Bravia KDL-52Z5500, KDL-40Z5500, KDL-46Z5500 Operating Instructions Manual

Download

LCD Digital Colour TV

Operating Instructions

操作手冊

KDL-52Z5500

KDL-46Z5500

KDL-40Z5500

Introduction

Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference.

Trademark information

HDMI, the HDMI logo and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

DLNA and DLNA CERTIFIED are trademarks and/or service marks o f Digital Living Network Alliance.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

“BRAVIA” and are trademarks of Sony Corporation.

“XMB” and “xross media bar” are trademarks of Sony Corporation and Sony Computer Entertainment Inc.

The typefaces used on the screen display are solely developed by DynaComware.

This television is designed for use in Hong Kong and ensured the usage in Hong Kong only.

Table of Contents

Start-up Guide 4

Safety Information ............................................................................................................................8

Precautions .......................................................................................................................................9

Remote and TV Controls/Indicators..............................................................................................10

Watching TV

Watching TV ....................................................................................................................................15

Using the Digital Electronic Programme Guide (EPG) (for digital channels only) ..................17

Using the Favourite List ................................................................................................................18

Using Optional Equipment

Connecting Optional Equipment ..................................................................................................19

Viewing Pictures from Connected Equipment .............................................................................22

Playing back Photo/Music/Video via USB ....................................................................................23

Using BRAVIA Sync with Control for HDMI..................................................................................25

Operating Optional Equipment using the TV Remote .................................................................26

Using Home Network Features

Connecting to the Network ............................................................................................................28

Enjoying Photo/Music/Video Files via the Network.....................................................................28

Checking the Network Connection................................................................................................29

Adjusting the Server Display Settings..........................................................................................30

Using Menu Functions

Navigating through TV Home Menu on XMB™ ............................................................................31

TV Settings Menu............................................................................................................................32

Additional Information

Installing the Accessories (Wall-Mount Bracket).........................................................................44

Specifications..................................................................................................................................47

Troubleshooting..............................................................................................................................49

Index.................................................................................................................................................53

Before operating the TV, please read “Safety Information” (page 8). Retain this manual for future reference.

Start-up Guide

Before Use

To check the accessories

Mains lead/AC power cord (1)

Cable holder (1)

Stand (1) and screws (4) (KDL-46Z5500/40Z5500 only)

RM-GD008 Remote (1)

Size AA batteries (R6 type) (2)

To insert batteries into the remote

Push and lift the cover to open.

1:Attaching the stand (for KDL-46Z5500/40Z5500)

1 Open the carton box and take out the stand

and the screws.

2 Place the TV set on the stand.

3 Fix the TV to the stand according to the

arrow marks that guide the screw holes using the supplied screws.

• If using an electric screwdriver, set the tightening torque at approximately 1.5 N·m (15 kgf·cm).

2: Connecting an aerial/ antenna/cable/VCR

Connecting an aerial/antenna/cable

Aerial/Antenna cable (not supplied)

Connecting an aerial/antenna/cable and VCR

3: Preventing the TV from toppling over

Start-up Guide

AV cable (not supplied)

VCR

Aerial/ Antenna cable (not supplied)

S-Video cable (not supplied)

Aerial/ Antenna cable (not supplied)

1 Install a wood screw (4 mm in diameter,

not supplied) in the TV stand.

2 Install a machine screw (M4 × 20, not

supplied) into the screw hole of the TV.

3 Tie the wood screw and the machine

screw with a strong cord (not supplied).

• An optional Sony support belt kit is used to secure the TV. Contact your nearest Sony service centre to purchase a kit. Have your TV model name ready for reference.

4: Bundling the cables

You can also install the cable holder here. (After installation, you will not be able to remove it.)

5: Performing the initial set-up

Follow the instructions on the screen.

• Do not bundle the mains lead/AC power cord together with other cables.

Programme Sorting: If you want to change the order of analogue channels, follow the steps in “Programme Sorting” (page 40).

Eco Preset: When you select “Yes,” the “Eco” settings are changed into recommended values to reduce power consumption.

• You can also tune channels manually (page 42).

Adjusting the viewing angle of the TV

This TV can be adjusted within the angles shown below.

Adjust the angle left and right (swivel)

Top view

Front

Detaching the Table-Top Stand from the TV

• Remove the screws guided by the arrow marks of the TV.

• Do not remove the Table-Top Stand for any reason other than listed below. – To wall-mount the TV. – To put the TV in the carton at time of purchase

(KDL-46Z5500/40Z5500 only).

Start-up Guide

Safety Information

Installation/Set-up

Install and use the TV set in accordance with the instructions below in order to avoid any risk of fire, electrical shock or damage and/or injuries.

Installation

• The TV set should be installed near an easily accessible AC power outlet.

• Place the TV set on a stable, level s urface to avoid it from falling down and cause personal injury or damage to the TV.

• Only qualified service personnel should carry out wall installations.

• For safety reasons, it is strongly recommended that you use Sony accessories, including:

KDL-52Z5500/46Z5500/40Z5500:

– Wall-mount bracket SU-WL500/

WL50B

• Be sure to use the screws supplied with the Wall-mount bracket when attaching the mounting hooks to the TV set. The supplied screws are designed so that they are 8 mm to 12 mm in length when measured from the attaching surface of the mounting hook. The diameter and length of the screws differ depending on the Wall-mount bracket model. Use of screws other than those supplied may result in internal damage to the TV set or cause it to fall, etc.

8 mm - 12 mm

Ventilation

• Never cover the ventilation holes or insert anything in the cabinet.

• Leave space around the TV set as shown below.

• It is strongly recommended that you use a Sony wall-mount bracket in order to provide adequate air-circulation.

Installed on the wall

30 cm

10 cm 10 cm

Leave at least this space around the set.

10 cm

Installed with stand

30 cm

10 cm

6 cm

AC power cord

Handle the AC power cord and outlet as follows in order to avoid any risk of fire, electrical shock or damage and/or injuries:

– Use only Sony supplied AC power

cords, not those of other brands.

– Insert the plug fully into the AC power

outlet.

– Operate the TV set on a 220–240 V AC

supply only.

– When wiring cables, be sure to unplug

the AC power cord for your safety and take care not to catch your feet on the cables.

– Disconnect the AC power cord from

the AC power outlet before working on or moving the TV set.

– Keep the AC power cord away from

heat sources.

– Unplug the AC power plug and clean it

regularly. If the plug is covered with dust and it picks up moisture, its insulation may deteriorate, which could result in a fire.

Notes

• Do not use the supplied AC power cord on any other equipment.

• Do not pinch, bend, or twist the AC power cord excessively. The core conductors may be exposed or broken.

• Do not modify the AC power cord.

• Do not put anything heavy on the AC power cord.

• Do not pull on the AC power cord itself when disconnecting the AC power cord.

• Do not connect too many appliances to the same AC power outlet.

• Do not use a poor fitting AC power outlet.

Screw (supplied with the Wall-mount bracket)

Mounting Hook Hook attachment on rear

of TV set

Transporting

• Before transporting the TV set, disconnect all cables.

• Two or three people are needed to transport a large TV set.

• When transporting the TV set by hand, hold it as shown on the right. Do not put stress on the LCD panel and the frame around the screen.

• When lifting or moving the TV set, hold it firmly from the bottom.

• When transporting the TV set, do not subject it to jolts or excessive vibration.

• When transporting the TV set for repairs or when moving, pack it using the original carton and packing material.

Leave at least this space around the set.

• To ensure proper ventilation and prevent the collection of dirt or dust:

– Do not lay the TV set flat, install

upside down, backwards, or sideways.

– Do not place the TV set on a shelf,

rug, bed or in a closet.

– Do not cover the TV set with a

cloth, such as curtains, or items such as newspapers, etc.

– Do not install the TV set as shown

below.

Air circulation is blocked.

Wall Wall

Prohibited Usage

Do not install/use the TV set in locations, environments or situations such as those listed below, or the TV set may malfunction and cause a fire, electrical shock, damage and/or injuries.

Location:

Outdoors (in direct sunlight), at the seashore, on a ship or other vessel, inside a vehicle, in medical institutions, unstable locations, near water, rain, moisture or smoke.

Environment:

Places that are hot, humid, or excessively dusty; where insects may enter; where it might be exposed to mechanical vibration, near flammable objects (candles, etc). The TV set shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the TV.

Situation:

Do not use when your hands are wet, with the cabinet removed, or with attachments not recommended by the manufacturer. Disconnect the TV set from AC power outlet and antenna during lightning storms.

Broken pieces:

• Do not throw anything at the TV set. The screen glass may break by the impact and cause serious injury.

• If the surface of the TV set cracks, do not touch it until you have unplugged the AC power cord. Otherwise electric shock may result.

When not in use

• If you will not be using the TV set for several days, the TV set should be disconnected from the AC power for environmental and safety reasons.

• As the TV set is not disconnected from the AC power when the TV set is just turned off, pull the plug from the AC power outlet to disconnect the TV set completely.

• However, some TV sets may have features that require the TV set to be left in standby to work correctly.

For children

• Do not allow children to climb on the TV set.

• Keep small accessories out of the reach of children, so that they are not mistakenly swallowed.

If the following problems occur...

Turn off the TV set and unplug the AC

power cord immediately if any of the following problems occur.

Ask your dealer or Sony service centre to have it checked by qualified service personnel.

When:

– AC power cord is damaged. – Poor fitting of AC power outlet. – TV set is damaged by being dropped,

hit or having something thrown at it.

– Any liquid or solid object falls through

openings in the cabinet.

Precautions

Viewing the TV

• View the TV in moderate light, as viewing the TV in poor light or during long period of time, strains your eyes.

• When using headphones, adjust the volume so as to avoid excessive levels, as hearing damage may result.

LCD Screen

• Although the LCD screen is made with high-precision technology and 99.99% or more of the pixels are effective, black dots may appear or bright points of light (red, blue, or green) may appear constantly on the LCD screen. This is a structural property of the LCD screen and is not a malfunction.

• Do not push or scratch the front filter, or place objects on top of this TV set. The image may be uneven or the LCD screen may be damaged.

• If this TV set is used in a cold place, a smear may occur in the picture or the picture may become dark. This does not indicate a failure. These phenomena disappear as the temperature rises.

• Ghosting may occur when still pictures are displayed continuously. It may disappear after a few moments.

• The screen and cabinet get warm when this TV set is in use. This is not a malfunction.

• The LCD screen contains a small amount of liquid crystal. Mercury is sometimes contained depending on the kind of fluorescent tubes. Follow your local ordinances and regulations for disposal.

Handling and cleaning the screen surface/cabinet of the TV set

Be sure to unplug the AC power cord connected to the TV set from AC power outlet before cleaning.

To avoid material degradation or screen coating degradation, observe the following precautions.

• To remove dust from the screen surface/ cabinet, wipe gently with a soft cloth. If dust is persistent, wipe with a soft cloth slightly moistened with a diluted mild detergent solution.

• Never use any type of abrasive pad, alkaline/acid cleaner, scouring powder, or volatile solvent, such as alcohol, benzene, thinner or insecticide. Using such materials or maintaining prolonged contact with rubber or vinyl materials may result in damage to the screen surface and cabinet material.

• Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.

• When adjusting the angle of the TV set, move it slowly so as to prevent the TV set from moving or slipping off from its table stand.

Optional Equipment

Keep optional components or any equipment emitting electromagnetic radiation away from the TV set. Otherwise picture distortion and/or noisy sound may occur.

Batteries

• Observe the correct polarity when inserting batteries.

• Do not use different types of batteries together or mix old and new batteries.

• Dispose of batteries in an environmentally friendly way. Certain regions may regulate the disposal of batteries. Please consult your local authority.

• Handle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it.

• Do not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room.

Remote and TV Controls/Indicators

Remote and TV controls

Buttons on the TV will work the same as those on the remote.

* In the TV menu, these buttons will work as F/f/G/g/.

•The number 5, N, PROG + and AUDIO buttons on the remote have

a tactile dot. Use the tactile dots as a reference when operating the TV.

Button/Switch Description

1 TV "/1 (TV

standby)

2 1 (Power) Press to turn the TV on or off.

Press to turn the TV on and off from standby mode.

•When ENERGY SAVING SWITCH is off,

the TV cannot be turned on.

• To disconnect the TV, turn off the TV, then unplug the mains lead/AC power cord from the mains/AC power.

3 ENERGY

SAVING SWITCH

Press to turn the TV on or off. When ENERGY SAVING SWITCH is switched off, power consumption is reduced. If the TV is in standby mode when ENERGY SAVING

SWITCH is switched off, switching ENERGY SAVING SWITCH on puts the TV back into

standby mode only.

•When ENERGY SAVING SWITCH is switched off, you will not be able to perform such functions as saving clock settings, downloading EPGs, or updating software.

4 F/f/G/g/ Press F/f/G/g to move the on-screen cursor.

5 HOME Press to display the TV Home Menu (page 31). 6 RETURN Press to return to the previous screen of the

7 PROG +/–//In TV mode: Press to select the next (+) or

8 2 +/–

(Volume)

9 % (Mute) Press to mute the sound. Press again to restore

0 / (Input

select/Text hold)

qa OPTIONS Press to display a list that contains “Device

qs / (Text) Press to display text information (page 16). qd / (Info/

Text reveal)

Press to select/confirm the highlighted item. When playing a photo file: Press F/G to select the previous file. Press f/g to select the next file. When playing a music/video file: Press to pause/start the playback. Press and hold G/g to fast forward/fast reverse, then release the button at the point where you want to resume playback. Press F to start playback from the beginning of the current file. Press f to go to the next file.

displayed menu. When playing a photo/music/video file: Press to stop the playback. (The display returns to the file or folder list.)

previous (–) channel. In Text mode: Press to select the next ( ) or previous ( ) page.

Press to adjust the volume.

the sound.

• In standby mode, if you want to turn on the TV without sound, press this button.

In TV mode: Press to display a list of inputs. In Text mode: Press to hold the current page.

Control” or shortcuts to some setting menus. Use the “Device Control” menu to operate equipment that is compatible with control for HDMI. The listed options vary depending on the input source.

Each time you press the button, the display changes as follows: In digital mode: Details of the current programme In analogue mode: Current channel number and Wide Mode In Text mode (page 16): Reveals hidden information (e.g. answers to a quiz).

t Details of the next programme

t Clock information

(Continued)

qf GUIDE /

(EPG)

(Favourite)

qh Coloured

buttons

qj Number

buttons

qk (Wide

Mode)

ql (Subtitle

setting)

w; SCENE Press to display the “Scene Select” menu.

Press to display the Digital Electronic Programme Guide (EPG) (page 17).

Press to display the Favourite List that you have specified (page 18).

When the coloured buttons are available, an operation guide appears on the screen.

In TV mode: Press to select channels. For channel numbers 10 and above, press the next digit quickly. In Text mode: Press to enter a page number.

Press to change the Wide Mode (page 16).

Press to change the subtitle language (page 42) (in digital mode only).

When you select the desired scene option, the optimum sound quality and picture quality for the selected scene are automatically set. Press F/f/G/g to select the scene option, then press . Cinema: Delivers picture scenes just like those in a theatre-like atmosphere with dynamic sound. Photo: Delivers picture scenes that authentically reproduce the texture and colour of a printed photo. Sports: Delivers picture scenes that let you experience realistic picture and sound like those in a stadium. Music: Delivers sound effects that let you experience dynamic and clear sound like that at a concert. Game: Delivers picture scenes that let you enjoy your game-playing experience to the fullest with superb picture and sound quality. Graphics: Delivers picture scenes that ease your prolonged monitor viewing experience and reduce fatigue by displaying clearer detailed pictures. General: Use this setting when you do not optimise the sound quality and picture quality for any scene. Auto: The optimum sound quality and picture quality are automatically set according to the input source, though there may not be any effect depending on the connected devices.

• When you set Theatre Mode (page 13) to on, the “Scene Select” setting switches to “Cinema” automatically.

• The options you can adjust vary depending on the situation.

• Unavailable options are greyed out or not displayed.

wa AUDIO In analogue mode: Press to change the dual

sound mode (page 36). In digital mode: Press to change the language to be used for the programme currently being viewed (page 42).

ws ANALOG Press to display the analogue channel that was

wd DIGITAL Press to display the digital channel that was

wf (Twin

Picture/PIP)

wg (Previous

channel)

wh THEATRE You can set Theatre Mode to on or off. When

wj SYNC MENU Displays the menu of connected HDMI

wk Buttons for

using optional equipment

wl (Light) Press to illuminate the buttons on the remote so

last viewed. When viewing pictures from connected equipment: Press to return to normal TV mode.

Displays two pictures simultaneously (page 22).

Press to return to the channel that was last viewed (for more than five seconds).

Theatre Mode is set to on, the optimum sound quality (if the TV is connected with an audio system using an HDMI cable) and picture quality for film-based contents are automatically set.

• If you turn the TV off, Theatre Mode is also turned off.

• When you change the “Scene Select” setting, Theatre Mode turns off automatically.

• “Control for HDMI” (BRAVIA Sync) is only available with the connected Sony equipment that has the BRAVIA Sync or BRAVIA Theatre Sync logo or is compatible with control for HDMI.

equipment. While viewing other input screens or TV programmes, “HDMI Device Selection” is displayed when the button is pressed.

• “Control for HDMI” (BRAVIA Sync) is only available with the connected Sony equipment that has the BRAVIA Sync logo or is compatible with control for HDMI.

You can operate the equipment connected to the TV (page 25, 26).

that you can see them easily even if the room is dark.

(Continued)

Indicators

Indicator Description

1 (Picture Off /

Timer)

2 1 (Standby) Lights up in red when the TV is in standby mode. 3 " (Power) Lights up in green when the TV is on. 4 Light sensor

(page 32)

5 Remote control

sensor

Lights up in green when you select “Picture Off” (page 32). Lights up in orange when you set the timer (page 17, 32).

Do not put anything over the sensor, doing so may affect its function.

Receives signals from the remote. Do not put anything over the sensor. The sensor may not work properly.

About the operation guide on the TV screen

Operation Guide Example: Press or RETURN (see 4 on page 11 or 6 on page 11).

The operation guide provides help on how to operate the TV using the remote, and is displayed at the bottom of the screen. Use the remote buttons shown on the operation guide.

Watching TV

2 Press DIGITAL to switch to digital mode,

or press ANALOG to switch to analogue mode.

The available channels vary depending on the mode.

3 Press the number buttons or PROG +/– to

select a TV channel.

To select a digital programme using the Digital Electronic Programme Guide (EPG), see page 17. In digital mode, an information banner appears briefly. Each time you press

, the banner changes cyclically as follows: Current programme information t Next programme information t No banner The following icons may be indicated on the banner.

Watching TV

1 Press 1 on the TV to turn on the TV.

When the TV cannot be turned on, switch ENERGY SAVING SWITCH on, then press 1 on the TV (page 10). When the TV is in standby mode (the 1 (standby) indicator on the TV front panel is red), press TV "/1 on the remote to turn on the TV.

: Radio service : Scrambled/Subscription service

: Subtitles available

: Subtitles available for the hearing

impaired

: Multiple audio languages available

c:Reminder

: Recommended minimum age for

current programme (ages from 4 to

18)

: Parental Lock

(Continued)

To access Text

Press /. Each time you press /, the display changes cyclically as follows: Text and TV picture t Tex t t No Text (exit the Text service) To select a page, press the number buttons or

/. To hold a page, press . To reveal hidden information, press .

• You can also jump directly to a page by selecting

the page number displayed on the screen. Press and F/f/G/g to select the page number, then press

• When four coloured items appear at the bottom of

the Text page, you can access pages quickly and easily (Fastext). Press the corresponding coloured button to access the page.

To change the Wide Mode manually

Press repeatedly to select the desired Wide Mode.

Wide Zoom*

Enlarges the centre portion of the picture. The left and right edges of the picture are stretched to fill the 16:9 screen.

Normal

Displays the 4:3 picture in its original size. Side bars are shown to fill the 16:9 screen.

Full

Stretches the 4:3 picture horizontally, to fill the 16:9 screen.

Zoom*

Displays the cinemascopic (letter box format) picture in the correct proportion.

* Parts of the top and bottom of the picture may be cut off.

You can adjust the vertical position of the picture. Press F/f to move the picture up or down (e.g. to read subtitles).

• When you select “Wide Zoom,” some characters and/or letters at the top and the bottom of the picture may not be visible. In such a case, adjust “Vertical Size” in the “Screen” menu (page 36).

• When “Auto Wide” (page 36) is set to “On,” the TV will automatically select the best mode to suit the input from an external equipment.

• If 720p, 1080i or 1080p source pictures are displayed with black borders on the screen edges, select “Wide Zoom” or “Zoom” to adjust the pictures.

Using the Digital Electronic Programme Guide (EPG) (for digital channels only)

1 In digital mode, press GUIDE. 2 Perform the desired operation as shown in

the following table or displayed on the screen.

Digital Electronic Programme Guide (EPG)

To Do this

View a programme Press F/f/G/g to select a programme, then press .

