ASSEMBLY INSTRUCTIONS
1. CAREFULLY UNPACK AND PLACE ALL PARTS ON A SMOOTH SURFACE AND LINE
THEM UP AS PER THE SKETCH.
2. PLACE BASE (A) ON A SMOOTH SURFCE, SCREW
SOCKET ASSEBLY (B) INTO BASE(A),
THEN PULL WIRE( F) OUT FROM BASE.
3. INSERT STEM(C) INTO THE SADDLE OF
SOCKET ASSEBLY (B).
4. PLACE THE SHADE (D) ONTO STEM (C).
5. SCREW FINIAL (E) ONTO STEM (C) TO
SECURE THE SHADE(D).
6. INSERT THE POLARIZED PLUG INTO
WALL OUTLET, TURN ON THE SWITCH
AND ENJOY YOUR NEW LAMP.
USE 2x60 WATTAGE (MAXIMUM) TYPE A BULB (BULB NOT INCLUDED)
IMPORTANT SAFETY INSTRUCTIONS:
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE
OTHER) AS A SAFETY FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK. THIS
PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF IT DOES NOT FIT FULLY
IN THE OUTLET, REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A
QUALIFIED ELECTRICIAN. NEVER USE WITH AN EXTENSION CORD UNLESS THE
PLUG CAN BE FULLY AND EASILY INSERTED. DO NOT ATTEMPT TO ALTER THE PLUG.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Loading...