, E) rails into (C) legs, making sure the
stickers match.
Attach using (H7) screws.
Please note: leave screws loose until Step 3.1
3
step 3
standard counter + bar stool assembly
3.1
Turn assembled chair upright and place
on a flat surface. Push legs up or down as
neccessary to level.
Once level, tighten all bolts and screws.
Please note: each (C) leg has an adjustable
cap to help level your chair.
limited warranty
We guarantee our upholstered furniture against defects in construction for a period of one (1) year. When a structural defect is brought to
our attention, we will repair or replace it at our option at no charge to the customer (includes parts and labor, not transportation costs).
Fabric wear-ability for upholstered furniture is not covered by the warranty. Vacuum for regular cleaning.
PLEASE DISPOSE OF PLASTIC BAG(S) AND CARTON(S) RESPONSIBLY.
4
Loading...