Turn off the EPG Press GUIDE.

Watching TV

Sort programme information by category – Category list

Set a programme to be displayed automatically on the screen when it starts – Reminder

Cancel a reminder – Timer list

1 Press the blue button. 2 Press F/f to select a category, then press .

1 Press F/f/G/g to select a future programme you want to display,

then press .

2 Press F/f to select “Reminder,” then press .

A c symbol appears next to the programme’s information. The

indicator on the TV front panel lights up in orange.

• If you switch the TV to standby mode, the TV will automatically turn on when the programme starts.

1 Press . 2 Press F/f to select “Timer list,” then press . 3 Press F/f to select the programme you want to cancel, then

press .

4 Press to select “Cancel Timer.”

A display appears to confirm that you want to cancel the programme.

5 Press G/g to select “Yes,” then press .

Using the Favourite List

Analogue Favourites

nalogue Favourite List

To Do this

Watch a channel Press .

Turn off the Favourite list Press .

Add a current channel to the Favourite list

Remove a channel from the Favourite list

Press F/f to select “Add to Favourites,” then press .

1 Press F/f to select “Edit Favourites,” then press .

The “Favourite Set-up” screen appears.

2 Press F/f to select the channel number, then press . 3 Press F/f to select “– – –,” then press .

Digital Favourites

The Favourite feature lets you select programmes from a list of up to 16 favourite channels that you specify.

1 In analogue mode, press . 2 Perform the desired operation as shown in

the following table or displayed on the screen.

You can specify up to four of your favourite channel lists.

1 In digital mode, press . 2 Perform the desired operation as shown in

the following table or displayed on the screen.

Digital Favourite List

To Do this

Turn off the Favourite list Press RETURN.

Add or remove channels in a Favourite list

1 Press the blue button.

Go to step 2 when you add channels for the first time or the Favourite list is empty.

2 Press the yellow button to select the Favourite list to edit. 3 Press F/f/G/g to select the channel to add or remove, then press

Watch a channel

1 Press the yellow button to select a Favourite list. 2 Press F/f to select a channel, then press .

Remove all channels from a Favourite list

1 Press the blue button. 2 Press the yellow button to select the Favourite list to edit. 3 Press the blue button. 4 Press G/g to select “Yes,” then press .

Using Optional Equipment

Connecting Optional Equipment

You can connect a wide range of optional equipment to your TV.

Broadband router

Digital still camera

Using Optional Equipment

Camcorder

Video game equipment

DVD player

Hi-Fi audio equipment

DVD player with component output

USB storage media

Camcorder

Headphones

Audio system

Camcorder

VCR

Home theatre system with digital input

DVD player

PC (HDMI-output)

Blu-ray disc player

(Continued)

Connecting audio-video equipment (quality order, high to low)

Connect to Connect with Description

4 HDMI IN 1, 2, 3, or 4

HDMI cable Digital video and audio signals are input from the connected

equipment. In addition, when you connect the equipment that is compatible with control for HDMI, communication with the connected equipment is supported. See page 39 to set up this communication. If the equipment has a DVI socket/jack, connect the DVI socket/jack to the HDMI IN 1 socket/jack through a DVI HDMI adaptor interface (not supplied), and connect the equipment’s audio out socket/jack to the PC/HDMI 1 AUDIO IN socket/jack in the PC IN sockets/jacks. (The PC/HDMI 1 AUDIO IN socket/jack is used as the audio in socket/jack for both the PC IN and HDMI IN 1 sockets/jacks.)

• Be sure to use only an authorised HDMI cable bearing the HDMI logo. We recommend that you use a Sony HDMI cable (high speed type).

• When connecting an audio system that is compatible with control for HDMI, be sure to also connect it to the DIGITAL AUDIO OUT (OPTICAL) socket/jack.

3 / 1 or 2 Component video

cable, audio cable

When using the component video jack 1 as the video jack

3, select “Video 3” in the “Video 3/Component 1 Input”

menu (page 39).

• You cannot use the component video jack 1 and the video jack 3 at the same time.

2 9 1, 1 or 2, and 1 or 2

S-video cable or composite video cable, audio cable

To avoid picture noise, do not connect the camcorder to the video jack 1 and the S video jack 1 at the same time. If you connect a mono equipment, connect to the L (MONO) jack 1 or 2. When using the video jack 1 and audio jack 1 as output jacks, select “Output” in the “Video 1 Input/Output” menu (page 39).

Connecting audio/portable equipment

Connect to Connect with Description

5 DIGITAL AUDIO OUT (OPTICAL)

1 Audio cable You can listen to TV sound on the connected Hi-Fi audio

8 USB USB cable You can enjoy photo/music/video files stored in a Sony

Optical audio cable

You can listen to TV sound on the connected Home theatre system with digital input.

equipment.

digital still camera or camcorder (page 23).

Connecting other equipment

Connect to Connect with Description

6 / PC IN PC cable with

ferrites, audio cable

7 LAN LAN cable You can enjoy the TV’s network features (page 28). 0 i Headphones You can listen to TV sound through headphones.

It is indispensable to use a PC cable with ferrite cores.

Using Optional Equipment

Viewing Pictures from Connected Equipment

Turn on the connected equipment, then perform the following operation.

1 Press . 2 Press F/f to select

the desired input source, then press .

To view two pictures simultaneously – Twin Picture/PIP (Picture in Picture)

You can view two pictures (external or PC input and TV programme) on the screen simultaneously. Each time you press , the viewing mode changes cyclically from “Twin Picture,” to “PIP,” to single picture mode.

For PIP mode

1 Press again.

The mode changes from “Twin Picture” to “PIP.” The picture from the connected PC or equipment is displayed in full size and the TV programme is displayed in the bottom right corner. The sub screen picture is framed in gray when the main screen is audible. You can use F/f to move the sub screen position.

2 Press or repeatedly to return to

single picture mode.

• “PC Power Management” (page 32) is not available in PIP mode.

• You can select the TV channel with the number buttons or

For Twin Picture mode

1 Press . (except HDMI (PC) or PC

2 Press or repeatedly to return to

PROG +/–.

input)

The picture from the connected equipment is displayed on the left and the TV programme is displayed on the right. The picture framed in gray is audible.

single picture mode.

Playing back Photo/Music/ Video via USB

You can enjoy photo/music/video files stored in a Sony digital still camera or camcorder through a USB cable or USB storage device on your TV.

1 Connect a supported USB device to the

TV.

2 Press HOME. 3 Press G/g to select “Photo,” “Music,” or

“Video.”

4 Press F/f to select a USB device, then

press .

The file or folder list appears. To display a thumbnail list, press the yellow button while the list is displayed.

5 Press F/f to select a file or folder, then

press .

When you select a folder, select a file, then press . Playback starts.

Photo Playback Auto Start

The TV automatically starts photo playback when the TV is turned on and a digital still camera or other device storing photo files is connected to the USB port then turned on (page 38).

• While the TV is accessing the data on the USB device, observe the following: – Do not turn off the TV or connected USB

device. – Do not disconnect the USB cable. – Do not remove the USB device. The data on the USB device may be damaged.

• Sony will not be held liable for any damage to, or loss of, data on the recording media due to a malfunction of any connected devices or the TV.

• Playback does not start automatically if the TV is turned on after connecting the digital still camera or other device to the USB port.

• USB playback is supported for the following photo file formats: – JPEG (JPEG format files with the extension

“.jpg” and conforming to DCF 2.0 or Exif 2.21)

– RAW (ARW/ARW 2.0 format files with the

extension “.arw.” For preview only.)

• USB playback is supported for the following music file format: – MP3 (files with the extension “.mp3” that have

not been copyrighted)

• USB playback is supported for the following video file format: – MPEG1 (files with the extension “.mpg”)

• Photo Playback Auto Start works only for photo files in the newest digital still camera folder (DCF-compliant, highest-numbered “DCIM” folder).

• Playback may not start automatically when some digital still cameras (such as cameras with internal memory) are connected.

• The file name and folder name support only English.

• When you connect a Sony digital still camera, set the camera’s USB connection mode to Auto or “Mass Storage.” For more information about USB connection mode, refer to the instructions supplied with your digital camera.

• Check the website below for updated information about compatible USB devices. http://www.sony-asia.com/bravia/flash.html

• Use a USB storage device that is compliant with USB Mass Storage Class standards.

• You can register the background music to be played during a slideshow using (Photo). While playing back music, press OPTIONS, then select “Add to Slideshow,” or while displaying a photograph, press OPTIONS, then select “Music Selection.”

To display a photograph — Picture Frame

You can display a photograph on the screen for a selected period of time. After that period, the TV automatically switches itself into standby mode.

1 Select a photograph (page 23). 2 Press OPTIONS while the selected

photograph is displayed, then press F/f to select “File Options” and press .

3 Press F/f to select “Picture Frame Image”

and press .

4 Press RETURN repeatedly to return to

the Home Menu.

5 Press G/g to select “Photo,” then select

“Picture Frame” and press .

The TV is switched to Picture Frame mode, and the selected photograph is displayed on the screen.

(Continued)

Using Optional Equipment

To set the duration of displaying a photograph

Press OPTIONS, then select “Duration” and press . Then, select the duration, and press . The counter appears on the screen.

To return to the XMB™

Press RETURN.

• If the photograph is selected from a USB device, it must remain connected to the TV.

• If “Sleep Timer” is activated, the TV automatically will switch into standby mode.

To display a photograph with the location on the map

When using a digital still camera with GPS function, it is possible to display a photograph with a map of the location where the photograph was taken using a function of GPS for recording longitude and latitude. Because map information is downloaded from the Internet online map service, the network connection must be required and the TV has to be connected to the network (page 28).

1 Select a photograph (page 23). 2 Press the green/red buttons to zoom in/out

on the map.

To change the display position of the map on the TV screen, press the blue button repeatedly.

• A map can be displayed in the case of photograph’s Exif data includes a date information, and the associated longitude and latitude information (“Log files”) has been recorded using a Sony GPS unit. Follow the procedure described below.

1 Connect the GPS unit to the USB port. 2 Press HOME. 3 Press G/g to select “Photo.” 4 Press F/f to select the GPS unit, then

press

5 Select the following items using F/f, then

set them using F/f.

–Time Zone –DST

6 Select “Yes,” then press .

The GPS log files are loaded.

7 Disconnect the GPS unit and connect the

device on which the photograph is stored.

8 Select a photograph (page 23). 9 Press the green/red buttons to zoom in/out

on the map.

• Because the Internet online map service is provided by a third party, service may be changed or terminated without prior notification to the user.

• The position indicated on the map may differ depending on the digital still camera.

• Only a large-scale map that cannot be zoomed in or out is displayed if the TV is not connected to the Internet or the Internet online map service is terminated.

Using BRAVIA Sync with Control for HDMI

The control for HDMI function enables the TV to communicate with the connected equipment that is compatible with the function, using HDMI CEC (Consumer Electronics Control). For example, by connecting Sony equipment that is compatible with control for HDMI (with HDMI cables), you can control them together. Be sure to connect the equipment correctly, and make the necessary settings.

Control for HDMI

• Automatically turns the connected

equipment off when you switch the TV to standby mode using the remote.

• Automatically turns the TV on and

switches the input to the connected equipment when the equipment starts to play.

• If you turn on a connected audio system

while the TV is on, the sound output switches from the TV speaker to the audio system.

• Adjusts the volume (2 +/–) and mutes the

sound (%) of a connected audio system.

• You can operate the connected Sony

equipment that has the BRAVIA Sync logo by the TV remote by pressing:

– N/x/X/m/M/./> to operate the

connected equipment directly.

– SYNC MENU to display the menu of the connected

HDMI equipment on the screen. After displaying the menu, you can operate the menu screen by using F/f/G/g, , colour buttons, and RETURN.

– OPTIONS to display “Device Control,” then select

options from “Options” and “Content List” to operate the equipment.

– Refer to the instruction manual of the equipment for

available control.

• If “Control for HDMI” of the TV is set to

“On,” “Control for HDMI” of the connected equipment is also automatically switched to “On.”

To connect the equipment that is compatible with control for HDMI

Connect the compatible equipment and the TV with an HDMI cable. When connecting an audio system, be sure to also connect the DIGITAL AUDIO OUT (OPTICAL) jack of the TV and the audio system using an optical audio cable. For details, see page 19.

To make the control for HDMI settings

The control for HDMI settings must be set on both the TV side and connected equipment side. See “HDMI Set-up” (page 39) for the TV side settings. For settings on the connected equipment, refer to the operating instructions for that equipment.

Using Optional Equipment

Operating Optional Equipment using the TV Remote

Buttons for using optional equipment

For details, refer to the operating instructions supplied with the connected equipment.

Item Description

1 "/1 Turns on or off the optional

equipment you have selected with the function buttons.

2 Function

buttons

3 BD/DVD

operating buttons

4 DVD record

buttons

5 F1/F2 • Selects a disc when using a

6 BD/DVD

7 BD/DVD

TOP MENU

Allows you to operate the corresponding equipment. For details, see “Programming the remote” (page 26).

• ./>: Goes to the

beginning of the previous/ next title/chapter/scene/ track.

• / : Replays the scene/ briefly fast forwards the scene.

• m/M: Fast reverses/fast forwards the disc when pressed during playback.

• N: Plays a disc at normal speed.

• X: Pauses the playback.

• x: Stops the playback.

• z REC: Starts the recording.

• X REC PAUSE: Pauses the recording.

• x REC STOP: Stops the recording.

disc changer.

• Selects a function when using a combination unit (e.g. a DVD/HDD).

Displays the BD/DVD disc menu.

Displays the top menu of the BD/DVD disc.

•The N button has a tactile dot. Use the tactile dot

as a reference when operating other equipment.

Programming the remote

This remote is preset to operate Sony TVs, and most Sony Blu-ray disc players, DVD players, DVD/HDD recorders, and audio systems (Home Theatre, etc.). To control such Sony Blu-ray disc players, DVD players, and DVD/HDD recorders, programme the remote as follows.

• Before you start, look up the code of your equipment from the “Manufacturer’s codes” (page 27).

If your equipment is not working, or some of the functions do not work

Enter the correct code or try the next code

listed for the brand. Note that the list may not include codes for all models of all brands.

To return to normal TV operation

Press the TV function button.

1 Press and hold the BD, DVD, or AMP

function button you want to programme on the remote, then press .

The selected function button (BD, DVD, or AMP) flashes.

2 Press the number buttons to enter the

manufacturer’s code number when the function button flashes.

If you do not enter the code within 30 seconds, you need to go back to step 1.

3 Press .

The selected function button flashes twice. If the selected function button flashes five times, repeat from step 1.

4 Turn on your equipment and check that

the following main functions work.

For Blu-ray disc players, DVD players and DVD/HDD recorders, check:

N (playback), x (stop), m (rewind), M (fast forward), channel selection.

For DVD players and DVD/HDD recorders, check:

TOP MENU/MENU and F/f/G/g.

Manufacturer’s codes

DVD players

Manufacturer Code

SONY 0001, 0024, 0023, 0025, 0038

Blu-ray disc (BD) players

Manufacturer Code

SONY 0501 – 0503

DVD/video cassette recorders

Manufacturer Code

SONY 0207, 0222

DVD/HDD recorders

Manufacturer Code

SONY 0219, 0220, 0221

VCRs

Manufacturer Code

SONY VTR1:Betamax 1001, 1007, 1010, 1011

VTR2:8mm 1002, 1008 VTR3:VHS 1003, 1009 VTR4:DV 1004 VTR5:DV 1005 VTR6:DV 1006

DAV Home Theatre System

Manufacturer Code

SONY (DAV) 4501 – 4506

AV receivers

Manufacturer Code

SONY 4001, 4002, 4056, 4057, 4085

Digital terrestrial receivers

Manufacturer Code

SONY 3101, 3102 now TV 3103, 3104 CABLE TV 3105

Using Optional Equipment

Using Home Network Features

With this TV, you can enjoy contents stored in DLNA-compatible devices on the home network. Devices that store and provide contents, such as photo/music/video files, are called “server.” The TV receives the photo/music/video files from the server via the network, and you can enjoy them on the TV even in other rooms. To enjoy the home network, a DLNAcompatible device is necessary as a server. Confirm available network server on page 29. In addition, when you connect your TV to the Internet, you can enjoy displaying a photograph that shows its location on the map (page 24).

• You will need to contract with an Internet service provider to connect to the Internet.

Connecting to the Network

Network cable (not supplied)

Broadband router

To network devices

Network cable (not supplied)

DSL modem/ Cable modem

Enjoying Photo/Music/ Video Files via the Network

You can enjoy photo/music/video files on the server easily by selecting an icon on the Home Menu of the TV.

1 Press HOME. 2 Press G/g to select “Photo,” “Music,” or

“Video.”

3 Press F/f to select a server, then press .

The file or folder list appears. To display the thumbnail list, press the yellow button while the list is displayed.

When the server cannot be found

See “Checking the Network Connection” (page 29) and “Adjusting the Server Display Settings” (page 30).

4 Press F/f to select a file or folder, then

press .

When you select a folder, select a file, then press . Playback starts.

• A map can be displayed with a photograph in the case of longitude and latitude information has been recorded to photograph’s Exif data (page 24).

• Depending on the network device, it may be necessary to register the TV with the network device.

• Picture quality may appear coarse when using (Photo) because images may be enlarged depending on the file. Also, images may not fill the entire screen depending on the image size and aspect ratio.

• Some photo files may take some time to be displayed when using (Photo).

• To play files that are received from a network device, they need to conform to one of the following file formats: – Still images: JPEG format – Music: MP3 format or linear PCM format – Video: The following file formats stored on the

server: AVCHD, HDV, MPEG2-PS. In some cases, you cannot play files of even these formats.

Internet

Depending on the network device, the file format may be converted before transfer. In such cases, the file format resulting after conversion is used for playback. For details, refer to the instruction manual for the network device being used. Even files conforming to one of the file formats given above cannot be played in some cases.

• Recommended DLNA-compatible devices are following. – VAIO with “VAIO Media Integrated Server ver.

5.0” or later version pre-installed

– VAIO with “VAIO Media plus ver. 1.0/1.1” pre-

installed

Other DLNA device may not work.

• The file name and folder name support only English.

To enjoy photographs, music and videos on the TV screen by operating devices – Renderer

Renderer is a feature for playing photo, music and video files stored in network devices (digital still cameras, mobile phones, etc.) on the TV by operating the controller device in question. To use this feature, a renderercompatible device such as a digital still camera or mobile phone is required as the controller. Refer as well to the instruction manual supplied with the controller.

1 Set “Renderer Function,” “Renderer

Access Control” and “Renderer Set-up” in “Network Settings” if necessary (page 43).

2 Play the file selected using the controller

on the TV.

The file is played on the TV over the connected network. Use the controller or the TV’s remote to perform operations during playback.

Checking the Network Connection

Enter the respective (alphanumeric) values for your router. The items that need to be set may differ, depending on the Internet service provider or the router. For details, refer to the instruction manuals that have been provided by your Internet service provider or supplied with the router.

1 Press HOME. 2 Press G to select “Settings.” 3 Press F/f to select “Network Settings,”

then press .

4 Select “Network,” then press . 5 Select “IP Address Settings,” then press

6 Select an item, and press .

When you select “DHCP (DNS automatic)”

Go to step 7.

When you select “DHCP (DNS manual)”

Set “Primary DNS”/“Secondary DNS” using F/f/g and the number buttons.

When you select “Manual”

Set the following items using F/f/g and the number buttons.

• IP Address

• Subnet Mask

• Default Gateway

• Primary DNS/Secondary DNS

If your ISP has a specific proxy server setting

Press OPTIONS, then press F/f to select “Proxy Set-up” and press . Then enter the settings.

7 Press . 8 Press g to select “Test,” then press . 9 Press G/g to select “Yes,” then press .

The network diagnostic starts. When the message “Connection successful.” appears, press RETURN repeatedly to exit.

• If “Connection successful.” does not appear, see “Troubleshooting” (page 50).

Using Home Network Features

Adjusting the Server Display Settings

You can select home network servers to be displayed on the Home Menu. Up to 10 servers can be displayed on the Home Menu automatically.

1 Set the server to allow connections from

the TV.

For details on settings on the server, refer to the Operating Instructions supplied with the server.

2 Press HOME. 3 Press G/g to select “Settings.” 4 Press F/f to select “Network Settings,”

then press .

5 Select “Server Display Settings,” then

press .

6 Select the server you want to display on

the Home Menu, then press .

7 Select “Yes,” then press .

If you cannot connect to your home network

The TV can check if the server is being correctly recognised.

1 Press HOME. 2 Press G/g to select “Settings.” 3 Press F/f to select “Network Settings,”

then press .

4 Select “Server Diagnostics,” then press . 5 Select “Yes,” then press .

The server diagnostic starts. When the server diagnostic is complete, the diagnostic result list appears.

6 Select the server you want to confirm,

then press .

The diagnostic results of the selected server appear.

• If the diagnostic results indicate a failure, look up the possible causes and what to do, and check connections and settings. For details, see “Troubleshooting” (page 50).

Using Menu Functions

Navigating through TV Home Menu on XMB™

The XMB™ (XrossMediaBar) is a menu of BRAVIA features and input sources displayed on the TV screen. The XMB™ is an easy way to select programmes and adjust settings on your BRAVIA TV.

1 Press HOME to display the XMB™.

Media Category Bar

Category Object Bar

2 Press G/g to select the category.

Media category icon Description

Settings You can make advanced settings and adjustments. For details about

settings, see page 32.

Photo You can enjoy photo files via USB devices or the network (page 23,

28).

Music You can enjoy music files via USB devices or the network (page 23,

28).

Video You can enjoy video files via USB devices or the network (page 23,

28).

Digital You can select a digital channel, Digital Favourite List (page 18), or

Digital Electronic Programme Guide (EPG) (page 17).

Analogue You can select an analogue channel or Analogue Favourite List

(page 18). To hide the list of analogue channels, set “Programme List Display” to “Off” (page 40).

External Inputs You can select equipment connected to the TV.

To assign a label to an external input, see “Video Labels” (page 39).

3 Press F/f to select the item, then press . 4 Follow the instructions on the screen. 5 Press HOME to exit.

• The options you can adjust vary depending on the situation.

• Unavailable options are greyed out or not displayed.

Using Menu Functions

TV Settings Menu

System Update

Used to update the TV’s system software in the future.

BRAVIA Tips

Introduces how to enjoy the TV.

Clock/Timers

Sleep Timer Sets the TV to automatically switch to standby mode after a certain amount of

On Timer Sets the TV to automatically turn on from standby mode.

Auto Clock Update Switches to digital mode and obtains the time.

Clock Set Allows you to adjust the clock manually.

time. When “Sleep Timer” is activated, the (Timer) indicator on the TV front panel lights up in orange.

• When you turn off the TV and turn it on again, “Sleep Timer” is reset to “Off.”

• When the TV is receiving digital channels, you cannot adjust the clock manually, because the clock automatically receives the time code from the broadcast signal.

Eco

Reset Resets all the “Eco” settings to the factory settings.

Power Saving Reduces power consumption of the TV by adjusting the backlight.

Idle TV Standby Turns the TV off after it has been kept idle for the preset length of time.

PC Power Management

Light Sensor Automatically optimises the picture settings according to the ambient light in the

When you select “Picture Off,” the picture is switched off, and the (Picture Off) indicator on the TV front panel lights up in green. The sound remains unchanged.

Switches the TV to standby mode when the TV receives no signal from the PC input source for 30 seconds.

room.

• Do not put anything over the sensor, doing so may affect its function. See page 14 to check the position of the sensor.

Picture

Target Inputs Allows you to select whether to use the common settings or to make custom

Picture Mode Sets a picture mode. The options that can be selected differ depending on the

Reset Resets all the “Picture” settings to the factory settings excluding “Target Inputs,”

Backlight Adjusts the brightness of the backlight.

Picture Increases or decreases picture contrast.

Brightness Brightens or darkens the picture.

Colour Increases or decreases colour intensity.

Hue Increases or decreases the green tones and red tones.

settings for the input you are currently viewing.

Common Applies common settings to all inputs in which “Target

Name of current input (e.g. Video

“Scene Select” settings.

Vivid Enhances picture contrast and sharpness.

Standard For standard pictures. Recommended for home

Custom Allows you to store your preferred settings.

Cinema For viewing film-based content. Most suitable when viewing

Photo-Vivid For viewing photographs. Enhances picture contrast and

Photo-Standard For viewing photographs. Provides the optimum picture

Photo-Original For viewing photographs. Represents the picture quality used

Photo-Custom For viewing photographs. Allows you to store your preferred

Sports Provides the optimum picture quality for viewing sports.

Game Most suitable for when playing games on your TV.

Graphics Provides the optimum picture quality for viewing graphics.

“Picture Mode” and “Advanced Settings.”

Inputs” is set to “Common.”

Allows you to make custom settings for the input.

entertainment.

the TV in a theatre-like environment.

sharpness.

quality for viewing in the home.

when imaging developed photographs.

settings.

• “Hue” can be adjusted only for the NTSC colour signal/system (e.g. U.S.A. video tapes).

Colour Temperature Adjusts the whiteness of the picture.

Cool Gives white colours a blue tint.

Neutral Gives white colours a neutral tint.

Warm 1/Warm 2 Gives white colours a red tint. “Warm 2” gives a redder tint

• “Warm 1” and “Warm 2” are not available when “Picture Mode” is set to “Vivid” (or “Photo-Vivid”).

Sharpness Sharpens or softens the picture.

Noise Reduction Reduces the noise level of pictures (snowy pictures).

than “Warm 1.”

Using Menu Functions

(Continued)

MPEG Noise Reduction

Motionflow Provides smoother picture movement and reduces picture blur.

Reduces picture noise in MPEG-compressed videos. This is effective when viewing a DVD or digital broadcast.

High Provides smoother picture movement such as for film-based

contents.

Standard Provides smooth picture movement. Use this setting for

standard use.

Off Use this setting when the “High” or “Standard” settings result

in noise.

• Depending on the video, you may not see the effect visually, even if you have changed the setting.

Cinema Drive Provides improved picture movement when playing DVD or VCR images taken on

film, reducing picture blur and graininess.

Auto 1 Provides smoother picture movement than the original film-

based content. Use this setting for standard use.

Auto 2 Provides the original film-based content as is.

• If the image contains irregular signals or too much noise, “Cinema Drive” is automatically turned off even if “Auto 1” or “Auto 2” is selected.

Advanced Settings Allows you to set “Picture” settings in more detail. These settings are not available

when “Picture Mode” is set to “Vivid” (or “Photo-Vivid”).

Reset Resets all the advanced settings to the factory settings.

Black Corrector Enhances black areas of the picture for stronger contrast.

Adv. Contrast Enhancer

Gamma Adjusts the balance between bright and dark areas of the

Auto Light Limiter

Clear White Emphasises white colours.

Colour Space Changes the colour reproduction gamut. “Wide” reproduces

Live Colour Makes colours more vivid.

White Balance Adjusts the temperature of each colour.

Automatically adjusts “Backlight” and “Picture” to the most suitable settings judging from the brightness of the screen. This setting is especially effective for dark images scenes, and will increase the contrast distinction of the darker picture scenes.

picture.

Reduces glare such as in scenes where the entire screen is white.

the vivid colour and “Standard” reproduces the standard colour.

Sound

Target Inputs Allows you to select whether to use the common settings or to make custom

Sound Mode Sets a sound mode. “Sound Mode” includes options best suited for video and

Reset Resets all the “Sound” settings to the factory settings excluding “Target Inputs,”

Treble Adjusts higher-pitched sounds.

Bass Adjusts lower-pitched sounds.

Balance Emphasises the left or right speaker.

Intelligent Volume Keeps volume level constant across all programmes and adverts (e.g. adverts tend

Volume Offset Adjusts the volume level of the current input relative to other inputs, when “Target

Surround Allows you to select the suitable surround effects depending on the genre of TV

Voice Zoom Adjusts the sound level of human voices. For example, if the voice of a news

Sound Enhancer Reproduces clear sound by complementing high-frequency bands.

Sound Booster Produces a fuller sound for more impact, by emphasising the treble and bass

settings for the input you are currently viewing.

Common Applies common settings to all inputs in which “Target

Name of current input (e.g. Video

photographs, respectively. The options that can be selected differ depending on the “Scene Select” settings.

Dynamic Enhances the treble and bass sounds.

Standard For standard sounds. Recommended for home entertainment.

Clear Voice Makes voice sound clearer.

“Sound Mode” and “Dual Sound.”

to be louder than programmes).

Inputs” is set to the current input name (e.g. Video 1).

programme (movie, sport, music, etc.) or video game. The options that can be selected differ depending on the “Scene Select” settings.

S-FORCE Front Surround

Simulated Stereo Adds a surround-like effect to mono programmes.

Cinema Delivers surround effects just like the high-grade audio

Music Delivers surround effects that make you feel like you are

Sports Delivers surround effects that make you feel like you are

Game Delivers surround effects that enhance game sound.

Off Converts and reproduces multi-ch audio to 2ch. In the case of

announcer is indistinct, you can turn up this setting to make the voice louder. Conversely, if you are watching a sports programme, you can turn down this setting to soften the voice of the commentator.

sounds.

Inputs” is set to “Common.”

Allows you to make custom settings for the input.

Delivers surround effects that help you enjoy the virtual multi-ch surround audio with just the two internal TV speakers.

systems found in movie theatres.

surrounded by sound as in a music hall.

watching a live sports contest.

other audio formats, the original audio is reproduced.

Using Menu Functions

(Continued)

Dual Sound Sets the sound from the speaker for a stereo or bilingual broadcast.

Stereo/Mono For stereo broadcasts.

Main/Sub/Mono For bilingual broadcasts, select “Main” for sound channel 1,

“Sub” for sound channel 2, or “Mono” for mono channel, if available.

• For other equipment connected to the TV, set “Dual Sound” to “Stereo,” “Main,” or “Sub.”

Screen (for inputs other than a PC)

Target Inputs Allows you to select whether to use the common settings or to make custom

Wide Mode See “To change the Wide Mode manually” (page 16).

Auto Wide Automatically changes “Wide Mode” to match input signals. If you want to use the

4:3 Default Sets the default Wide Mode for 4:3 broadcasts.

Display Area Adjusts the picture display area.

Horizontal Shift Adjusts the horizontal position of the picture.

Vertical Shift Adjusts the vertical position of the picture when “Wide Mode” is set to “Wide

Vertical Size Adjusts the vertical size of the picture when “Wide Mode” is set to “Wide Zoom.”

settings for the input you are currently viewing.

Common Applies common settings to all inputs in which “Target

Name of current input (e.g. Video

setting that you specified in “Wide Mode,” select “Off.”

Wide Zoom Enlarges the 4:3 picture to fill the 16:9 screen, keeping the

Normal Displays conventional 4:3 broadcasts in the correct

Off Uses the setting that you specified in “Wide Mode.”

Auto Automatically switches to the most appropriate display area.

Full Pixel Displays pictures in their original size when parts of the

+1 Displays pictures in their original size.

Normal Displays pictures in their recommended size.

-1/-2 Enlarges the picture so that the edges are outside the visible

Zoom” or “Zoom.”

Inputs” is set to “Common.”

Allows you to make custom settings for the input.

original image as much as possible.

proportion.

picture are cut off.

display area.

Screen (for PC input)

Auto Adjustment Automatically adjusts the display position, phase, and pitch of the picture when the

TV receives an input signal from the connected PC.

• “Auto Adjustment” may not work well with certain input signals. In such cases, manually adjust “Phase,” “Pitch,” “Horizontal Shift,” and “Vertical Shift.”

Reset Resets all PC screen settings to factory settings.

Phase Adjusts the phase when the screen flickers.

Pitch Adjusts the pitch when the picture has unwanted vertical stripes.

Horizontal Shift Adjusts the horizontal position of the picture.

Vertical Shift Adjusts the vertical position of the picture.

Wide Mode Sets “Wide Mode” for displaying pictures from your PC.

Normal Displays the picture in its original size.

Full 1 Enlarges the picture to fill the vertical display area, while

maintaining its original proportion.

Full 2 Enlarges the picture to fill the display area.

Video Settings

x.v.Colour Displays moving pictures more faithfully to the original source by matching the

colour space of the TV to that of the source.

• If the input signal is HDMI (RGB), the setting is automatically set to “Normal,” even if you select “x.v.Colour.”

Photo Colour Space Selects an option (sRGB, sYCC, Adobe RGB) to set the picture quality best suited

to the colour space of the photograph. If equipment converts the output colour space of a photograph from sYCC or Adobe RGB to x.v.Colour or xvYCC, select “sYCC.” Results in picture quality best suited to the original colour space. If an RGB signal is being input through HDMI input, automatically set to “sRGB” even if you have selected “sYCC.”

Colour System Sets the colour system (“Auto,” “PAL,” “SECAM,” “NTSC3.58,” or “NTSC4.43”)

according to the input signal from the input source.

Using Menu Functions

Audio Settings

Speaker TV Speaker Turns on and outputs the TV’s sound from the TV speakers.

Audio System Turns off the TV speakers and outputs the TV’s sound from

Audio Out Variable When using an external audio system, volume output from

Fixed The audio output of the TV is fixed. Use your audio

Headphone Settings i Speaker Link Switches the TV’s internal speakers on/off when you connect

i Volume Adjusts the volume of the headphones when “i Speaker

i Dual Sound Sets the sound from the headphones for a bilingual broadcast.

Optical Out Sets the audio signal that is output from the DIGITAL AUDIO OUT (OPTICAL)

jack of the TV. Set to “Auto,” when connecting equipment compatible with Dolby Digital. Set to “PCM,” when connecting equipment not compatible with Dolby Digital.

external audio equipment connected to the audio output sockets/jacks on the TV.

audio out can be controlled using the TV’s remote.

receiver’s volume control to adjust the volume (and other audio settings) through your audio system.

headphones to the TV.

Link” is set to “Off.”

Set-up

USB Auto Start Automatically starts photo playback when the TV is turned on and a digital still

camera or other device storing photo files is connected to the USB port then turned on.

• Playback does not start automatically if the TV is turned on after connecting the digital still camera or other device to the USB port.

Quick Start The TV turns on faster than usual by turning on the power using the remote.

However, power consumption in standby mode is approximately 16 watts higher than usual. Up to 3 out of 5 time zones can be set.

Video Labels Assigns an icon or name to equipment connected to the side and rear sockets/jacks.

The icon and name appear briefly on the screen when you select the equipment.

1 Press F/f to select the desired input source, then press .

Skip Inputs For each input, sets whether or not to display on the Home

Menu or in a list of inputs that will appear when you press

Auto

Displays the icon and name only when the equipment is connected.

Always Display

Always displays the icon and name regardless of whether or not the equipment is connected.

Skip

Does not display the icon and name even if the equipment is connected.

2 Press g to assign an icon and name.

Label Inputs Uses preset labels to assign a name to connected equipment.

Allows you to create your own label when you select “Edit.”

Edit

Allows you to edit the name in the edit screen and choose the appropriate icon.

Video 1 Input/Output Switches the video jack 1 and audio jack 1 between input and output

modes. When set to “Output,” outputs whatever is being viewed on the screen (except signals from the / 1 or 2, HDMI IN1, 2, 3, or 4, and / PC IN sockets/ jacks).

Auto S Video Sets the input signal from S video socket/jack Video 1 when you have

equipment connected to the Video 1 and Video 1 sockets/jacks.

Video 3/Component 1 Input

HDMI Set-up Allows the TV to communicate with equipment that is compatible with the control

Switches the component video jack 1 and the video jack 3.

• You cannot use the component video jack 1 and the video jack 3 at the same time.

for HDMI function, and connected to the HDMI sockets/jacks of the TV. Note that communication settings must also be made on the connected equipment.

Control for HDMI Sets whether or not to link the operations of the TV and the

connected equipment that is compatible with control for HDMI. When set to “On,” the following functions are available. If the specific Sony equipment that is compatible with control for HDMI is connected, this setting is applied to the connected equipment automatically when the “Control for HDMI” is set to “On” using the TV.

Auto Devices Off When this is set to “On,” the connected equipment that is

compatible with control for HDMI turns off when you turn off the TV.

Auto TV On When this is set to “On,” the TV turns on when you turn on

the connected equipment that is compatible with control for HDMI.

HDMI Device List Displays a list of connected equipment that is compatible

with control for HDMI.

Using Menu Functions

• You cannot use “Control for HDMI” if the TV operations are linked to the operations of an audio system that is compatible with control for HDMI.

(Continued)

Auto Start-up You can run the initial set-up that appeared when you first connected the TV, and

select the language, or tune in all available channels again. Even if you have made the settings when you first connected the TV, you may need to change the settings after moving house, or to search for newly launched channels.

Logo Illumination Lights up and turns off the Sony logo on the front of the TV.

Language Sets the language displayed on the menu screens.

Product Information Displays product information of the TV.

Factory Settings Resets all settings to factory settings except for the “Programme Block” setting,

“Favourite” setting, and programme preset data. After completing this process, the initial set-up screen is displayed. Completing auto tuning in initial set-up will reset the settings that are not reset by “Factory Settings.” To retain the settings, skip the “Auto Tuning.”

Analogue Set-up

Programme List Display

1 Digit Direct When “1 Digit Direct” is set to “On,” you can select an analogue channel using one

Select “Off” to hide the list of analogue channels from the XMB™ (XrossMediaBar).

preset number button (0 – 9) on the remote.

• When “1 Digit Direct” is set to “On,” you cannot select channel numbers 10 and above by entering two digits on the remote.

Favourite Set-up Allows you to set your favourite channels by assigning the desired channel

Auto Tuning Tunes in all the available analogue channels.

Programme Sorting Changes the order of analogue channels stored in the TV.

Programme Labels Assigns a channel name of your choice, up to five letters or numbers. The name

Programme Block Blocks an individual channel from being watched.

numbers. To reset the favourite channels, select “– – –.”

You can retune the TV after moving house, or to search for newly launched channels.

1 Press F/f to select the channel you want to move to a new position, then press

2 Press F/f to select the new position for the channel, then press .

appears briefly on the screen when you select the channel.

1 Press F/f to select the channel you want to name, then press . 2 Press F/f to select the desired letter or number (“_” for a blank space), then

press g.

If you enter a wrong character

Press G/g to select the wrong character. Then, press F/f to select the correct character.

3 Repeat step 2 until you finish entering the name. 4 Press to exit the labeling procedure.

1 Press F/f to select the channel you want to block, then press . 2 Press F/f to select “Block,” then press .

To watch the channel, select “Allow.”

Intelligent Picture On with Indicator Automatically reduces the picture noise. The signal level bar

is displayed when the channel is changed or the display is changed from an input screen to a TV programme.

On Automatically reduces the picture noise.

Off Turns off the “Intelligent Picture” feature.

Manual Programme Preset

To preset a channel, press PROG +/– to select the programme number, before selecting “Label,” “AFT,” “Audio Filter,” “Skip,” “LNA” or “Colour System.” You cannot select a programme number that is set to “Skip” (page 41).

Programme/ TV System/ Frequency

Presets programme channels manually.

1 Press F/f to select “Programme,” then press . 2 Press F/f to select the programme number you want to

manually tune (if tuning a VCR, select programme 0), then press .

3 Press F/f to select “TV System,” then press . 4 Press F/f to select the best received TV broadcast

systems, then press .

5 Press F/f to select “Frequency,” then press . 6 Press G/g to search for the next available channel. The

frequency band (“VHF Low,” “VHF High” or “UHF”) is changed accordingly.

Label Assigns a name of your choice to the selected channel. This

AFT Allows you to fine-tune the selected channel manually if you

Audio Filter Improves the sound of individual channels when distortion

name appears briefly on the screen when you select the channel. To input characters, follow steps 2 to 4 in “Programme Labels” (page 40).

feel that a slight tuning adjustment may improve picture quality. When “On” is selected, fine tuning adjustments are made automatically.

occurs in mono broadcasts.

• You cannot receive stereo or dual sound when “Low” or “High” is selected.

Skip Skips unused analogue channels when you press PROG +/–

LNA Improves the picture quality of the channel (noisy picture)

Colour System Selects the colour system (“Auto,” “PAL,” “SECAM,”

Signal Level Displays the signal level for programme currently being

to select channels. To select channels you have programmed to skip, use the corresponding number buttons.

when the broadcast signal is very weak.

“NTSC3.58,” “NTSC4.43”) according to the channel.

watched.

Using Menu Functions

Digital Set-up

Subtitle Set-up Subtitle Setting When set to “For Hard Of Hearing,” visual aids for the

Preferred Language

Audio Set-up Audio Type Switches to broadcast for the hearing impaired when you

Preferred Language

Audio Description

Mixing Level Adjusts the TV main audio and Audio Description output

Dynamic Range Compensates for differences in the audio level between

hearing impaired are displayed with the subtitles (when such visual aids are available).

Allows you to select the language of the subtitles.

select “For Hard Of Hearing.”

Sets the language to be used for a programme.

Provides audio description (narration) of visual information, when such information is available.

levels.

different channels (only for Dolby Digital audio).

• The function may have no effect or the effect may vary depending on the programme regardless of the “Dynamic Range” setting.

MPEG Audio Level

Digital Tuning Digital Auto

Tuning

Programme Sorting

Digital Manual Tuning

LNA Improves the picture quality of the channel (noisy picture)

Adjusts the MPEG audio sound level.

Tunes in the available digital channels. You can retune the TV after moving house, or to search for newly launched channels.

Allows you to remove or change the order of digital channels stored in the TV.

1 Press F/f to select the channel you want to remove or

move to a new position.

2 Remove or change the order of the digital channels as

follows:

To remove a digital channel

Press . After a confirmation message appears, press G to select “Yes,” then press .

To change the order of the digital channels

Press g, then press F/f to select the new position for the channel and press G.

3 Press RETURN.

Tunes the digital channels manually.

1 Press the number buttons to enter the channel number

you want to tune, or press F/f.

2 When the available channels are found, press F/f to

select the channel you want to store, then press .

3 Press F/f to select the channel number where you want

to store the new channel, then press .

Repeat the above procedure to tune other channels.

when the broadcast signal is very weak.

Radio Display Displays the screen wallpaper when you listen to a radio broadcast. You can select

the screen wallpaper colour, display a random colour or view a slideshow (page 23,

29). To cancel the screen wallpaper display temporarily, press any button.

Parental Lock Sets an age restriction to viewing. To view any programme rated for ages above the

PIN Code Enter your PIN code to activate “Parental Lock.” You can also change the PIN

Technical Set-up Auto Service

age you specify, enter the correct PIN code.

code.

• PIN code 9999 is always accepted.

Update

System Update Enables the TV to automatically receive free software

System Information

Enables the TV to detect and store new digital services as they become available.

updates through your existing aerial/antenna/cable (when issued). We recommend that you leave the setting to “On” at all times.

Displays the current software version and the signal level.

Network Settings

Network IP Address

Server Display Settings

Server Diagnostics Diagnoses whether the TV can connect to each server on the home network.

Renderer Function Enables playback of photo/music/video files on the TV through other control

Renderer Access Control

Renderer Set-up Automatic

Settings

Test Diagnoses whether the network is correctly connected.

IP Address/ Subnet Mask/ Default Gateway/ Primary DNS/ Secondary DNS

MAC Address Displays the MAC address, which is a fixed, globally unique

Displays the connected server list and allows you to select the server you want to display on the Home Menu.

devices on the network, such as a digital still camera or mobile phone.

Allows you to specify the accessible controller to the TV. When this setting is set to “On,” you can playback photo/music/video files on the TV using the controller.

Access Permission

Renderer Name Allows you to set the name of the TV to be shown on the

Manual

Allows you to set the network settings according to your network environment.

DHCP (DNS manual)

Automatically acquires the network settings except for DNS server settings. You can manually set the DNS settings.

DHCP (DNS automatic)

Automatically acquires the network settings through the Dynamic Host Configuration Protocol server function of the router or Internet service provider.

You need to configure each item when “Manual” is selected in “IP Address Settings.” When “DHCP (DNS manual)” is selected, be sure to enter “Primary DNS” and “Secondary DNS” server addresses manually.

identifier of the network device.

Allows you to select whether to permit access to the TV automatically when a network device accesses the TV for the first time.

controller.

Using Menu Functions

Additional Information

Installing the Accessories (Wall-Mount Bracket)

To Customers:

For product protection and safety reasons, Sony strongly recommends that installing of your TV be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.

To Sony Dealers and Contractors:

Provide full attention to safety during the installation, periodic maintenance and examination of this product.

Your TV can be installed using the SU-WL500/SU-WL50B Wall-Mount Bracket (sold separately).

• Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the installation.

• Refer to “Detaching the Table-Top Stand from the TV” (page 7).

• Refer to “TV installation dimensions table” (page 45).

• Refer to “Screw and Hook locations diagram/table” (page 46).

• Place the TV on the Table-Top Stand, when securing the Mounting Hook.

SU-WL500:

SU-WL50B:

Square hole

Mounting Hook

Screw (+PSW 6 × 16)

Mounting Hook

Screw (+PSW 6 × 16)

Sufficient expertise is required for installing these products, especially to determine the strength of the wall for withstanding the TV’s weight. Be sure to entrust the attachment of these products to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation.

TV installation dimensions table

SU-WL500:

Screen centre point

SU-WL50B:

Screen centre point

Unit: mm

Model Name

KDL-52Z5500

KDL-46Z5500

KDL-40Z5500

Display

dimensions

1,240 767 46 99 445 498 135 136 369 729 476

1,091 672 87 140 436 489 135 136 340 632 467

958 596 126 179 436 489 135 136 314 561 467

Screen

centre

dimension

C DEFGH

SU-

WL500

SU-

WL50B

WL500

Length for each mounting angle

Angle (0°) Angle (20°)

SU-

WL50B

WL500

SU-

WL50B

SU-WL500 only

Figures in the above table may differ slightly depending on the installation.

WARNING

The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV. Refer to “Specifications” (page 47) for its weight.

Additional Information

(Continued)

Screw and Hook locations diagram/table

Model Name

Screw location Hook location

SU-WL500 SU-WL50B SU-WL500 SU-WL50B

KDL-52Z5500/46Z5500/40Z5500 d, g d, i b

SU-WL500:

Screw location

When installing the Mounting Hook on the TV.

Hook location

When installing the TV onto the Base Bracket.

a* b c*

* Hook location “a” and “c” cannot be

used for the models.

SU-WL50B:

Screw location

When installing the Mounting Hook on the TV.

Hook location

When installing the TV onto the Base Bracket.

a* b c*

Mounting Hook

Base Bracket

* Hook location “a” and “c” cannot be

used for the models.

Specifications

Model name

System

Panel system

TV system

Colour/video system

Channel coverage

Sound output

Input/Output jacks

Aerial/Antenna/cable

COMPONENT IN1

/ 3

COMPONENT IN2

COMPONENT IN1, 2

HDMI IN1, 2, 3, 4

DIGITAL AUDIO OUT (OPTICAL)

PC IN

LAN

Power and others

Power requirements

Screen size (measured diagonally)

Display resolution

Power consumption

Dimensions

with Table-Top Stand (Approx.) (w × h × d)

without Table-Top Stand

KDL-40Z5500 KDL-46Z5500 KDL-52Z5500

LCD (Liquid Crystal Display) Panel

Analogue: B/G, I, D/K, M Digital: DTMB

Analogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video

input)

Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4

Analogue:B/G: VHF: E2–E12/UHF: E21–E69/CATV: S01–S03, S1–S41

I: UHF: B21–B69/CATV: S01–S03, S1–S41 D/K: VHF: C1–C12, R1–R12/UHF: C13–C57, R21–R60/CATV: S01–S03, S1–S41 M: VHF: A2–A13/UHF: A14–A79/CATV: A8–A2, A–W+4, W+6–W+84

Digital: UHF

10 W + 10 W

75 ohm external terminal for VHF/UHF

S video input (4-pin mini DIN)

Video input (phono jack)/Monitor out

Audio input (phono jacks)/Monitor out

Video input (phono jack)

Audio input (phono jacks)

COMPONENT IN1 Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i Y: 1 Vp-p, 75 ohms, 0.3V negative sync/P P

R/CR: 0.7 Vp-p, 75 ohms

3 Video input (phono jack)

Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i Y: 1 Vp-p, 75 ohms, 0.3V negative sync/P P

R/CR: 0.7 Vp-p, 75 ohms

Audio input (phono jacks)

Video: 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital

Analogue audio input (minijack) (HDMI IN1 only)

PC Input (see page 48)

Digital optical jack (Two channel linear PCM, Dolby Digital)

Audio output (phono jacks)

PC Input (D-sub 15-pin) (see page 48) G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/ R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p

PC audio input (minijack)

USB port

Headphones jack

10BASE-T/100BASE-TX connector (Depending on the operating environment of the network, connection speed may differ. 10BASE-T/100BASE-TX communication rate and communication quality are not guaranteed for this TV.)

220 V – 240 V AC, 50 Hz

40 inches (Approx.

101.6 cm)

1,920 dots (horizontal) × 1,080 lines (vertical)

Indicated on the rear of the TV

958 mm × 649 mm × 303 mm

958 mm × 596 mm × 86 mm

46 inches (Approx.

116.8 cm)

1,091 mm × 725 mm × 330 mm

1,091 mm × 672 mm × 86 mm

B/CB: 0.7 Vp-p, 75 ohms/

52 inches (Approx.

132.2 cm)

1,240 mm × 821 mm × 358 mm

1,240 mm × 767 mm × 86 mm

Additional Information

(Continued)

Model name

Mass (Approx.) with Table-Top Stand

without Table-Top Stand

Supplied accessories

Optional accessories

Wall-Mount Bracket

KDL-40Z5500 KDL-46Z5500 KDL-52Z5500

20.8 kg 25.3 kg 31.3 kg

17.9 kg 21.9 kg 27.2 kg

See “To check the accessories” (page 4).

SU-WL500/WL50B

Design and specifications are subject to change without notice.

PC input signal reference chart for PC IN and HDMI IN 1, 2, 3, 4

Resolution

Signals

VGA

SVGA

XGA

WXGA

SXGA

HDTV

Horizontal (Pixel)

640 × 480 31.5 60 VESA

640 × 480 37.5 75 VESA

720 × 400 31.5 70 VESA

800 × 600 37.9 60 VESA

800 × 600 46.9 75 VESA

1024 × 768 48.4 60 VESA

1024 × 768 56.5 70 VESA

1024 × 768 60.0 75 VESA

1280 × 720 45.0 60 EIA

1280 × 768 47.4 60 VESA

1280 × 768 47.8 60 VESA

1280 × 960 60.0 60 VESA

1360 × 768 47.7 60 VESA

1280 × 1024 64.0 60 VESA

1920 × 1080 66.6 60 VESA*

1920 × 1080 67.5 60 EIA*

Vertical (Line)

Horizontal frequency (kHz)

Vertical frequency (Hz)

Standard

* 1080p timing when applied to the HDMI input will be treated as a video timing and not a PC timing. This

affects the “Video Settings” menu and “Screen” menu settings. To view PC contents, set “Wide Mode” to “Full” and “Display Area” to “Full Pixel.”

• This TV’s PC input does not support Sync on Green or Composite Sync.

• This TV’s PC input does not support interlaced signals.

• For the best picture quality, it is recommended to use the signals in the above chart with a 60 Hz vertical frequency (boldfaced).

Troubleshooting

Check whether the 1 (standby) indicator is flashing in red.

When the 1 (standby) indicator is flashing

The self-diagnosis function is activated.

1 Count how many times the 1 (standby) indicator flashes between each two second break.

For example, the indicator may flash three times, go off for two seconds, then flash again three times.

2 Press 1 on the TV to turn it off, disconnect the mains lead/AC power cord, and inform your

dealer or Sony service centre of how the indicator flashes (number of flashes).

When the 1 (standby) indicator is not flashing

1 Check the items in the tables below. 2 If the problem persists, have your TV serviced by qualified service personnel.

Condition Explanation/Solution

Picture

There is no picture (screen is dark) and no sound.

No picture or menu information from equipment connected to the video input jack appears on the screen.

Ghosting occurs, or double images appear.

Only snow and noise appear on the screen.

The picture is distorted (dotted lines or stripes appear).

There is picture or sound noise when viewing a TV channel.

Tiny black points and/or bright points appear on the screen.

The picture contours are distorted.

The picture is not displayed in colour.

• Check the aerial/antenna/cable connection.

• Connect the TV to the mains/AC power, and press 1 on the TV.

• If the 1 (standby) indicator lights up in red, press TV "/1.

• Press to display the list of inputs, then select the desired input.

• Check the connection between the optional equipment and the TV.

• Check the aerial/antenna/cable connection.

• Check the aerial/antenna location and direction.

• Check if the aerial/antenna is broken or bent.

• Check if the aerial/antenna has reached the end of its serviceable life (three to five years for normal use, one to two years when used at the seaside).

• Keep the TV away from electrical noise sources such as cars, motorcycles, hair-dryers, or optional equipment.

• When installing optional equipment, leave some space between the optional equipment and the TV.

• Check the aerial/antenna/cable connection.

• Keep the aerial/antenna/cable TV cable away from other connecting cables.

• Adjust “AFT” (Automatic Fine Tuning) to obtain better picture reception (page 41).

• The screen is composed of pixels. Tiny black points and/or bright points (pixels) on the screen do not indicate a malfunction.

• Select “Standard” or “Off” in “Motionflow” (page 34). If the symptom still persists, change the current setting of “Cinema Drive” to other settings (page 34).

• Select “Reset” (page 33).

Additional Information

(Continued)

Condition Explanation/Solution

The picture from equipment connected to the 1 or 2 sockets/jacks is not displayed in colour, or is displayed in irregular colours.

No picture from the connected equipment appears on the screen.

You cannot select the connected equipment on the Home Menu or you cannot switch the input.

• Check the connection of the 1 or 2 sockets/jacks and check if the sockets/jacks are firmly seated in their respective sockets/jacks.

• Turn the connected equipment on.

• Check the cable connection.

• Press to display the list of inputs, then select the desired input.

• Correctly insert the memory card or other storage device in the digital still camera.

• Use a digital still camera memory card or other storage device that has been formatted according to the instruction manual supplied with the digital still camera.

• Operations are not guaranteed for all USB devices. Also, operations differ depending on the features of the USB device and the video being played.

• Check the cable connection.

• Set the server to be displayed on the Home Menu (page 30).

Sound

The picture is good, but there is no sound.

• Press 2 +/– or % (Mute).

• Check if the “Speaker” is set to “TV Speaker” (page 38).

• When using HDMI input with Super Audio CD or DVD-Audio, DIGITAL AUDIO OUT (OPTICAL) may not output audio signals.

Channels

You cannot select your desired channel.

Some channels are blank. • The channel is for scrambled/subscription service only. Subscribe to a

You cannot view digital channels.

• Switch between digital and analogue mode, and select the desired digital/analogue channel.

pay TV service.

• The channel is used only for data (no picture or sound).

• Contact the broadcaster for transmission details.

• Contact a local installer to find out if digital transmissions are provided in your area.

• Upgrade to a higher gain aerial/antenna.

Network

Connection diagnostic results indicate a failure.

Check Connections

• Use a straight cable for the LAN cable.

• Check if the cable is connected firmly.

• Check the connection between the TV and the router.

Check Settings

• Change the IP address for the DNS server (see “Checking the Network Connection” on page 29) while referring to the following: –Contact your Internet service provider. –Specify the IP address of the router if you do not know the DNS of

your Internet service provider.

• Confirm the proxy server settings (page 29).

Condition Explanation/Solution

The server cannot be found, a list cannot be retrieved, and playback fails.

• Once server settings are changed, turn the TV off and on by pressing 1

on the TV.

• Execute “Server Diagnostics” (page 30).

When using a PC as the server

• Check if the PC is turned on. Do not turn off the PC while accessing.

• If security software is installed on the PC, be sure to allow connections from external devices. For details, refer to the manual supplied with your security software.

• The load on the PC may be too high or the server application may become unstable. Try the following: –Stop the server application and restart it. –Restart the PC. –Reduce the number of applications running on the PC. –Reduce the amount of content.

Changes on the server are not being applied or displayed content differs from content on the server.

Photo, music and/or video files do not appear or icons are not displayed.

• Sometimes changes are not applied to displays on the TV even though content has been added and/or deleted on the server. If this happens, go back up one level and try opening the folder or server again.

Preliminary Check

• Check that the connected device supports DLNA.

• Operations are not guaranteed for all servers. Also, operations differ depending on the features of the server and the content in question.

• Turn the connected device on.

Check Connections

• Check that the LAN cable and/or mains lead/AC power cord of the server has not become disconnected.

Check Settings

• Check that the connected device is registered under “Server Display Settings” (page 30).

• Check that the server is correctly configured.

• Check that the selected device is connected to the network and can be accessed.

• If the “IP Address Settings” in “Network” under “Network Settings” is set to “DHCP (DNS automatic)” or “DHCP (DNS manual),” it may take some time to recognise devices if there is no DHCP server. Execute “Server Diagnostics” (page 30).

The TV cannot be found from renderer-compatible device (the controller).

Check Connections

• Check that the LAN cable and/or mains lead/AC power cord of the server has not become disconnected.

Check Settings

• Check if the “Renderer Function” is activated (page 43).

• Check that the connected device is registered under “Renderer Access Control” (page 43).

General

The TV’s power cannot be turned on.

The TV turns off automatically (the TV enters standby mode).

The TV turns on automatically.

Some input sources cannot be selected.

The remote does not function. • Replace the batteries.

• Check if ENERGY SAVING SWITCH is on (page 10).

• Check if the “Sleep Timer” is activated, or confirm the “Duration” setting of “On Timer” (page 32).

• Check if the “Idle TV Standby” is activated (page 32).

• Check if the “On Timer” is activated (page 32).

• Select “Video Labels” and cancel the “Skip” setting for the input source (page 39).

Additional Information

(Continued)

Condition Explanation/Solution

HDMI equipment does not

• Check that your equipment is compatible with control for HDMI.

appear on “HDMI Device List.”

You cannot select “Off” in “Control for HDMI.”

• If you have connected any audio system that is compatible with control for HDMI, you cannot select “Off” in this menu. If you want to change the audio output to the TV speaker, select “TV Speaker” in the “Speaker” menu (page 38).

Index

Numerics

1 Digit Direct 40 4:3 Default 36

A-G

Add to Slideshow 23, 29 Adv. Contrast Enhancer 34 Advanced Settings 34 AFT 41 Analogue Set-up 40 Audio Filter 41 Audio Out 38 Audio Settings 38 Audio Set-up 42 Auto Adjustment 37 Auto Clock Update 32 Auto Light Limiter 34 Auto S Video 39 Auto Start-up 40 Auto Tuning

analogue channels only 40

digital channels only 42 Auto Wide 36 Backlight 33 Balance 35 Bass 35 Batteries, inserting into the remote 4 Black Corrector 34 BRAVIA Sync 25 BRAVIA Tips 32 Brightness 33 Category list 17 Channels

selecting 15

Skip 41 Cinema Drive 34 Clear White 34 Clock Set 32 Clock/Timers 32 Colour 33 Colour System 37 Colour Temperature 33 Connecting

an aerial/antenna/cable 5

network 28

optional equipment 19

VCR 5 Control for HDMI 25, 39 Digital Set-up 42 Digital Tuning 42 Display a photograph with the location on the map 24 Display Area 36 Display map 24 Dual Sound 36 Duration 24 Eco 32 ENERGY SAVING SWITCH 10 EPG (Digital Electronic Programme Guide) 17 Factory Settings 40

Fastext 16 Favourite list 18 Favourite Set-up 40 Full 16 Gamma 34

H-Q

HDMI Set-up 39 Headphones

connecting 21

Headphone Settings 38 Horizontal Shift 36, 37 Hue 33 Idle TV Standby 32 Initial set-up 6 Installing the accessories 44 Intelligent Picture 41 Intelligent Volume 35 Label 41 Language 40 Light Sensor 14, 32 Live Colour 34 LNA 41, 42 Logo Illumination 40 Manual Programme Preset 41 Motionflow 34 MPEG Noise Reduction 34 Music 23, 28 Music Selection 23, 29 Network 43

connecting 28 Network connection 29 Network Settings 43 Noise Reduction 33 Normal 16 On Timer 32 Operating optional equipment 26 Optical Out 38 Parental Lock 43 PC Power Management 32 Phase 37 Photo 23, 28

GPS 24 Photo Colour Space 37 Picture 33 Picture Frame 23 Picture Mode 33 Picture Off ( ) indicator 14 PIN Code 43 PIP 22 Pitch 37 Power (") indicator 14 Power (1) button 10 Power Saving 32 Product Information 40 Programme Labels 40 Programme List Display 40 Programme Sorting 40 Quick Start 38

R-Z

Radio Display 43 Reminder 17 Remote control 10

inserting batteries 4

sensor 14 Renderer 29 Renderer Access Control 43 Renderer Function 43 Renderer Set-up 43 Reset

Eco 32

PC settings 37

picture 33

sound 35 SCENE 12 Screen

for inputs other than a PC 36

for PC input 37 Server Diagnostics 43 Server Display Settings 30, 43 Set-up 38 Sharpness 33 Skip 41 Sleep Timer 32 Sound 35 Sound Booster 35 Sound Enhancer 35 Sound Mode 35 Speaker 38 Specifications 47 Standby (1) indicator 14 Subtitle Set-up 42 Surround 35 System Update 32 Target Inputs

picture 33

screen 36

sound 35 Technical Set-up 43 Text 16 Timer ( ) indicator 14 Timer list 17 Treble 35 Troubleshooting 49 TV buttons/indicators 10 Twin Picture 22 USB Auto Start 38 Vertical Shift 36, 37 Vertical Size 36 Video 23, 28 Video Labels 39 Video Settings 37 Voice Zoom 35 Volume Offset 35 Wide Mode 16, 36, 37 Wide Zoom 16 x.v.Colour 37 XMB™ (XrossMediaBar) 31 Zoom 16

簡介

感謝您購買這項 Sony 產品。使用電視機之前，請詳閱本手冊，並保留下來以便將來參考。

商標資訊

HDMI、HDMI 標誌以及 High-Definition Multimedia Interface 是 HDMI Licensing LLC 的商標或註冊商標。

DLNA 和 DLNA CERTIFIED 是 Digital Living Network Alliance 的商標和 / 或服務標誌。

由 Dolby Laboratories 授權製造。杜比、Dolby 與雙 D 標誌是 Dolby

Laboratories 的商標。

“BRAVIA”和是 Sony

Corporation 的商標。

“XMB”和“xross media bar”是 Sony

Corporation 和 Sony Computer Entertainment Inc. 的商標。

The typefaces used on the screen display are solely developed by DynaComware.

本電視設計在香港使用，只保證能在香港使用。

開始 4

安全資訊 .............................................................................. 8

預先注意事項 .......................................................................... 9

遙控器與電視的控制器 / 指示燈 ......................................................... 10

觀賞電視

觀賞電視 ............................................................................. 15

使用電視節目指南（EPG）（僅限於數位頻道） ............................................ 17

使用我的最愛清單 .................................................................... 18

使用選用的設備

連接選用的設備 ...................................................................... 19

觀看來自連接的設備的影像 ............................................................. 21

經由 USB 播放相片 / 音樂 / 視訊 ......................................................... 22

以 HDMI 控制使用 BRAVIA Sync........................................................... 24

用電視遙控器操作選用的設備 ........................................................... 25

使用家庭網路功能

連線到網路 ........................................................................... 27

經由網路享受相片 / 音樂 / 視訊檔案 ..................................................... 27

檢查網路的連線情形 ................................................................... 28

調整服務器顯示設定 ................................................................... 29

使用選單功能

在 XMB™ 上導覽電視主選單 ............................................................ 30

電視設定選單 ......................................................................... 31

其他資訊

安裝附件（壁掛式支架）............................................................... 43

規格 ................................................................................. 46

解決問題 ............................................................................. 48

索引 ................................................................................. 51

操作電視之前，請閱讀 “安全資訊”（8 頁）。請保留本說明書以便將來參考。

開始

使用之前

檢查配件

交流電源線（1）訊號線固定器（1）底座（1）和螺絲（4）（僅限 KDL-46Z5500/

40Z5500）遙控器 RM-GD008 （1） AA 電池（R6 型）（2）

將電池插入遙控器中

將蓋子推拉來打開。

1：安裝底座（適用於 KDL46Z5500/40Z5500）

1 打開紙箱，取出底座和螺絲。 2 將電視放在底座上。

3 用所附的螺絲按照箭頭標記所指引

的螺絲孔將電視機固定在底座上。

• 如果使用電動螺絲刀，請將鎖緊扭矩設定為

1.5 N·m （15 kgf·cm）左右。

2：連接天線 / 有線電視 / 錄影機

連接天線 / 有線電視

天線訊號線

（非附件）

天線訊號線

（非附件）

連接天線 / 有線電視和錄影機

3：防止電視機傾倒

開始

AV 訊號線

（非附件）

錄影機

天線訊號線

（非附件）

S視訊訊號線

（非附件）

天線訊號線

（非附件）

1 在電視機底座安裝一根木頭螺絲（直

徑 4 毫米，非附件）。

2 將一根金屬螺絲（M4 × 20，非附件）

鎖入電視機的螺絲孔。

3 用堅韌的繩索（非附件）將木螺絲和

金屬螺絲綁在一起。

• 可以用選購的 Sony 支撐帶固定電視。若要購買固定帶，請接洽最近的 Sony 服務中心。請備妥您的電視型號名稱以便參考。

4: 綑綁訊號線

您也可以將訊號線固定器安裝在這兒。 ( 安裝之後將無法移除。)

• 不要將 AC 電源線與其他訊號線綁在一起。

5: 執行初始設定

按照螢幕上的指示進行。

節目排序 : 如果要更改類比頻道的順序，請按照 “節目排序”（39 頁）中的步驟進行。

節能預設 : 當您選擇 “是”時，“節能”設定值會改變為建議值，以降低耗電量。

• 您也可以手動調諧頻道（41 頁）。

調整電視機的觀賞角度

本電視機可以在下面顯示的角度內調整。

向左和向右調整角度（旋轉）

頂視圖

正面

將桌面底座從電視上拆下來

• 卸除電視機上的箭頭標記所指引的螺絲。

• 除了下列原因之外，不要將桌面底座拆掉。

- 要將電視安裝在牆上。

- 購買時要將電視放進紙箱中（僅限 KDL-

46Z5500/40Z5500）。

開始

安全資訊

安裝 / 設定

為了避免火災、觸電或損壞及 / 或受傷等危險，請遵照下列指示來安裝和使用電視機。

安裝

• 應將電視機安裝在易於插拔的 AC 電源插座附近。

• 將電視機擺在平穩的水平表面上，以防止傾倒而造成人員的傷害或者損及電視機。

• 僅可由合格的維修人員執行掛壁安裝。

• 為了安全起見，強烈建議您使用 Sony 配件，包括：

KDL-52Z5500/46Z5500/40Z5500:

- 壁掛式支架 SU-WL500/WL50B

• 將掛勾安裝於電視機上時，務必要使用隨附於壁掛式支架的螺絲。隨附螺絲的設計從掛勾安裝表面量起的長度是 8 mm 至 12 mm。螺絲的直徑和長度會因為壁掛式支架的型號而有所不同。使用隨附螺絲以外的螺絲可能會造成電視機內部損壞或者掉落等等。

8 mm - 12 mm

螺絲（隨附於壁掛式支架）

掛勾電視背後的掛勾附件

搬動

• 搬動電視機之前，請斷開所有訊號線的連接。

• 大尺寸電視機需要兩到三人搬動。

• 用手搬動電視機時，請如右圖所示抓握。請勿對液晶面板以及螢幕周圍的框邊施加壓力。

• 擡起或移動電視機時，請從底部牢牢抓握住。

• 搬動電視機時，請勿使其受到搖晃或過度震動。

• 搬動電視機以進行維修或移動時，請使用原有的紙箱和包裝材料進行包裝。

通風

• 切勿遮擋通風孔或將任何物體插入機殼內。

• 如下圖所示，在電視機周圍保留通風空間。

• 強烈建議您使用 Sony 掛壁式支架以確保足夠的空氣流通。

安裝在牆壁上

30 cm

10 cm 10 cm

在電視機周圍至少留出所示的空間。

10 cm

安裝在底座上

30 cm

10 cm

在電視機周圍至少留出所示的空間。

• 為了確保正確通風及防止髒物或灰塵堆積：

- 請勿將電視機平放、上面朝下安裝、向後安裝或側面安裝。

- 請勿將電視機放置於架子、地毯、床或壁橱中。

- 請勿用布（如窗簾）或物件

（如報紙等）覆蓋電視機。

- 請勿如下圖所示安裝電視機。

空氣流通被阻擋。

牆壁牆壁

6 cm

AC 電源線

為了避免火災、觸電或損壞及 / 或受傷等危險，請遵照下列指示來處理 AC 電源線和插座 :

- 請僅使用 Sony 隨附的 AC 電源線，不要使用其它品牌的電源線。

- 將插頭完全插入 AC 電源插座。

- 僅可在 220-240 V AC 電源上使用電視機。

- 連接訊號線時，為了安全起見請務必拔下 AC 電源線，以免被訊號線絆到腳。

- 在進行作業或移動電視機之前，請從 AC 電源插座上斷開 AC 電源線的連接。

- 保持 AC 電源線遠離熱源。

- 拔下 AC 電源插頭，定期進行清潔。如果插頭上有積灰並帶有濕氣，則其絕緣品質可能已經劣化，並可能會造成火災。

註

• 請勿在任何其它設備上使用所隨附的 AC 電源線。

• 請勿過度擰捏、彎曲或扭轉 AC 電源線。否則線芯可能會曝露在外或折斷。

• 請勿改裝 AC 電源線。

• 請勿將任何重物放在 AC 電源線。

• 斷開 AC 電源線連接時，請勿拉扯 AC 電

源線。

• 請勿在相同的 AC 電源插座上連接太多設備。

• 請勿使用不適當的 AC 電源插座。

使用限制

請勿在下列地點、環境或情況條件下安裝 / 使用電視機，否則電視機可能會發生故障並造成火災、觸電、損壞及 / 或受傷等危險。

地點：

室外（在直射的陽光中），海邊，船上或其他船艦上，車內，醫療機構中，不穩定的場所，靠近水、雨、濕氣或煙霧的地方。

環境：

炎熱、潮濕或太多灰塵的地方；昆蟲可能進入的地方；可能受到機械式震動的地方；靠近易燃物體（蠟燭等）的地方。不應該讓液體滴濕或噴濕電視，而且裝滿液體的物體（例如花瓶）不應該擺在電視上。

情況條件：

手濕，機殼拆除或採用非製造商所建議的配件時切勿使用本電視機。出現雷電時請將電視機電源線從 AC 電源插座和天線拔下。

打破電視機螢幕：

• 請勿將任何物品丟向電視機。否則螢幕可能會因為受到撞擊而破裂並造成嚴重傷害。

• 如果電視機的表層破裂，在拔下AC電源線以前請勿觸摸它。否則可能導致觸電。

不使用時

• 如果您不使用電視機數天，為了環保和安全原因，應將電視機電源線從 AC 電源插座上拔下。

• 關閉電視機電源時，電視機並未與 AC 電源斷開連接，請將插頭從 AC 電源插座上拔下以完全斷開電視機的電源連接。

• 但是，某些電視機可能具有需要將電視機保持在待命模式下才能正常工作的特點。

對於兒童

• 請勿讓兒童爬上電視機。

• 將體積小的配件放在兒童拿不到的地

方，以便不會被兒童誤吞。

如果出現下列問題…

如果出現以下任何問題，請立刻關閉電視機並拔下 AC 電源線。

請咨詢您的經銷商或 Sony 服務中心以交由合格的服務人員進行檢查。

當：

- AC 電源線損壞。

- AC 電源插座不適當。

- 電視機由於跌落、敲擊或撞擊而損壞。

- 任何液體或固體物件通過開口處掉入機殼內。

預先注意事項

觀賞電視

• 請在適當光線條件下觀賞電視，因為在光線不足條件下或長時間觀賞電視會損傷您的眼睛。

• 使用耳機時，請調整音量以免音量過高損傷聽力。

LCD 螢幕

• 雖然 LCD 螢幕採用最精密技術製造且

99.99% 以上的像素有效，但還是可能會出現黑點或 LCD 螢幕上可能會經常出現亮點（紅、藍或綠色）。這是 LCD 螢幕的結構特性，並不是故障。

• 請勿按壓或刮傷前濾光面板或在電視機頂部放置物件。畫面可能會不均，或者 LCD 螢幕可能會損壞。

• 如果在寒冷地點使用本電視機，畫面上可能會出現模糊或變暗。這並不是故障。溫度上升後這些現象就會消失。

• 畫面靜止不動將會產生重影。片刻後該現象將消失。

• 電視機使用過程中，螢幕和機殼會變熱。這不是故障。

• LCD 螢幕包含少量液晶。視螢光管種類而定，有時候會含有水銀。請按照您當地的法規進行廢棄物處理。

使用和清潔電視機的螢幕表層 /機殼

清潔前，務必將電視機的 AC 電源線從 AC 電源插座上斷開連接。

為了避免物質或螢幕塗層剝離，請遵照下列預先注意事項。

• 若要擦去螢幕表層 / 機殼上的灰塵，請用軟布輕輕擦拭。如果灰塵較難除去，請用稍稍蘸有稀釋中性清潔溶劑的軟布進行擦拭。

• 切勿使用任何類型的磨砂墊、鹼性 / 酸性清潔劑、擦洗粉或揮發溶劑，如酒精、汽油、稀釋劑或殺蟲劑。使用上述材料或與橡膠或乙烯材料長時間接觸可能會造成螢幕表層和機殼材料的損壞。

• 建議您定期使用真空吸塵清理通風口以確保通風順暢。

• 當調整電視機的角度時，請慢慢地調動以防電視機從其桌面型底座移動或滑落。

選購設備

將產生電磁輻射的選購元件或任何其他設備遠離電視機。否則可能會造成畫面失真及 / 或噪聲。

電池

• 安裝電池時請注意正確的極性位置。

• 請勿同時使用不同類型的電池或混合

使用新舊電池。

• 請以符合環境保護規定的方式來丟棄電池。特定地區可能有制訂廢棄電池的相關規定。請向您當地的主管機關查詢。

• 請小心拿取遙控器。請勿讓遙控器掉落或踩在遙控器上，或是讓任何液體濺到遙控器。

• 請勿將遙控器放置在接近熱源的地方，放置在受日光直射地方或潮濕的房間。

遙控器與電視的控制器 / 指示燈

遙控器與電視的控制器

電視上的按鈕功能和遙控器上的一樣。

* 在電視選單中，這些按鈕的用途是 F/f/G/g/。

• 遙控器上的數字 5、N、PROG + 和 AUDIO 按鈕有觸摸點。請

利用觸覺點作為操作電視時的參考。

按鈕/開關說明

TV "/1 （電視待機）

1 （電源）按下以開啟或關閉電視。

按下以便從待機模式開啟和關閉電視。

• ENERGY SAVING SWITCH 關閉時，電視無法開啟。

• 若要中斷電視的連接，請關閉電視，然後將交流電源線的插頭從交流電源拔掉。

ENERGY SAVING SWITCH

按下以開啟或關閉電視。 ENERGY SAVING SWITCH 關閉時，耗電量會降低。

關閉 ENERGY SAVING SWITCH 時，如果電視處於待機模式，開啟 ENERGY SAVING SWITCH 只能讓電視回到待機模式。

• ENERGY SAVING SWITCH 關閉時，您將無法執行時鐘設定、下載 EPG 或更新軟體之類的功能。

F/f/G/g/ 按 F/f/G/g 以移動螢幕上的游標。按以

HOME 按下以顯示電視主選單（30 頁）。

RETURN 按下以便回到顯示選單的上一個畫面。

PROG +/–//在電視模式中：按下以選擇下一個（+）或

2 +/– （音量）按下以調整音量。

% （靜音）按下以靜音。再按一下以還原聲音。

qs qd

/ （輸入選擇 / 文字保留）

OPTIONS 按下以顯示包含 “裝置控制”的清單、或

/ （純文字）按下以顯示文字資訊（16 頁）。

/ （資訊 /

文字顯示）

選擇 / 確認標示的選項。播放相片檔案時：按 F/G 以選擇前一個檔案。按 f/g 以選擇下一個檔案。播放音樂 / 視訊檔案時：按以暫停 / 開始播放。按住 G/g 以便快速前進 / 快速倒轉，然後在要恢復播放的點上放開按鈕。按 F 從目前檔案的開頭處開始播放。按 f 以前往下一個檔案。

播放相片 / 音樂 / 視訊檔案時：按下以停止播放。（顯示會恢復為檔案或資料夾清單。）

上一個（-）頻道。在純文字模式中：按下以選擇下一頁

（）或上一頁（）。

• 在待機模式中，如果想要開啟電視而不要有聲音，請按此按鈕。

在電視模式中：按下以顯示輸入的清單。在純文字模式中：按下以保留目前的頁面。

者通往某些設定選單的捷徑。請用 “裝置控制”選單操作與 HDMI 控制相容的設備。列出的選項會因輸入來源而異。

您每按一下按鈕，顯示就會按下列方式變更：在數位模式中：目前節目的詳細資料下一個節目的詳細資料在類比模式中：目前頻道號碼與寬螢幕模

t 時鐘資訊

式在純文字模式中（16 頁）：顯示隱藏的資訊（例如，競猜問題的答案）。

（待續）

GUIDE/

（EPG）

（最愛頻道）按下以顯示您已經指定的最愛頻道清單

彩色按鈕有彩色按鈕可用時，螢幕上會出現操作指

數字按鈕在電視模式中：按下以選擇頻道。如果是

（寬螢幕模式）按下以改變寬螢幕模式（16 頁）。

（字幕設定）按下以改變字幕語言（41 頁）（僅限數位

SCENE 按下以顯示 “場景選擇”選單。

按下以顯示數位電視節目指南（EPG）

（17 頁）。

（18 頁）。

南。

10 以上的頻道號碼，請快速按下下一個數字。在純文字模式中：按下以輸入頁碼。

模式）。

當您選擇要使用的場景選項時，會自動為選定的場景設定最佳音質與最佳畫質。按 F/f/G/g 選擇一個場景選項，然後按

。

電影院 : 以動態聲音提供劇院環境一般的影像場景。相片 : 提供真實再現列印相片的質地與色彩的影像場景。體育 : 提供讓您體驗有如運動場中的真實影像和聲音的影像場景。音樂 : 提供讓您體驗有如音樂會場中的動態清晰聲音的音響效果。遊戲 : 提供以絕佳影像和音質讓您享受極致遊戲經驗的影像場景。圖像 : 提供讓您舒適地長時間觀賞監視器的影像場景，經由顯示更清晰的細緻影像減低疲勞。通用 : 不為任何場景將音質和畫質最佳化時使用這個設定。自動 : 根據輸入來源自動設定最佳音質和畫質，不過可能沒有任何效果，要視連接的裝置而定。

• 將劇院模式（13 頁）設定為開啟時，“場景選擇”設定會自動切換為 “電影院”。

• 您可以調整的選項會因情況而異。

• 不可用的選項會變成灰色或者不顯示出

來。

AUDIO 在類比模式中：按下以改變雙聲道模式

ANALOG 按下以顯示上次觀賞的類比頻道。

DIGITAL 按下以顯示上次觀賞的數位頻道。

（雙重畫面

/ 子母畫面）

（上一個頻道）按下以回到看過的上一個頻道（五秒鐘以

THEATRE 您可以將劇院模式設定為開啟或關閉。劇

SYNC MENU 顯示連接的 HDMI 設備的選單。觀賞其他輸

用來使用選用設備的按鈕

（照明）按下以照亮遙控器上的按鈕，讓您即使在

（35 頁）。

在數位模式中：按下以改變目前觀看的節目要使用的語言（41 頁）。

觀看來自連接的設備的影像時：按一下以回到正常的電視模式。

同時顯示兩個畫面（21 頁）。

上）。

院模式設定為開啟時，會自動為基於影片的內容設定最佳音質（如果電視用 HDMI 訊號線與音響系統連接）和畫質。

• 如果將電視關閉，劇院模式也會被關閉。

• 當您變更 “場景選擇”設定時，劇院模

式會自動關閉。

•“HDMI 控制”（BRAVIA Sync）只能用於有 BRAVIA Sync 或 BRAVIA Theatre Sync 標誌或者與 HDMI 控制相容的 Sony 外接設備。

入畫面或電視節目時，“HDMI 裝置選項” 會在按下按鈕時顯示出來。

•“HDMI 控制”（BRAVIA Sync）只能用於有 BRAVIA Sync 標誌或者與 HDMI 控制相容的 Sony 外接設備。

您可以操作連接到電視的設備（24、25 頁）。

黑暗的房間裡也可以輕鬆地看清楚按鈕。

（待續）

指示燈

指示燈說明

（關閉畫面 /

定時器）

1 （待機）電視處於待機模式時點亮紅色。

" （電源）電視開啟時點亮綠色。

光感應器（31 頁）請不要將任何東西放在感應器上，那樣做可能會影響其功能。

遙控感應器接收來自遙控器的訊號。

在您選擇 “關閉畫面”（31 頁）時點亮綠色。在您設定定時器（17、31 頁）時點亮橙色。

請不要將任何東西放在感應器上。感應器可能會無法正常運作。

關於電視螢幕上的操作指南

操作指南範例：按或 RETURN （請參閱第 11 頁上的 4 或者第11頁上的6）。

操作指南提供有關如何以遙控器操作電視的說明，會顯示在螢幕底部。使用顯示於操作指南上的遙控器按鈕。

觀賞電視

3 按數字按鈕或 PROG +/– 以選擇電視頻

道。若要用電視節目指南（EPG）選擇數位

電視節目，請參閱 17 頁。在數位模式中，資訊顯示短暫出現。您每按一下，資訊顯示就會循環變更如下：目前的節目資訊 t 下一個節目資訊 t 沒有資訊顯示資訊顯示上可能會有下列圖示。

:廣播服務 : 鎖碼 / 付費收視服務

: 有字幕可以使用

: 有字幕可供聽障者使用

: 有多種語言可以使用

c:提醒

: 目前節目建議的最小年齡（4 到

18 歲）

:親子鎖碼

觀賞電視

1 按電視機上的 1 以打開電視。

電視無法開啟時，將 ENERGY SAVING SWITCH 打開，然後按電視

上的 1 （10 頁）。電視處於待機模式時（電視前面板上的 1 （待機）指示燈是紅色的），按遙控器上的 TV "/1 開啟電視。

2 按 DIGITAL 切換到數位模式，或者按

ANALOG 切換到類比模式。

可用頻道會因為模式而異。

（待續）

若要使用純文字

按 /。您每按一下 /，就會循環顯示如下：文字與電視畫面 t 純文字 t 無純文字

（退出純文字服務）

若要選擇頁面，按數字按鈕或 / 。若要保留頁面，按。若要顯示隱藏資訊，按。

• 您也可以選擇顯示於螢幕上的頁碼，以便直接跳到那一頁上去。按和 F/f/G/g 選擇頁碼，然後按。

• 四個彩色的項目出現在文字頁面底部時，可以快速而且輕鬆地存取頁面（Fastext）。請按相關的彩色按鈕以便使用頁面。

若要以手動方式改變寬螢幕模式

反複按以選擇您要的寬螢幕模式。

寬變焦模式 *

將影像的中間部分放大。影像的左右側緣會被伸展以填滿 16:9 的畫面。

4:3 顯示模式

以原始尺寸顯示 4:3 的影像。16:9 的畫面會被邊條填滿。

16:9 顯示模式

將 4:3 的影像水平伸展，以填滿 16:9 的畫面。

變焦模式 *

以正確的比例顯示寬螢幕電影（完整畫面格式）的影像。

* 影像的上下部分可能會被切掉。您可以調整影像的

垂直位置。按 F/f 將影像往上或往下移動（例如，以便閱讀字幕）。

• 當您選擇 “寬變焦模式”時，影像頂端或底部的某些字元和 / 或文字可能無法看到。遇到這種情況時，請在 “螢幕設定”選單中調整

“垂直高度”（35 頁）。

•“自動寬螢幕模式”（35 頁）設定為 “開” 時，電視會根據外接設備的輸入自動選擇最佳模式。

• 如果 720p、1080i 或 1080p訊源影像顯示時螢幕邊緣有黑邊，請選擇 “寬變焦模式”或 “變焦模式”以調整影像。

使用電視節目指南（EPG）（僅限於數位頻道）

1 在數位模式中，按 GUIDE。 2 按照顯示於下表或螢幕上的指示進行

您要的操作。

電視節目指南（EPG）

若要操作方法

觀賞節目按 F/f/G/g 選擇一個節目，然後按。

關閉 EPG 按 GUIDE。

觀賞電視

按類別為節目資訊排序－類別清單

設定開始時要自動顯示在螢幕上的節目－提醒

取消提醒－預約清單

1 按藍色按鈕。 2 按 F/f 選擇一個類別，然後按。

1 按 F/f/G/g 選擇一個要顯示的未來節目，然後按。 2 按 F/f 選擇 “提醒”，然後按。

會有一個 c 符號出現在節目資訊旁邊。電視前面板上的

指示燈會點亮橙色的燈。

• 如果將電視切換到待機模式，電視會在節目開始時自動開機。

1 按。 2 按 F/f 選擇 “預約清單”，然後按。 3 按 F/f 選擇要取消的節目，然後按。 4 按選擇 “取消預約”。

會出現一個畫面來確認您要取消的節目。

5 按 G/g 選擇 “是”，然後按。

使用我的最愛清單

類比電視之最愛頻道

我的最愛功能可以讓您從您指定的最多 16 個最愛頻道清單中選擇節目。

1 在類比模式中，按。 2 按照顯示於下表或螢幕上的指示進行

您要的操作。

類比電視之最愛頻道清單

若要操作方法

觀賞頻道按。

關閉我的最愛清單按。

將目前頻道加入我的最愛清單按 F/f 選擇 “新增到最愛頻道”，然後按。

將頻道從我的最愛清單移除

1 按 F/f 選擇 “編輯最愛頻道”，然後按。

“最愛頻道設定”畫面出現。

2 按 F/f 選擇頻道號碼，然後按。 3 按 F/f 選擇 “－－－”，然後按。

數位電視之最愛頻道

您最多可以指定四個最愛頻道清單。

1 在數位模式中，按。 2 按照顯示於下表或螢幕上的指示進行

您要的操作。

數位電視之最愛頻道清單

若要操作方法

關閉我的最愛清單按 RETURN。

在最愛頻道清單中新增或移除頻道

1 按藍色按鈕。

首次新增最愛頻道或者最愛頻道是空的時，請前往步驟 2。

2 按黃色按鈕選擇要編輯的最愛頻道清單。 3 按 F/f/G/g 選擇要新增或移除的頻道，然後按。

觀賞頻道

1 按黃色按鈕選擇一個最愛頻道清單。 2 按 F/f 選擇一個頻道，然後按。

將所有頻道從最愛頻道清單移除

1 按藍色按鈕。 2 按黃色按鈕選擇要編輯的最愛頻道清單。 3 按藍色按鈕。 4 按 G/g 選擇 “是”，然後按。

使用選用的設備

連接選用的設備

您可以將各種選用的設備連接到電視上去。

寬頻路由器

數位相機

使用選用的設備

攝影機

視訊遊戲設備

DVD 播放機

高傳真音響設備

有色差訊號輸出的 DVD 播放機

USB 儲存媒體

攝影機

耳機

音響系統

攝影機

錄影機

有數位輸入的家庭劇院系統

DVD 播放機

PC （HDMI 輸出）

Blu-ray 光碟播放機

（待續）

連接音訊 - 視訊設備（品質順序，從高到低）

連接到連接方法說明

4 HDMI IN 1、2、 3或4

HDMI 訊號線數位視訊和音訊訊號從外接設備輸入。

此外，連接與 HDMI 控制相容的設備時，支援與外接設備的通訊。請參考 38 頁以便設定這種通訊。如果設備有 DVI 插孔，透過 DVI - HDMI 轉接介面（非附件）將 DVI 插孔連接到 HDMI IN 1 插孔，而將設備的音訊輸出插孔連接到 PC IN 插孔中的 PC/HDMI 1 AUDIO IN 插孔。（PC/HDMI 1 AUDIO IN 插孔會被用作 PC IN 和 HDMI IN 1 插孔的音訊輸入插孔。）

• 務必只使用經過認可、有 HDMI 標誌的 HDMI 訊號線。建議使用 Sony HDMI 訊號線（高速型）。

• 連接與 HDMI 控制相容的音響系統時，務必也要將其連接到 DIGITAL AUDIO OUT (OPTICAL) 插孔。

3 / 1 或 2 色差視訊訊號線，

音訊訊號線

使用色差視訊插孔 1 作為視訊插孔 3 時，請在

“視訊 3/ 色差輸入 1”選單中選擇 “視訊 3”（38

頁）。

• 色差視訊插孔 1 和視訊插孔 3 不能同時使用。

2 9 1,1 或2，和1或

S 視訊訊號線或複合視訊訊號線，音訊訊號線

為了避免影像雜訊，請勿將攝影機同時連接到視訊插孔

1 和 S 視訊插孔 1。如果連接單聲道設備，請連接到 L （MONO）插孔 1 或 2。使用視訊插孔 1 和音訊插孔 1 作為輸出插孔時，請在 “視訊 1 輸入 / 輸出”選單中選擇 “輸出”（38 頁）。

連接音訊 / 可攜式設備

連接到連接方法說明

5 DIGITAL AUDIO OUT (OPTICAL)

1 音訊訊號線您可以在外接的高傳真音響設備上聆聽電視的聲音。 8 USB USB 訊號線您可以享受儲存在 Sony 數位相機或攝影機上的照片 / 音

光纖音訊訊號線您可以在有數位輸入的外接家庭劇院系統上聆聽電視的

聲音。

樂 / 視訊檔案（22 頁）。

連接其他設備

連接到連接方法說明

6 / PC IN 附有鐵蕊的 PC 訊號

線，音訊訊號線

7 LAN LAN 訊號線您可以享受電視的網路功能（27 頁）。 0 i 耳機您可以經由耳機聆聽電視的聲音。

使用有鐵氧體磁蕊的 PC 訊號線是絕對必要的。

觀看來自連接的設備的影像

打開連接的設備，然後執行下列操作。

1 按。 2 按 F/f 選擇您要的

輸入來源，然後按

。

若要同時觀賞兩個畫面

-雙重畫面/子母畫面

您可以在螢幕上同時觀賞兩個畫面（外部或 PC 輸入和電視節目）。您每按一下，觀賞模式就會從 “雙重畫面”到 “子母畫面”到單一畫面模式循環變更。

•“PC 電源管理”（31 頁）不能用於子母畫面模式中。

• 您可以用數字按鈕或 PROG +/– 選擇電視頻道。

子母畫面模式

1 再按。

模式會從 “雙重畫面”變更為 “子母畫面”。來自外接 PC 或設備的畫面以全尺寸顯示，而電視節目則顯示於右下角。主畫面有聲音時，子畫面的影像會有灰色的框。您可以用 F/f 移動子畫面的位置。

2 反複按或以恢復單一畫面模式。

使用選用的設備

雙畫面模式

1 按。（HDMI(PC) 或 PC 輸入除外）

來自外接設備的畫面顯示在左邊，而電視節目顯示在右邊。灰色框中的畫面有聲音。

2 反複按或以恢復單一畫面模式。

經由 USB 播放相片 / 音樂 / 視訊

您可以經由 USB 訊號線或 USB 儲存裝置在電視上享受儲存在 Sony 數位相機或攝影機中的相片 / 音樂 / 視訊檔案。

1 將支援的 USB 裝置連接到電視機。 2 按 HOME。 3 按 G/g 選擇 “相片”、“音樂”或“影

片”。

4 按 F/f 選擇一個 USB 裝置，然後按。

檔案或資料夾清單出現。若要顯示縮圖清單，請在清單顯示出來時按黃色按鈕。

5 按 F/f 選擇一個檔案或資料夾，然後按

。

選擇資料夾時，要選擇一個檔案，然後按。就會開始播放。

自動開始播放相片

如果數位相機或其他儲存相片檔案的裝置連接到 USB 連接埠並開啟，電視就會在開機時自動開始播放相片（37 頁）。

• 電視存取 USB 裝置上的資料時，請遵守下列事項：

- 不要關閉電視或外接的 USB 裝置。

- 不要拔掉 USB 訊號線。

- 不要卸除 USB 裝置。 USB 裝置上的資料可能會受損。

• 對於任何外接裝置或電視的故障造成記錄媒體上的任何資料損壞或遺失，Sony 恕不負責。

• 如果在連接數位相機或其他裝置到 USB 連接埠之後開啟電視，不會自動開始播放。

• 下列音樂檔案格式被支援 USB 播放：

- JPEG （副檔名為 “.jpg”而且符合 DCF 2.0

或 Exif2.21 的 JPEG 格式的檔案）

- RAW （副檔名為 “.arw”的 ARW/ARW 2.0 格

式的檔案。僅適用於預覽。）

• 下列音樂檔案格式被支援 USB 播放：

- MP3 （副檔名為 “.mp3”而且沒有版權的檔

案）

• 支援下列視訊檔案格式的 USB 播放：

- MPEG1 （副檔名為 “.mpg”的檔案）

• 自動開始播放相片只適用於最新的數位相機資料夾內的相片檔案（符合 DCF 標準、編號最高的 “DCIM” 資料夾）。

• 連接某些數位相機（例如有內部記憶體的相機）時，可能不會自動開始播放。

• 檔案名稱與資料夾名稱只支援英文。

• 連接 Sony 數位相機時，要將相機的 USB 連接模

式設定為自動或 “Mass Storage”。關於 USB 連接模式的詳細資訊，請參考數位相機所附的說明。

• 關於相容 USB 裝置的最新資訊，請查看下列網站。 http://www.sony-asia.com/bravia/ flash.html

• 請使用符合 USB Mass Storage Class 標準的 USB 儲存裝置。

• 您可以登記用（相片）放映幻燈片時要播放的背景音樂。播放音樂時按 OPTIONS 然後選擇 “添加至 BGM 選單”，或者在顯示相片時按

OPTIONS，然後選擇 “背景音樂選擇”。

若要顯示相片

-畫面幀

您可以在選擇的一段時間內將相片顯示在螢幕上。過了那一段時間之後，電視會自動切換到待機模式。

1 選擇一張相片（22 頁）。 2 選擇的相片顯示出來時按 OPTIONS，

然後按 F/f 以選擇 “檔案選項”並按

。

3 按 F/f 選擇 “畫面幀圖像”，然後按

。

4 反複按 RETURN 回到主選單。 5 按 G/g 選擇 “相片”，然後選擇 “畫

面幀”並按。電視會切換至畫面幀模式，而選擇的

相片則會顯示在螢幕上。

若要設定顯示相片的持續時間

按 OPTIONS，然後選擇 “持續時間” 並按。然後選擇持續時間並按。計數器就會出現在螢幕上。

若要返回 XMB™

按 RETURN。

• 如果相片選自 USB 裝置，裝置必須保持連接到電視上。

• 如果啟用 “睡眠定時器”，電視會自動切換到待機模式。

若要以地圖上的地點顯示相片

使用具有 GPS 功能的數位相機時，可以利用 GPS 功能記錄經緯度，以便以相片拍攝地點的地圖顯示相片。地圖資訊是從網際網路的線上地圖服務下載的，因此必須要有網路連線，而且電視必須連線到網路

（27 頁）。

1 選擇一張相片（22 頁）。 2 按綠色 / 紅色按鈕將地圖放大 / 縮小。

若要變更地圖在電視螢幕上的顯示位置，請反複按藍色按鈕。

• 網際網路線上地圖服務是由協力廠商提供的，因此可能在沒有事先通知使用者的情況下變更或終止。

• 地圖上指示的地點可能因為數位相機而異。

• 如果電視沒有連接到網際網路或者網際網路線

上地圖服務終止，只會顯示不能縮放的大比例尺地圖。

• 如果相片的 Exif 數據包含日期資訊，而且有用 Sony GPS 定位儀記錄相關的經緯度資訊

（“日誌檔案”），便可以顯示地圖。請按照下

述程序進行。

1 將 GPS 定位儀連接到 USB 連接埠。 2 按 HOME。 3 按 G/g 選擇 “相片”。 4 按 F/f 選擇 GPS 定位儀，然後按。 5 用F/f 選擇下列項目，然後用 F/f 加以

設定。

-時區

- 日光節約時間

6 選擇 “是”，然後按。

GPS 日誌檔案就會載入。

7 拔掉 GPS 定位儀，然後將儲存相片的裝

置連接上去。

8 選擇一張相片（22 頁）。 9 按綠色 / 紅色按鈕將地圖放大 / 縮小。

使用選用的設備

以 HDMI 控制使用 BRAVIA Sync

HDMI 功能控制讓電視機能夠以 HDMI CEC

（Consumer Electronics Control，消費者

電子產品控制）和與此功能相容的外接設備通訊。例如，藉著連接與 HDMI 控制相容的 Sony 設備（有 HDMI 訊號線），您可以一起控制它們。務必要正確地連接設備，並且進行必要的設定。

HDMI 控制

• 在您以遙控器將電視切換到待機模式時，自動關閉外接設備。

• 外接設備開始播放時，自動開啟電視機並將輸入切換到該設備。

• 如果在電視開啟時打開外接音響系統，聲音輸出會從電視揚聲器切換到音響系統。

• 調整音量（2 +/–）並將外接音響系統靜音（%）。

• 您可以按下列按鍵以電視機遙控器操作有 BRAVIA Sync 標誌的 Sony 外接設備。

-按N/x/X/m/M/./> 以便直接操

作外接設備。

-按SYNC MENU 將外接的 HDMI 設備的選單顯

示在螢幕上。顯示選單之後，可以用 F/f/G/g、、彩色按鈕和 RETURN 操作選單畫面。

- OPTIONS 以顯示 “裝置控制”，然後從 “選

項”和 “內容清單”選擇選項以便操作設備。

- 關於可用的控制，請參考設備的說明書。

• 如果電視的 “HDMI 控制”設定為

“開”，外接設備的 “HDMI 控制”也會

自動切換為 “開”。

若要連接與 HDMI 控制相容的設備

用 HDMI 訊號線連接相容設備與電視機。連接音響系統時，務必還要用光纖音訊訊號線連接電視的 DIGITAL AUDIO OUT (OPTICAL) 插孔和音響系統。詳情請參閱 19 頁。

若要進行 HDMI 控制設定

電視和外接設備都必須進行 HDMI 控制設定。關於電視方面的設定，請參閱 “HDMI 設定”（38 頁）。關於外接設備的設定，請參考該設備的使用說明。

用電視遙控器操作選用的設備

用來使用選用設備的按鈕

詳情請參考外接設備所附的使用說明。

項目說明

"/1 開啟或關閉以功能按鈕選擇

的選用設備。

功能按鈕讓您操作相關的設備。詳情

BD/DVD 操作按鈕

DVD 錄影按鈕• z REC：開始錄影。

5 F1/F2

BD/DVD MENU

BD/DVD TOP MENU

請參閱 “為遙控器編碼”

（25 頁）。

• ./>：前往上一個標

題 / 章節 / 場景 / 曲目或下一個標題 / 章節 / 場景 / 曲目。

• / ：重播場景 / 讓場景短暫地快速前進。

• m/M：播放中按下時將光碟快速倒轉 / 快速前進。

• N：以正常速度播放光碟。

• X：暫停播放。

• x：停止播放。

• X REC PAUSE：暫停錄

影。

• x REC STOP：停止錄影。

• 使用光碟換片器時選擇一張光碟。

• 使用組合式機器（例如 DVD/HDD）時，選擇一種功能。

顯示 BD/DVD 光碟選單。

顯示 BD/DVD 光碟的最上層選單。

使用選用的設備

• N 按鈕有觸摸點。請利用觸摸點做為操作其

他設備時的參考。

為遙控器編碼

本遙控器預設用來操作 Sony 電視機、大部分 Sony Blu-ray 光碟播放機、DVD 播放機、DVD/HDD 錄影機和音響系統（家庭劇院等）。若要控制這種 Sony Blu-ray 光碟播放機、 DVD 播放機和 DVD/HDD 錄影機，請按下列方式設定遙控器。

• 開始之前，請從 “廠商的代碼”（26 頁）查出您的設備的代碼。

（待續）

如果您的設備不能使用，或者某些功能不能使用

輸入正確的代碼或者嘗試該品牌在清

單中的下一個代碼。請注意，這份清單可能不包含所有廠牌所有型號的代碼。

若要恢復普通的電視操作

按 TV 功能按鈕。

1 按住遙控器上您要設定的 BD、DVD 或

AMP 功能按鈕，然後按。選定的功能按鈕（BD、 DVD 或

AMP）會閃爍。

2 按數字按鈕，以便在功能按鈕閃爍時

輸入廠牌代碼。如果沒有在 30 秒鐘內輸入代碼，必須

回到步驟 1。

3 按。

選定的功能按鈕會閃爍兩次。如果選定的功能按鈕閃爍五次，請再從步驟 1 開始進行。

4 打開您的設備，檢查下列主要功能是

否能夠使用。對於 Blu-ray 光碟播放機、DVD 播放機

和 DVD/HDD 錄影機，請檢查： N （播放）、 x （停止）、 m （倒轉）、 M （快速前進）、頻道選擇。對於 DVD 播放機和 DVD/HDD 錄影機，請檢查： TOP MENU/MENU 和 F/f/G/g。

廠商的代碼

DVD 播放機

廠牌代碼

SONY 0001, 0024, 0023, 0025, 0038

Blu-ray 光碟（BD）播放機

廠牌代碼

SONY 0501 - 0503

DVD/ 卡式帶錄影機

廠牌代碼

SONY 0207, 0222

DVD/HDD 錄影機

廠牌代碼

SONY 0219, 0220, 0221

錄影機

廠牌代碼

SONY VTR1:Betamax 1001，1007，1010，1011

VTR2:8 釐米 1002，1008 VTR3:VHS 1003，1009 VTR4:DV 1004 VTR5:DV 1005 VTR6:DV 1006

DAV 家庭劇院系統

廠牌代碼

SONY （DAV） 4501 - 4506

AV 接收機

廠牌代碼

SONY 4001, 4002, 4056, 4057, 4085

數位地面波接收機

廠牌代碼

SONY 3101, 3102 now TV 3103, 3104 CABLE TV 3105

使用家庭網路功能

利用本電視機，您可以欣賞儲存於家庭網路上 DLNA 相容裝置中的內容。儲存並提供相片 / 音樂 / 視訊檔案之類內容的裝置叫做 “服務器”。電視經由網路從服務器接收相片 / 音樂 / 視訊檔案，即使在別的房間裡，您也可以在電視上享受這些相片 / 音樂 / 視訊檔案。若要享受家庭網路，必須要有 DLNA 相容裝置作為服務器。請到 28 頁確認可用的網路服務器。此外，當您將電視連接到網際網路時，便可以享受在地圖上標示出其地點的相片

（23 頁）。

• 您需要與網際網路服務提供者簽約才能連線到網際網路。

連線到網路

電視

網路訊號線

（非附件）

寬頻路由器

連接到網路裝置

網路訊號線（非附件）

DSL 數據機 / 訊號線數據機

經由網路享受相片 / 音樂 / 視訊檔案

您只要選擇電視主選單上的一個圖示，便可以輕鬆地享受服務器上的相片 / 音樂 / 視訊檔案。

1 按 HOME。 2 按 G/g 選擇 “相片”、“音樂”或“影

片”。

3 按 F/f 選擇一個服務器，然後按。

檔案或資料夾清單出現。若要顯示縮圖清單，請在清單顯示出來時按黃色按鈕。

找不到服務器時

請參閱 “檢查網路的連線情形”（28 頁）和 “調整服務器顯示設定”（29 頁）。

4 按 F/f 選擇一個檔案或資料夾，然後按

。

選擇資料夾時，要選擇一個檔案，然後按。就會開始播放。

• 如果經緯度資訊有記錄到相片的 Exif 數據中，便可以用相片顯示地圖（23 頁）。

• 視網路裝置而定，電視可能需要向網路裝置登記。

• 使用（相片）時畫質可能會比較粗糙，因為影像可能會根據檔案放大。而且影像也可能不會充滿整個畫面，要視影像大小和長寬比而定。

• 使用（相片）時，有些相片檔案可能需要一點時間來顯示。

• 若要播放從網路裝置接收的檔案，這些檔案必須符合下列檔案格式之一：

- 靜態影像：JPEG 格式

- 音樂：MP3 格式或線性 PCM 格式

- 視訊：服務器上儲存下列檔案格式：AVCHD、

HDV、MPEG2-PS。在某些情況下，即使這些格式的檔案也不能播放。

使用家庭網路功能

網際網路

（待續）

視網路裝置而定，可能會在傳送前轉換檔案格式。在這種情況下，會以轉換後的檔案格式播放。詳情請參考所用的網路裝置的使用說明書。在某些情況下，即使符合上述檔案格式之一的檔案也不能播放。

• 推薦的 DLNA 相容裝置如下。

- 預先安裝了 “VAIO Media Integrated Server 5.0 版”或更新版本的 VAIO。

- 預先安裝了 “VAIO Media plus 1.0/1.1 版”的 VAIO。

其他的 DLNA 裝置可能無法使用。

• 檔案名稱與資料夾名稱只支援英文。

若要以操作裝置的方式在電視螢幕上享受相片、音樂和視訊

- Renderer

Renderer 是一個用來以操作控制器裝置的方式在電視上播放儲存於網路裝置（數位相機、手提電話等）中的相片、音樂和視訊檔案的功能。若要使用這個功能，必須要以相容於 renderer 的裝置（例如數位相機或手提電話）作為控制器。另請參考控制器所附的使用說明書。

1 如有需要，請在 “網路設定”中設定

“Renderer 功能”、“Renderer 訪問控

制”和 “Renderer 設定”（42 頁）。

2 在電視上播放以控制器選擇的檔案。

檔案會經由連線的網路在電視上播放。播放時請用控制器或電視的遙控器執行操作。

• 您可以登記用（相片）放映幻燈片時要播放的背景音樂。播放音樂時按 OPTIONS 然後選擇 “添加至 BGM 選單”，或者在顯示相片時按 OPTIONS，然後選擇 “背景音樂選擇”。

檢查網路的連線情形

輸入您的路由器的相應（文字與數字）數值。要設定的項目可能不同，要視網際網路服務提供者或路由器而定。詳情請參考您的網際網路服務提供者所提供或者路由器所附的使用說明書。

1 按 HOME。 2 按 G 選擇 “設定”。 3 按 F/f 選擇 “網路設定”，然後按。 4 選擇 “網路”，然後按。 5 選擇 “IP 地址設定”，然後按。 6 選擇一個項目，然後按。

選擇 “DHCP (DNS 自動 )”時

請前往步驟 7。

選擇 “DHCP (DNS 手動 )”時

用 F/f/g 和數字按鈕設定 “主 DNS”/

“副 DNS”。

選擇 “手動”時

用 F/f/g 和數字按鈕設定下列項目。

• IP 地址

• 子網路遮罩

• 預設閘道器

• 主 DNS/ 副 DNS

如果您的 ISP 有特定的代理服務器設定

按 OPTIONS，然後按 F/f 選擇 “代理設定”並按。然後輸入設定。

7 按。 8 按 g 選擇 “測試”，然後按。 9 按 G/g 選擇 “是”，然後按。

網路診斷開始。

“連接成功。”訊息出現時，反複按

RETURN 以便離開。

• 如果 “連接成功。”沒有出現，請參閱 “解決問題”（49 頁）。

調整服務器顯示設定

您可以選擇要顯示在主選單上的家庭網路服務器。主選單上最多可以自動顯示 10 個服務器。

1 設定讓服務器允許來自電視的連線。

關於服務器上的設定的詳細資訊，請參考服務器所附的使用說明。

2 按 HOME。 3 按 G/g 選擇 “設定”。 4 按 F/f 選擇 “網路設定”，然後按。 5 選擇 “服務器顯示設定”，然後按。 6 選擇要顯示在主選單上的服務器，然

後按。

7 選擇 “是”，然後按。

如果無法連線到您的家庭網路

電視可以檢查服務器是否被正確地辨識出來。

1 按 HOME。 2 按 G/g 選擇 “設定”。 3 按 F/f 選擇 “網路設定”，然後按。 4 選擇 “服務器診斷”，然後按。 5 選擇 “是”，然後按。

服務器診斷開始。服務器診斷完成時，會出現診斷結果清單。

6 選擇您要確認的服務器，然後按。

選定的服務器的診斷結果出現。

• 如果診斷結果顯示有故障，找出可能的原因和解決方法，並且檢查連線和設定。詳情請參閱 “解決問題”（49 頁）。

使用家庭網路功能

使用選單功能

在 XMB™ 上導覽電視主選單

XMB™（XrossMediaBar）是 BRAVIA 功能和顯示於電視螢幕上的輸入來源的選單。XMB™是在您的 BRAVIA 電視上輕鬆地選擇節目和調整設定的方法。

1 按 HOME 顯示 XMB™。

媒體分類列

分類目標列

2 按 G/g 選擇分類。

媒體分類圖示說明

設定您可以進行進階設定和調整。關於設定的詳情，請參閱 31 頁。

相片您可以經由 USB 裝置或網路欣賞相片檔案（22、27 頁）。

音樂您可以經由 USB 裝置或網路欣賞音樂檔案（22、27 頁）。

影片您可以經由 USB 裝置或網路享受視訊檔案（22、27 頁）。

數位您可以選擇一個數位頻道、數位電視之最愛頻道清單（18 頁）

類比您可以選擇類比頻道或類比電視之最愛頻道清單（18 頁）。

外部輸入您可以選擇連接到電視的設備。

或電視節目指南（EPG）（17 頁）。

若要隱藏類比頻道清單，請將 “節目清單顯示”設定為 “關”

（39 頁）。

若要指定標籤給外部輸入，請參閱 “視訊標籤”（37 頁）。

3 按 F/f 選擇一個選項，然後按。 4 按照螢幕上的指示進行。 5 按 HOME 退出。

• 您可以調整的選項會因情況而異。

• 不可用的選項會變成灰色或者不顯示出來。

電視設定選單

系統更新

用來在將來更新電視系統軟體。

BRAVIA 小秘訣

介紹如何享用電視。

時鐘 / 定時器

睡眠定時器設定讓電視在一段時間之後自動切換到待機模式。

“睡眠定時器”啟用時，電視前面板上的（定時器）指示燈會點亮橙色。

• 如果關閉電視之後再打開，“睡眠定時器”會被重設為 “關”。

開機定時器設定讓電視自動從待機模式開啟。自動時間更新切換到數位模式並取得時間。時鐘設定讓您以手動方式調整時鐘。

• 電視接收數位電視頻道時，您不能手動調整時鐘，因為時鐘會自動從廣播訊號接收時間代碼。

使用選單功能

節能

重新設定將所有的 “節能”設定重設為原廠設定。省電模式調整背光以降低電視的耗電量。

選擇 “關閉畫面”時，畫面會關閉，電視前面板上的（關閉畫面）指示燈會點亮綠色。聲音不受影響。

自動關機設定電視閒置達到預設的時間長度時，將電視關閉。 PC 電源管理電視 30 秒鐘沒有接收到來自 PC 輸入來源的訊號時，將電視切換到待機模

式。

光感應器根據室內的周邊光線自動對畫面進行最好的設定。

• 請不要將任何東西放在感應器上，那樣做可能會影響其功能。請參閱 14 頁以查看感應器的位置。

畫質設定

輸入對象讓您為目前觀賞的輸入選擇使用共通的設定或自訂的設定。

一般套用共通設定至所有輸入，其中的 “輸入對象”會被設

目前輸入的名稱

（例如，視訊 1）

畫質模式設定畫質模式。可以選擇的選項會因 “場景選擇”設定而異。

鮮明增強影像的對比與鮮明度。標準用於標準畫面。建議用於家庭娛樂。自訂讓您儲存您喜好的設定。電影院用來觀賞基於影片的內容。最適合用來在劇院般的環境

相片 - 鮮明用來觀賞相片。增強影像的對比與鮮明度。相片 - 標準用來觀賞相片。在家中觀賞時提供最佳畫質。相片 - 原始用來觀賞相片。再現進行相片的影像處理時使用的畫

相片 - 自訂用來觀賞相片。讓您儲存您喜好的設定。體育為觀賞運動節目提供最佳畫質。遊戲最適合用來在電視上玩遊戲。圖像為觀賞圖像提供最佳畫質。

重新設定將 “輸入對象”、“畫質模式”和 “進階設定”以外的所有 “畫質設定”

重新設定為出廠設定。

背光調整背光的亮度。對比度提高或降低畫面的對比。亮度讓畫面變亮或變暗。色彩提高或降低色彩強度。色調提高或降低綠色調和紅色調。

定為 “一般”。讓您為輸入進行自訂設定。

中觀賞電視。

質。

•“色調”只能針對 NTSC 色彩系統（例如美國的錄影帶）進行調整。

色溫調整畫面的白色。

冷色溫讓白色帶有藍色的色調。中間色溫讓白色帶有中性的色調。暖色溫 1/ 暖色溫 2讓白色帶有紅色的色調。“暖色溫 2”可以提供比 “暖

•“暖色溫 1”和 “暖色溫 2”不能用於 “畫質模式”設定為 “鮮明”時

（或 “相片 - 鮮明”）。

銳利度讓畫面變得鮮明或柔和。噪訊抑制抑制影像噪訊（雪花般的影像）。

色溫 1”更紅的色調。

MPEG 噪訊抑制降低 MPEG 壓縮視訊的畫面噪訊。這點在觀賞 DVD 或數位廣播時有效。 Motionflow 提供更順暢的畫面動作並減少畫面模糊的情形。

高為基於影片之類的內容提供更順暢的畫面動作。標準提供順暢的影像動作。用這項設定作為標準用途。關 “高”或 “標準”設定造成雜訊時，使用這項設定。

• 即使已經變更設定，也可能看不出效果，要視乎視訊而定。

電影播放以軟片拍攝的 DVD 或錄影機影像時，提供更好的畫面動作，以減少畫面

模糊和粗糙的顆粒。自動 1 提供比基於影片的原始內容更流暢的畫面動作。用這項

設定作為標準用途。

自動 2 以原貌呈現基於影片的原始內容。

• 如果影像包含不規則訊號或太多雜訊，即使選擇 “自動 1”或 “自動 2”，“電影”也會被自動關閉。

進階設定讓您更詳細的設定 “畫質設定”。這些設定在 “畫質模式”設定為 “鮮

明”（或 “相片 - 鮮明”）時不能使用。

重新設定將所有進階設定重設為原廠設定。黑色校正增強畫面的黑色區域，以產生更強的對比。進階對比度增強根據螢幕亮度自動將 “背光”和 “對比度”調整為最適

合的設定。這項設定對於陰暗影像的場景特別有效，會增加影像比較陰暗的場景的對比清晰度。

伽瑪調整畫面的明亮與陰暗區域之間的均衡。自動亮度限制器抑制耀光（例如在整個畫面都是白色的場景中）。白色清晰度強調白色。色彩空間改變色彩的再現範圍。“寬”再現生動的色彩，而 “標

準”則可以再現標準色彩。

動態色彩讓色彩更生動。白平衡調整各種顏色的色溫。

使用選單功能

聲音設定

輸入對象讓您為目前觀賞的輸入選擇使用普通的設定或自訂的設定。

一般套用普通設定至所有輸入，其中的 “輸入對象”會被設

目前輸入的名稱

（例如，視訊 1）

聲音模式設定聲音模式。“聲音模式”包含最適合視訊和相片的選項。可以選擇的選

項會因 “場景選擇”設定而異。

動態增強高頻和低頻的聲音。標準代表標準的聲音。建議用於家庭娛樂。清晰語音讓語音更清晰。

重新設定將 “輸入對象”、“聲音模式”和 “雙聲道”以外的所有 “聲音設定”重

新設定為出廠設定。

高音調整高頻的聲音。低音調整低頻的聲音。平衡強調左邊或右邊的揚聲器。智慧型音量控制讓所有節目和廣告（例如，廣告的音量通常都會比節目的音量大）的音量

保持穩定。

音量偏移當 “輸入對象”被設定為目前的輸入名稱時（例如，視訊 1），對於目前輸

入的音量做相對於其他輸入的調整。

環繞音效讓您根據電視節目的類型（電影、運動、音樂等等）或視訊遊戲選擇合適

的環繞音效。可以選擇的選項會因 “場景選擇”設定而異。

S-FORCE Front Surround

模擬立體聲為單聲節目添加有如環繞音的效果。電影院發出有如電影院中的高級音響系統的環繞音效。音樂發出環繞音效，讓您覺得有如身在被聲音環繞的音樂廳

體育發出環繞音效，讓您覺得有如在現場觀賞體育比賽。遊戲提供提升遊戲聲音的環繞音效。關將多聲道音訊轉換並再生為 2 聲道。如果是其他音訊格

語音清晰調整人聲的音量。例如，如果新聞廣播員的聲音不清楚，可以調高這項設

定，使得聲音更大。相反的，如果正在觀賞運動節目，可以調低這項設定，使得評論員的聲音更柔和。

聲音增強補充高頻段以再生清晰的聲音。聲音強化強調高頻和低頻的聲音以產生更具衝擊力的更飽滿的聲音。

定為 “一般”。讓您為輸入進行自訂設定。

提供環繞音效，協助您只以兩支電視內部揚聲器就能享受虛擬的多聲道環繞音。

中。

式，則會再生原始音訊。

雙聲道為立體聲或雙語廣播設定來自揚聲器的聲音。

立體聲 / 單聲道適用於立體聲廣播。主聲道 / 副聲道 /

單聲道

對於雙語廣播，請為聲道 1 選擇 “主聲道”, 為聲道 2 選擇 “副聲道”，或者為單聲道選擇 “單聲道”（如果可供選擇）。

• 如果選擇連接到電視機的其他設備，請將 “雙聲道”設定為 “立體聲”、

“主聲道”或 “副聲道”。

螢幕設定（適用於 PC 以外的輸入）

輸入對象讓您為目前觀賞的輸入選擇使用普通的設定或自訂的設定。

一般套用普通設定至所有輸入，其中的 “輸入對象”會被設

目前輸入的名稱

（例如，視訊 1）寬螢幕模式請參閱 “若要以手動方式改變寬螢幕模式”（16 頁）。自動寬螢幕模式根據輸入訊號自動變更 “寬螢幕模式”。如果想要使用您在 “寬螢幕模式”

中指定的設定，請選擇 “關”。

4:3 預設顯示模式為 4:3 的廣播設定預設的寬螢幕模式。

寬變焦模式將 4:3 的畫面放大以填滿 16:9 的螢幕，儘可能保持原始

4:3 顯示模式以正確的比率顯示傳統的 4:3 廣播。關使用您在 “寬螢幕模式”中指定的設定。

顯示區域調整影像顯示區域。

自動自動切換到最合適的顯示區域。全畫素部分影像被切除時，以原始尺寸顯示影像。 +1 以原始尺寸顯示影像。正常以建議的尺寸顯示影像。

-1/-2 將影像放大，使得邊緣超出可以看到的顯示區域。水平修正調整畫面的水平位置。垂直修正 “寬螢幕模式”設定為 “寬變焦模式”或 “變焦模式”時，調整畫面的垂

直位置。

垂直高度 “寬螢幕模式”設定為 “寬變焦模式”時，調整畫面的垂直大小。

定為 “一般”。讓您為輸入進行自訂設定。

影像。

使用選單功能

螢幕設定（適用於 PC 輸入）

自動調整電視接收來自外接 PC 的輸入訊號時，自動調整畫面的顯示位置、相位和位

重新設定將所有 PC 畫面設定重設為出廠設定。相位螢幕閃爍時調整相位。位距畫面有不想要的垂直條紋時調整位距。水平修正調整畫面的水平位置。垂直修正調整畫面的垂直位置。寬螢幕模式設定 “寬螢幕模式”以便顯示來自 PC 的影像。

距。

•“自動調整”對於某些輸入訊號的效果可能不是很好。遇到這種情況時，

請用手動方式調整 “相位”、“位距”、“水平修正”和 “垂直修正”。

正常模式以原始尺寸顯示畫面。全螢幕模式 1 將影像放大以填滿垂直顯示區域，同時保持其原來的長

寬比。

全螢幕模式 2 將畫面放大以填滿整個顯示區域。

視訊設定

x.v.Colour 藉著將電視與影像來源的色彩空間配合，顯示更忠實於原始影像來源的動態

影像。

如果輸入訊號是 HDMI （RGB），即使您選擇 “x.v.Colour”，設定也會被自動設定為 “一般”。

相片色彩空間選擇一個選項（sRGB、sYCC、Adobe RGB）以設定最適合相片色彩空間的影

像畫質。如果設備將相片的輸出色彩空間從 sYCC 或 Adobe RGB 轉換為 x.v.Colour 或 xvYCC，請選擇 “sYCC”。所得到的影像畫質最適合原始的色彩空間。如果 RGB 訊號是經由 HDMI 輸入來輸入，即使您已經選擇 “sYCC”，也會自動設定為 “sRGB”。

彩色系統根據輸入來源的輸入訊號設定彩色系統（“自動”、“PAL”、“SECAM”、

“NTSC3.58”或 “NTSC4.43”）。

音訊設定

揚聲器電視機揚聲器開啟電視揚聲器並從其中輸出電視的聲音。

音響系統關閉電視揚聲器，並且從連接到電視音訊輸出插孔的外

聲音輸出可變動使用外接音響系統時，來自音訊輸出的輸出音量可以用

固定電視的音訊輸出是固定的。請利用音訊接收器的音量控

耳機設定 i 揚聲器連結連接耳機到電視時，開啟 / 關閉電視的內部揚聲器。

i 音量在“i 揚聲器連結”設定為 “關”時調整耳機的音量。 i 雙聲道為雙語廣播設定來自耳機的聲音。

光纖輸出設定從電視的 DIGITAL AUDIO OUT (OPTICAL) 插孔輸出的音訊訊號。連接的

設備與 Dolby Digital 相容時，設定為 “自動”。連接的設備與 Dolby Digital 不相容時，設定為 “PCM”。

接音響設備輸出電視的聲音。

電視遙控器控制。

制透過音響系統調整音量（以及其他音訊設定）。

設定

USB 自動啟動如果數位相機或其他儲存相片檔案的裝置連接到 USB 連接埠並開啟，電視就

會在開機時自動開始播放相片。

• 如果在連接數位相機或其他裝置到 USB 連接埠之後開啟電視，不會自動開

始播放。

快速開始用遙控器開啟電源，電視開機的速度會比平常快。不過，待機模式的耗電量

會比平常高約 16 瓦。可以設定 5 個時區中的 3 個。

視訊標籤為連接到側面和背後插孔的設備指定一個圖示或名稱。當您選擇設備時，圖

示或名稱會短暫的出現在螢幕上。

1 按 F/f 選擇您要的輸入來源，然後按。

略過輸入為各項輸入設定是否要顯示在主選單上或者會在您按

時出現的輸入清單中。

自動

只有在連接設備時顯示圖示和名稱。

持續顯示

不論是否連接設備，都要顯示圖示和名稱。

跳過

即使連接設備，也不要顯示圖示和名稱。

2 按 g 以指定圖示和名稱。

設定輸入標籤用預設的標籤為連接的設備指定名稱。

讓您在選擇 “編輯”時建立自己的標籤。

編輯

讓您在編輯畫面中編輯名稱，並選擇適當的圖示。

使用選單功能

（待續）

視訊 1 輸入 / 輸出在輸入與輸出模式之間切換視訊插孔 1 和音訊插孔 1。

自動 S 視訊將設備連接到視訊 1 和視訊 1 插孔時，設定來自 S 視訊插孔視

視訊 3/ 色差輸入 1 切換色差視訊插孔 1 和視訊插孔 3。

設定為 “輸出”時，輸出在螢幕上觀賞的任何影像（來自 / 1或2、 HDMI IN1、2、3 或 4 以及 / PC IN 插孔的訊號除外）。

訊 1 的輸入視訊。

• 色差視訊插孔 1 和視訊插孔 3 不能同時使用。

HDMI 設定讓電視機能夠和與 HDMI 控制功能相容而且連接到電視機 HDMI 插孔的設備通

訊。請注意，外接設備也必須進行通訊設定。 HDMI 控制設定是否連結 HDMI 控制相容外接設備和電視機的操作。

設定為 “開”時，可以使用下列功能。如果連接特定的 HDMI 控制相容的 Sony 設備，用電視機將 “HDMI 控制”設定為 “開”時，這項設定會自動套用至外接設備。

設備自動關機這個項目設定為 “開”時，外接的 HDMI 控制相容設備

會跟著電視機一起關閉。

自動開啟電視這個項目設定為 “開”時，電視機會隨著外接的 HDMI

控制相容設備一起開啟。

HDMI 裝置清單顯示與 HDMI 控制相容的外接設備清單。

• 如果電視操作連結到與 HDMI 控制相容的音響系統操作，就不能使用“HDMI

控制”。

自動啟動您可以執行首次連接電視時出現的初始設定，並且選擇語言或者再度調入所

標誌照明點亮和關閉電視前方的 Sony 標誌。語言 /Language 設定顯示於選單畫面上的語言。產品資訊顯示電視的產品資訊。出廠設定將 “兒童鎖”設定、“最愛頻道”設定和節目預設資料以外的所有設定重新

有可看的頻道。即使已經在首次連接電視時做過設定，也可能需要在搬家之後或者要搜尋新開播的頻道時變更設定。

設定為出廠設定。完成這項處理之後，初始設定畫面就會顯示出來。在初始設定中完成自動調諧，會重設沒有被 “出廠設定”重設的設定。若要保留設定，請跳過 “自動調頻”。

類比設定

節目清單顯示選擇 “關”，以隱藏 XMB™ （XrossMediaBar）上的類比頻道清單。單鍵數位直接選台 “單鍵數位直接選台”設定為 “開”時，您可以利用遙控器上的一個預設數

字按鈕（0 - 9）選擇一個類比頻道。

•“單鍵數位直接選台”設定為 “開”時，不可以在遙控器上輸入兩位數以

選擇 10 以上的頻道號碼。

最愛頻道設定讓您以指定頻道號碼的方式設定您的最愛頻道。

若要重設我的最愛頻道，請選擇 “－－－”。

自動調頻調入所有可以使用的類比頻道。

您可以在搬家之後或者要搜尋新開播的頻道時重新調諧電視。

節目排序改變儲存於電視中的類比頻道的順序。

1 按 F/f 選擇您要移到新位置的頻道，然後按。 2 按 F/f 選擇頻道的新位置，然後按。

節目標籤最多用五個字母或數字指定您選擇的頻道名稱。當您選擇頻道時，名稱會短

暫出現在螢幕上。

1 按 F/f 選擇要命名的頻道，然後按。 2 按 F/f 選擇您要的字母或數字（“_”代表空白），然後按 g。

如果輸入錯誤的字元

按 G/g 選擇錯誤的字元。然後按 F/f 選擇正確的字元。

3 重複步驟 2 直到名稱輸入完成為止。 4 按退出標籤程序。

兒童鎖封鎖個別頻道令其無法觀賞。

1 按 F/f 選擇要封鎖的頻道，然後按。 2 按 F/f 選擇 “封鎖”，然後按。

若要觀賞頻道，選擇 “允許”。

智慧型畫質設定打開並顯示指示器自動抑制畫面噪訊。頻道變更或者顯示從輸入畫面變更

為電視節目時，會顯示訊號強度列。

開自動抑制畫面噪訊。關關閉 “智慧型畫質設定”功能。

使用選單功能

（待續）

手動節目預設若要預設頻道，按 PROG +/– 選擇節目號碼，然後選擇 “標籤”、“AFT”、

“音訊濾波器”、“跳過頻道”、“LNA”或 “彩色系統”。您不能選擇設定

為 “跳過頻道”（40 頁）的節目編號。

節目 / 電視系統 /頻率以手動方式預設節目頻道。

1 按 F/f 選擇 “節目”，然後按。 2 按 F/f 選擇您要以手動方式調頻的節目號碼（如果

要調頻的是錄影機，請選擇節目 0），然後按。

3 按 F/f 選擇 “電視系統”，然後按。 4 按 F/f 選擇接收情況最好的電視廣播系統，然後按

。

5 按 F/f 選擇 “頻率”，然後按。 6 按 G/g 搜尋下一個可用頻道。頻帶（“VHF 低”、

“VHF 高”或 “UHF”）會隨著改變。

標籤將您選擇的名稱指定給選定的頻道。當您選擇頻道時，

這個名稱會短暫出現在螢幕上。若要輸入字元，按照 “節目標籤”（39 頁）中的步驟 2 至 4 進行。

AFT 在您覺得稍微調整可以改善畫質時，讓您對選定的頻道

音訊濾波器單聲道廣播失真時，可以改善個別頻道的聲音。

以手動方式進行微調。選擇 “開”時，微調會自動進行。

• 選擇 “低”或 “高”時，不能接收立體聲或雙重聲音。

跳過頻道按 PROG +/– 選擇頻道時，跳過未使用的類比頻道。若

要選擇您設定跳過的頻道，請使用相關的數字按鈕。

LNA 廣播訊號非常微弱時，改善頻道的畫質（影像噪訊很

多）。

彩色系統根據頻道選擇彩色系統（“自動”、“PAL”、“SECAM”、

訊號強度顯示目前觀賞的節目的訊號強度。

“NTSC3.58”或 “NTSC4.43”）。

數位設定

字幕設定字幕設定設定為 “用於聽障者”時，會以字幕顯示供聽障者使用

的視覺輔助（有這種視覺輔助可用時）。

語言偏好讓您選擇字幕的語言。

音訊設定音訊類型在您選擇 “用於聽障者”時，切換至供聽障者使用的廣

播。

語言偏好設定供節目使用的語言。音訊描述當相應資訊可用時，提供視覺資訊的音訊描述（旁

白）。

混音強度調整電視的主音訊和音訊描述的輸出音量。動態範圍補償不同頻道之間的音量差異（僅限 Dolby Digital 音

訊）。

• 不論 “動態範圍”的設定如何，這個功能可能沒有效果，或者效果可能因節目而異。

MPEG 音訊音量調整 MPEG 音訊的音量。

數位調頻數位自動調頻調入可以使用的數位電視頻道。

您可以在搬家之後或者要搜尋新開播的頻道時重新調諧電視。

節目排序讓您移除或改變儲存於電視中的數位電視頻道的順序。

1 按 F/f 選擇您要移除或移到新位置的頻道。 2 請按下列方式移除或變更數位電視頻道的順序：

若要移除數位電視頻道

按。確認訊息出現後，按 G 選擇以 “是”，然後按。

若要變更數位電視頻道的順序

按 g，然後按 F/f 以選擇頻道的新位置，然後按 G。

3 按 RETURN。

數位手動調頻手動調入數位頻道。

1 按數字按鈕輸入要調頻的頻道號碼，或者按 F/f。 2 找到可用的頻道時，按 F/f 選擇要儲存的頻道，然

後按。

3 按 F/f 選擇要用來儲存新頻道的頻道號碼，然後按

。

重複上述程序以調諧其他頻道。

LNA 廣播訊號非常微弱時，改善頻道的畫質（影像噪訊很

多）。

使用選單功能

（待續）

廣播顯示在您收聽無線廣播時顯示螢幕保護畫面。您可以選擇螢幕保護畫面的顏色、

親子鎖碼設定觀賞的年齡限制。若要觀賞超出您指定年齡的任何節目，請輸入正確的

PIN 號碼請輸入您的 PIN 碼以啟動 “親子鎖碼”。您也可以變更 PIN 碼。

進階設定自動服務更新讓電視在有新的數位服務可以使用時加以偵測並儲存。

顯示任選的顏色、或者觀賞幻燈片（22、28 頁）。若要暫時取消螢幕保護畫面，按任何一個按鈕。

PIN 號碼。

• 9999 是永遠都會被接受的 PIN 號碼。

系統更新讓電視能夠經由您現有的天線 / 訊號線自動接收免費的

軟體更新（有更新發行時）。建議您將設定永遠保持在

“開”。

系統資訊顯示目前的軟體版本和訊號電平。

網路設定

網路 IP 地址設定手動

測試診斷網路是否已經正確地連線。 IP 地址 / 子網路遮

罩 / 預設閘道器 / 主DNS/副DNS

MAC 地址顯示 MAC 位址，這是網路裝置的一個固定的、全球唯一

服務器顯示設定顯示連線的服務器清單，並讓您選擇要顯示在主選單上的服務器。服務器診斷診斷電視是否能夠連線到家庭網路上的各個服務器。 Renderer 功能可以經由網路上的其他控制裝置（例如數位相機或手提電話）在電視上播

放相片 / 音樂 / 視訊檔案。

Renderer 訪問控制讓您指定電視可以訪問的控制器。這個設定被設定為 “開”時，您可以用

控制器在電視上播放相片 / 音樂 / 視訊檔案。

Renderer 設定自動訪問許可讓您選擇是否在網路裝置首次訪問電視時自動允許訪問

Renderer 名讓您設定要顯示在控制器上的電視的名稱。

讓您根據您的網路環境進行網路設定。

DHCP （DNS 手動）

自動取得 DNS 服務器設定值以外的網路設定。您可以手動設定 DNS 設定值。

DHCP （DNS 自動）

經由路由器或網際網路服務提供者的動態主機配置協定服務器功能自動取得網路設定。

在 “IP 地址設定”中選擇 “手動”時，您需要配置各個項目。選擇 “DHCP （DNS 手動）”時，務必要手動輸入 “主 DNS”和 “副 DNS”服務器位址。

的識別碼。

電視。

其他資訊

安裝附件（壁掛式支架）

致用戶：

為了保護產品和安全考慮，Sony 強烈建議由 Sony 經銷商或經過授權的承包商為您安裝電視機。請勿試圖自行安裝。

致 Sony 經銷商和承包商：

進行本產品的安裝、定期維護和檢查時，請特別注意安全。

您的電視可以用壁掛式支架 SU-WL500/SU-WL50B （另售）安裝。

• 請參考壁掛式支架所附的說明，以便正確地進行安裝。

• 請參考 “將桌面底座從電視上拆下來”（7 頁）。

• 請參考 “電視機安裝尺寸表”（44 頁）。

• 請參考 “螺絲和掛勾位置圖 / 表”（45 頁）。

• 鎖緊安裝掛勾時，要將電視擺在桌面底座上。

SU-WL500:

SU-WL50B:

方孔

螺絲 (+PSW 6 × 16)

掛勾

螺絲 (+PSW 6×16)

安裝本產品，尤其是在確定牆壁強度是否能夠支撐電視機重量方面，需要足夠的專業知識。將本產品安裝於牆上的工作務必要委託 Sony 經銷商或經過授權的承包商進行，而且安裝時要特別注意安全。Sony 對於任何因為錯誤操作或不當安裝所造成的損壞或傷害恕不負責。

其他資訊

（待續）

電視機安裝尺寸表

SU-WL500:

螢幕中心點

SU-WL50B:

螢幕中心點

單位：毫米

各安裝角度的長度

角度（0°）角度（20°）

KDL-52Z5500 KDL-46Z5500 KDL-40Z5500

型號

顯示尺寸螢幕中心尺寸

1240 767 46 99 445 498 135 136 369 729 476

1091 672 87 140 436 489 135 136 340 632 467

958 596 126 179 436 489 135 136 314 561 467

C DEFGH

SU-

WL500

SU-WL500 SU-WL50B SU-WL500 SU-WL50B 僅限 SU-WL500

WL50B

上表中的數字可能會因為安裝情況而略有不同。

警告

要用來安裝電視機的牆壁應該至少能夠支撐四倍於電視機的重量。關於其重量，請參考 “規格”（46 頁）。

螺絲和掛勾位置圖 / 表

型號

螺絲的位置掛勾的位置

SU-WL500 SU-WL50B SU-WL500 SU-WL50B

KDL-52Z5500/46Z5500/40Z5500 d、g d、i b

SU-WL500:

螺絲的位置

將安裝掛勾安裝在電視上時。

掛勾的位置

將電視安裝在底座支架上時。

a* b c*

* 掛勾位置 “a”和 “c”不能用於

這些機型。

SU-WL50B:

螺絲的位置

將安裝掛勾安裝在電視上時。

掛勾的位置

將電視安裝在底座支架上時。

a* b c*

其他資訊

掛勾

* 掛勾位置 “a”和 “c”不能用於

這些機型。

底座支架

規格

型號名稱系統

面板系統電視系統

彩色/視訊系統

頻道涵蓋範圍

聲音輸出

輸入/輸出插孔

天線/訊號線

1 1 1

COMPONENT IN1

/ 3

COMPONENT IN2

COMPONENT IN1、2

HDMI IN1、2、3、4

DIGITAL AUDIO OUT (OPTICAL)

PC IN

LAN

電源和其他規格

電源需求螢幕尺寸（對角測量）

顯示解析度耗電量尺寸（大約）

含桌面底座

（寬×高×深）

不含桌面底座

KDL-40Z5500 KDL-46Z5500 KDL-52Z5500

LCD （液晶顯示）面板

類比：B/G、I、D/K、M 數位：DTMB

類比：PAL、PAL60 （僅限視訊輸入）、SECAM、NTSC3.58、NTSC4.43 （僅限視訊輸

入）

數位：MPEG-2 MP@ML/HL、H.264/MPEG-4 AVC MP/HP@L4 類比：B/G: VHF：E2-E12/UHF：E21-E69/CATV：S01-S03、S1-S41

I： UHF：B21-B69/CATV：S01-S03、S1-S41 D/K： VHF：C1-C12、R1-R12/UHF：C13-C57、R21-R60/CATV：S01-S03、 S1-S41 M： VHF：A2-A13/UHF：A14-A79/CATV：A8-A2、A-W+4、W+6-W+84

數位：UHF 10 瓦 +10 瓦

VHF/UHF 的 75 歐姆外接端子

S 視訊輸入（4 針迷你 DIN）

視訊輸入（Phono 插孔）/ 監視器輸出

音訊輸入（Phono 插孔）/ 監視器輸出

視訊輸入（Phono 插孔）

音訊輸入（Phono 插孔）

COMPONENT IN1 支援的格式：1080p、1080i、720p、576p、576i、480p、480i Y：1 Vp-p、75 歐姆、0.3 V 負同步 /P P

R/CR：0.7 Vp-p、75 歐姆

3 視訊輸入（Phono 插孔）支援的格式：1080p、1080i、720p、576p、576i、480p、480i

Y：1 Vp-p、75 歐姆、0.3 V 負同步 /P P

R/CR：0.7 Vp-p、75 歐姆

音訊輸入（Phono 插孔）

視訊：1080/24p、1080p、1080i、720p、576p、576i、480p、480i 音訊：兩聲道線性 PCM 32、44.1 和 48 kHz、16、20 和 24 位元、Dolby Digital

類比音訊輸入（迷你插孔）（僅限 HDMI IN1）

PC 輸入（請參閱 47 頁）數位光纖插孔（兩聲道線性 PCM、Dolby Digital）

音訊輸出（Phono 插孔）

PC 輸入（D-sub 15 針）（請參閱 47 頁） G：0.7 Vp-p、75 歐姆、非綠色同步 /B：0.7 Vp-p、75 歐姆 / R：0.7 Vp-p、75 歐姆 /HD：1-5 Vp-p/VD：1-5 Vp-p

PC 音訊輸入（迷你插孔） USB 埠

耳機插孔

10BASE-T/100BASE-TX 連接頭（連線速度可能因為網路運作環境而異。不能保證本電視的 10BASE-T/100BASE-TX 通訊速率和通訊品質。）

交流電源 220 V － 240 V、50 Hz

40 英吋

（大約 101.6 厘米）

1920 點（水平）× 1080 條線（垂直）

標示於電視的背後

958 毫米× 649 毫米× 303 毫米

958 毫米× 596 毫米× 86 毫米

46 英吋

（大約 116.8 厘米）

1091 毫米× 725 毫米× 330 毫米

1091 毫米× 672 毫米× 86 毫米

B/CB：0.7 Vp-p、75 歐姆 /

B/CB: 0.7 Vp-p、75 歐姆 /

52 英吋

（大約 132.2 厘米）

1240 毫米× 821 毫米× 358 毫米

1240 毫米× 767 毫米× 86 毫米

型號名稱

質量（大約）含桌面底座

不含桌面底座隨附的配件選用的配件壁掛式支架

KDL-40Z5500 KDL-46Z5500 KDL-52Z5500

20.8 千克 25.3 千克 31.3 千克

17.9 千克 21.9 千克 27.2 千克

請參閱 “檢查配件”（4 頁）。

SU-WL500/WL50B

設計與規格可能變更而不事先通知。

PC IN 和 HDMI IN 1、2、3、4 的 PC 輸入訊號參考表

解析度訊號水平（畫素） × 垂直（線條）

VGA

SVGA

XGA

WXGA

SXGA HDTV

640 × 480 31.5 60 VESA

640 × 480 37.5 75 VESA 720 × 400 31.5 70 VESA

800 × 600 37.9 60 VESA

800 × 600 46.9 75 VESA

1024 × 768 48.4 60 VESA

1024 × 768 56.5 70 VESA 1024 × 768 60.0 75 VESA

1280 × 720 45.0 60 EIA 1280 × 768 47.4 60 VESA 1280 × 768 47.8 60 VESA 1280 × 960 60.0 60 VESA 1360 × 768 47.7 60 VESA 1280 × 1024 64.0 60 VESA 1920 × 1080 66.6 60 VESA* 1920 × 1080 67.5 60 EIA*

水平頻率（kHz）垂直頻率（Hz）標準

* 1080p 計時套用至 HDMI 輸入時會被當成視訊計時而不是 PC 計時。這點會影響 “視訊設定”選單和

“螢幕設定”選單設定。

若要檢視 PC 內容，將 “寬螢幕模式”設定為 “16:9 顯示模式”，並且將 “顯示區域”設定為

“全畫素”。

• 本電視的 PC 輸入不支援綠色同步或色差同步。

• 本電視的 PC 輸入不支援隔行掃描訊號。

• 為了享有最佳畫質，建議採用上表中垂直頻率為 60 Hz 的訊號（粗體）。

其他資訊

解決問題

檢查 1 （待機）指示燈是否閃紅色。

1 （待機）指示燈閃爍時

表示自我診斷功能已經啟用。

1 計算每兩秒中斷之間 1 （待機）指示燈閃爍多少次。

例如，指示燈可能會閃爍三次，熄滅兩秒鐘，然後再閃爍三次。

2 按電視上的 1 將其關閉，拔掉交流電源線，然後將指示燈閃爍的情形（閃爍的次數）

告訴您的經銷商或 Sony 服務中心。

1 （待機）指示燈不閃爍時

1 檢查下表中的項目。 2 如果問題仍然存在，將您的電視交給合格的維修人員修理。

情況解釋/解決方法

畫面

沒有影像（螢幕是黑的）也沒有聲音。

螢幕上沒有來自連接到視訊輸入插孔的設備的影像或選單資訊。

發生殘影，或者出現雙重影像。• 檢查天線 / 訊號線的連接情形。

只有雪花和噪訊出現在螢幕上。• 檢查天線是否破損或彎折。

影像扭曲（出現虛線或條紋）。

觀賞電視頻道時畫面或聲音有噪訊。

螢幕上出現微小的黑點和 / 或亮點。

影像輪廓扭曲。 • 在 “Motionflow”中選擇 “標準”或 “關”（33 頁）。如果症狀

影像未以彩色顯示。 • 選擇 “重新設定”（32 頁）。來自連接到 1 或 2 插孔

的設備的影像未以彩色顯示，或者是以不規則的彩色顯示。

• 檢查天線 / 訊號線的連接情形。

• 將電視連接到交流電源插座，然後按電視上的 1。

• 如果 1 （待機）指示燈點亮紅色，按 TV "/1。

• 按顯示輸入清單，然後選擇您要的輸入。

• 檢查選用的設備與電視之間的連接情形。

• 檢查天線的位置和方向。

• 檢查天線的使用壽命是否已經達到限度（正常使用情況為 3 至 5

年，在海邊使用時為 1 至 2 年）。

• 電視要遠離電子噪訊來源，例如，汽車、摩托車、吹風機或選用的設備。

• 安裝選用設備時，要在選用設備與電視之間保留一點空間。

• 檢查天線 / 訊號線的連接情形。

• 天線 / 有線電視的訊號線要與其他連接訊號線保持距離。

• 調整 “AFT”（自動微調）以獲得比較好的影像接收情況

（40 頁）。

• 畫面由像素構成。螢幕上的若干微小黑點和 / 或亮點（畫素）並不代表是故障的表示。

仍然存在，請將 “電影”的目前設定變更為其他設定（33 頁）。

• 檢查 1 或 2 插孔的連接情形，並檢查各個插孔是否牢牢地插在各自的插孔中。

Bravia KDL-52Z5500, KDL-40Z5500, KDL-46Z5500 Operating Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual