Page 1
MultiQuick 9
Stapled booklet, 148 x 210, 20 pages (incl. 8 pages cover), 1/1c = black – Print Spec J 92194885
Type 4200
Register your product
www.braunhousehold.com/register
Hand blender
Page 2
English 6
12
De’Longhi Braun Household GmbH
Carl-Ulrich-Straße 4
63263 Neu-Isenburg/Germany
5722112494/12.16 MQ 9087x CN
China/GB
Page 3
345
Page 4
Page 5
Page 6
6
Page 7
English
Our products are engineered to meet the highest
standards of quality, functionality and design. We
hope you thoroughly enjoy your new Braun
appliance.
Before use
Please read instructions carefully and
completely before using the appliance.
Caution
•
The blades are very sharp! To
avoid injuries, please handle
blades with utmost care.
•
Care shall be taken when handling
the sharp cutting blades, emptying
the bowl and during cleaning.
•
This appliance can be used by
persons with reduced physical,
sensory or mental capabilities or lack
of experience and knowledge if they
have been given supervision or
instruction concerning use of the
appliance in a safe way and if they
understand the hazards involved.
•
Children shall not play with the
appliance.
•
This appliance shall not be used by
children.
•
Children shall be kept away from the
appliance and its mains cord.
•
Cleaning and user maintenance shall
not be made by children without
supervision.
•
Always unplug or switch off the
appliance when it is left unattended
and before assembling, disassembling, cleaning and storing.
•
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
•
Before plugging into a socket, check
whether your voltage corresponds
with the voltage printed on the
bottom of the appliance.
•
This appliance is designed for
household use only and for
processing normal household
quantities.
•
Do not reach into the filling shaft
when the appliance is plugged in,
especially while the motor is running.
Always use the pusher to guide food
through the shaft.
•
Do not use any part in the microwave.
•
Cleaning of the appliance should
follow the instruction in the relevant
section.
Parts and Accessories
1 Pilot light
2 Safety button
3 Smart Speed switch / variable speeds
4 Motor part
5 EasyClick Release buttons
6 ActiveBlade shaft
7 Beaker
8 Whisk accessory
a Gearbox
b Whisk
9 Puree accessory
a Gearbox
b Puree shaft
c Paddle
10 350 ml chopper accessory «hc»
a Lid
b Chopping blade
c Chopper bowl
d Anti-slip rubber ring
11 1500 ml food processor accessory «fp»
a Lid (with gear)
b Coupling for motor part
c Pusher
d Feed tube
e Lid latch
f Food processor bowl
g Anti-slip rubber ring
h Chopping blade
i Kneading hook
j Insert holder
(i) Slicing insert (fine, coarse)
(ii) Shredding inserts (fine, coarse)
(iii) Julienne insert
k French fry disc
7
Page 8
Clean all parts before using for the first time
– refer to «Care and Cleaning».
Pilot Light
The pilot light (1) shows the status of the appliance,
when it is connected to an electrical outlet.
Pilot light Appliance / Operating status
Flashing red Appliance is ready for use.
Solid green Appliance is released (switch re-
Solid Red Early warning about overheating.
If the maximum speed decreases under high load
and long running time you can still finish your
preparation, however you should let the appliance
cool down afterwards.
lease button is pressed) and can
be switched on.
Motor slows down, step by step,
till shut off. Let the cool down. It
is ready for use again when the
pilot light fl ashes red.
How to Use the Appliance
Smart Speed Switch for
Variable Speeds
One squeeze, all speeds. The more you press, the
higher the speed. The higher the speed, the faster
and finer the blending and chopping results.
One handed operation: the Smart Speed switch (3)
allows you to turn on the appliance and control the
speed with one hand.
Operating your Hand Blender
First use: Remove the transportation lock from the
motor part (4) by pulling it at the red strap.
Switching On (A)
The appliance comes equipped with a safety button
for releasing the Smart Speed switch. To safely turn
it on, follow these points:
• Press the safety button (2) with your thumb. The
Pilot Light will turn solid green.
• Immediately press the Smart Speed switch and
adjust to the desired speed. Note: If the Smart
Speed switch is not pressed within 2 seconds,
the appliance cannot be switched on for safety
reasons. The pilot light will flash red. To switch
the appliance on, start again with first step.
• During operation you do not need to keep the
safety button pressed.
8
ActiveBlade Shaft (B)
The hand blender is equipped with an ActiveBlade
shaft, which enables the knife extend to the bottom
of the bell. The adjustment is made automatically by
pressure required in blending tasks, especially
suited to mix hard foods e.g raw fruits and
vegetables.
It is also perfectly suited for preparing dips, sauces,
salad dressings, soups, baby food, as well as
drinks, smoothies and milkshakes.
For best results, use the highest speed.
Assembly and Operation
• Attach the ActiveBlade shaft (6) to the motor part
until it clicks.
• Place the ActiveBlade shaft into the mixture to be
blended. Then switch the appliance on as
described above.
• Blend ingredients to the desired consistency
using a gentle up-and-down motion. Depending
on the pressure applied, the ActiveBlade shaft
will depress and blade will extend.
• After use, unplug the hand blender and press the
release buttons (5) to detach the ActiveBlade
shaft.
Caution
• For easier cleaning, liquids or ingredients should
not overlap the green line of the ActiveBlade
shaft.
• If using the appliance to purée hot food in a
saucepan or pot, remove the saucepan or pot
from the heat source and ensure the liquid is not
boiling. Allow hot food to cool slightly to avoid
risk of scalding.
• Do not let the hand blender sit in a hot pan on the
cooktop when not in use.
• Do not scratch the ActiveBlade Shaft over the
bottom of pans and pots.
Recipe Example: Mayonnaise
250 g oil (e.g. sunflower oil),
1 egg and 1 extra egg yolk,
1–2 tbsp. vinegar,
Salt and pepper to taste
• Place all ingredients (at room temperature) into
the beaker in the order as above.
• Place the hand blender at the bottom of the
beaker. Blend at maximum speed until the oil
starts emulsifying.
• With the hand blender still running, slowly raise
the shaft to the top of the mixture and back down
to incorporate the rest of the oil.
NOTE: Processing time: approx. 1 minute for
salads and up to 2 minutes for a thicker
mayonnaise (e.g. for dip).
Whisk Accessory (B)
Use the whisk only for whipping cream, beating egg
whites, making sponge cakes and ready-mix
desserts.
Page 9
Assembly and Operation
• Attach the whisk (8b) to the gearbox (8a).
• Align the motor part with the assembled whisk
attachment and push the pieces together until
they click.
• After use, unplug and press the release buttons
to detach the motor part. Then pull the whisk out
of the gearbox.
Tips for Best Results
• Move the whisk clockwise while holding it at a
slight incline.
• To prevent splattering, start slowly and use the
whisk attachment in deep containers or pans.
• Place the whisk in a bowl and only then switch
the appliance on.
• Always ensure the whisk and mixing bowl are
completely clean and free of fat before whisking
egg whites. Only whip up to 4 egg whites.
Recipe Example: Whipped Cream
400 ml chilled cream (min. 30% fat content, 4 - 8
°C)
• Start with low speed (light pressure on the
switch) and increase the speed (more pressure
on switch) while whipping.
• Always use fresh chilled cream to achieve greater
and more stable volume when whisking.
Puree Accessory (C)
The puree accessory can be used to mash cooked
vegetables and fruits such as potatoes, sweet
potatoes, tomatoes, plums and apples.
Before Use
• Do not mash hard or uncooked food, as this may
damage the unit.
• Peel and remove any stones or hard parts; cook
and drain then mash the fruit/vegetable.
Assembly and Operation
• Fit the gearbox (9a) to the shaft (9b) by turning in
a clockwise direction until it locks into place.
• Turn the puree accessory upside down and fit the
paddle (9c) over the central hub and turn
counter- clockwise to locate. (If the gearbox is
not fitted properly, then the paddle will not
secure in place).
• Align the assembled puree accessory with the
motor part and click the two parts together. Plug
in.
• Dip the puree accessory into the ingredients and
switch on the appliance.
• Using a gentle up and down motion, move the
puree accessory through the ingredients until the
desired texture is achieved.
• Release the Smart Speed switch and ensure the
puree accessory has completely stopped turning
before removing it from the food.
• After use, unplug the appliance. Remove the
paddle (9c) by turning clockwise.
• Press the release buttons to detach the puree
accessory from the motor part. Separate the
gearbox from the shaft by turning counterclockwise.
Caution
• Never use the puree accessory in a saucepan
over direct heat.
• Always remove the saucepan from the heat and
allow to cool slightly.
• Sit the saucepan or bowl on a stable, flat surface,
and support it with your free hand.
• Do not tap the puree accessory on the side of the
cooking vessel during or after use. Use a spatula
to scrape excess food away.
• For best results when mashing never fill a
saucepan or bowl more than half full with food.
• Do not process more than one batch without
interruption.
• Let the appliance cool down for 4 minutes before
you continue processing.
Recipe Example: Mashed Potatoes
• 1 kg cooked potatoes
• 200 ml warm milk
• Place the potatoes in a bowl and mash for 30
seconds (3/4 way on the Smart Speed switch)
• Add the milk. Resume mashing for another 30
seconds.
Chopper Accessory (D)
The chopper (10) is perfectly suited for chopping
meat, hard cheese, onions, herbs, garlic,
vegetables, bread, crackers and nuts.
Refer to the Processing Guide D for maximum
quantities, recommended times and speeds.
Maximum operation time for the «hc» chopper:
2 minutes for large amounts of wet ingredients,
30 seconds for dry or hard ingredients or amounts
< 100g. Immediately stop processing when motor
speed decreases and/or strong vibrations occur.
Before Use
• Pre-cut foods into small pieces for easier
chopping.
• Remove any bones, tendons and gristle from
meat to help prevent damage to the blades.
• Make sure the anti-slip rubber ring (10d) is
attached to the bottom of the chopper bowl.
Assembly and Operation
• Carefully remove the plastic cover from the
blade.
• The blade (10b) is very sharp! Always hold it by
the upper plastic part and handle it carefully.
• Place the blade on the center pin of the chopper
bowl (10c). Press it down and give it a turn so that
it locks into place.
9
Page 10
• Fill the chopper with food and put on the lid
(10a).
• Align the chopper with the motor part (4) and
click together.
• To operate the chopper, switch on the appliance.
During processing, hold the motor part with one
hand and the chopper bowl with the other.
• Always chop harder foods (e.g. parmesan
cheese) at full speed.
• When chopping is complete, unplug and press
the release buttons (5) to detach the motor part.
• Lift the lid up. Carefully take out the blade before
pouring out the contents of the bowl. To remove
the blade, slightly turn it then pull it off.
Caution
• Do not use the chopper accessory to process
extremely hard foods, such as unshelled nuts,
ice cubes, coffee beans, grains, or hard spices
e.g. nutmeg. Processing these foods could
damage the blades.
• Never place the chopper bowl in the microwave
oven.
Recipe example: Honey-Prunes (as a
pancake stuffing or spread):
50 g prunes
100 g creamy honey
• Fill the «hc» chopper bowl with prunes and
creamy honey.
• Store at 3°C in refrigerator for 24 hours.
• Chop 1,5 seconds at maximum speed (fully press
the Smart Speed switch).
Food Processor Accessory
The food processor accessory (11) can be used for:
• Chopping, blending and mixing light batter;
• kneading dough (based on max. 250 g flour);
• slicing, shredding, julienning, and making french
fries.
Chopping (E)
Using the blade (11h) you can chop meat, hard
cheese, onions, herbs, garlic, vegetables, bread,
crackers, and nuts.
Refer to the Processing Guide E for maximum
quantities, recommended times and speeds.
Before Use
• Pre-cut foods into small pieces for easier
chopping.
• Remove any bones, cartilage, tendons and
gristle from meat to help prevent damage to the
blades.
• Remove stems from herbs, shell nuts.
• Make sure the anti-slip rubber ring (11g) is
attached to the bottom of the food processor
bowl.
10
Assembly and Operation
• Carefully remove the plastic cover from the
blade.
• The blade (11h) is very sharp! Always hold it by
the upper plastic part and handle it carefully.
• Place the blade on the center pin of the bowl
(11f). Press it down and give it a turn so that it
locks into place.
• Fill the bowl with food. Attach the lid (11a) to the
bowl with the latch (11e) positioned to the right of
the bowl handle and align with marks.
• To lock the lid, turn it clockwise so that the latch
engages with a click.
• Insert the motor part (4) into the coupling (11b)
until it locks.
• Plug in the appliance and insert the pusher (11c)
in the feed tube (11d).
• To operate the food processor, switch on the
appliance. During processing, hold the motor
part with one hand and the food processor bowl
on the handle.
• When chopping is complete, unplug and press
the release buttons (5) to detach the motor part.
• Press the lid latch (11e) and hold it. Turn the lid
(11a) counter-clockwise to unlatch it.
• Lift the lid up. Carefully take out the blade before
pouring out the contents of the bowl. To remove
and unlock the blade, slightly turn it then pull it
off.
Caution
• Do not use the food processor accessory to
chop extremely hard foods, such as unshelled
nuts, ice cubes, coffee beans, grains or hard
spices e.g. nutmeg. Processing these foods
could damage the blades.
• Never place the food processor bowl in the
microwave oven.
Using the blade (11h), you may also mix light batter
like a pancake batter or a cake mixture based on up
to 250 g of flour.
Recipe Example: Pancake Batter
375 ml milk
250 g plain flour
2 eggs
• Pour milk into the bowl, then add flour and finally
the eggs.
• Using full speed, mix the batter until smooth.
Kneading Dough (E)
Figure E also applies for the use of the kneading
hook (11i). The kneading hook is ideal for kneading
different dough types such as yeast or pastry.
Assembly and Operation
• Place the kneading hook on the center pin of the
bowl (11f). Press it down and give it a turn so that
it locks into place.
• Fill the bowl with flour (max. 250 g), then add the
other ingredients except the liquids.
Page 11
• Turn the appliance on with ¾ way pressure on the
Smart Speed switch.
• Add liquids through the feed tube while the motor
is running.
NOTE: Maximum kneading time: 1 minute – then
allow the motor to cool down for 10 minutes.
Recipe Example: Pizza dough
250 g plain flour
½ tsp salt
½ tsp dried yeast
5 tbsp olive oil
150 ml water (lukewarm).
• Put all ingredients except water into the bowl and
start kneading.
• Add water through the feed tube wihle the motor
is running.
Recipe Example: Sweet Pastry
250 g plain flour
170 g unsalted butter (cold/hard, small pieces)
80 g sugar
1 vanilla sugar
1 small egg
1 pinch salt
• Put butter and sugar into the bowl and start
kneading. For good results use cold butter.
• Add flour and the rest of the ingredients.
• Dough will become too soft from over kneading.
Stop kneading shortly after dough has formed a
ball.
• Cool down the dough in the refrigerator for half
an hour before proceeding.
Slicing / Shredding / Julienne / French Fry (F)
Use the fine and coarse slicing inserts (i) to slice
raw fruit and vegetables into fine, thin slices; e.g.
cucumbers, onions, mushrooms, apples, carrots,
radishes, potatoes, zucchini and cabbage.
Use the fine and coarse shredding inserts (ii) to
shred foods such as apples, carrots, potatoes,
beetroot, cabbage, cheese (soft to medium).
Use the julienne insert (iii) to cut fruit and vegetable
into julienne.
Use the French fry disc (11k) to prepare french fries.
Refer to the Processing Guide F for recommended
speeds.
Assembly and Operation
• For slicing / shredding / julienning place an insert
into the insert holder (11j) and snap into position.
Place the assembled insert holder or French fry
disc on the center pin of the bowl and give it a
turn so that it locks into place.
• Attach the lid to the bowl with the latch
positioned to the right of the bowl handle.
• To lock the lid, turn it clockwise so that the latch
engages with a click.
• Insert the motor part into the coupling until it
locks.
• Plug in the appliance and insert the food to be
processed into the feed tube.
• For best French fry results, place 3-4 potatoes
(depending on the size) in the feed tube of the lid
while the motor is switched off.
• Switch the appliance on to operate. Never reach
into the feed tube when the appliance is switched
on. Always use the pusher to feed in food.
• After use, unplug and press the release buttons
to detach the motor body.
• Press the lid latch and hold it. Turn the lid
counter-clockwise to unlatch it.
• Lift the lid up. Carefully take out insert holder or
French fry disc before pouring out the contents
of the bowl. To remove the insert holder or
French fry disc, slightly turn it then pull it off.
• To remove an insert, push it up at the one end
that protrudes at the bottom side of the insert
holder.
Care and Cleaning (G)
• Always clean the hand blender thoroughly after
use.
• Unplug hand blender before cleaning.
• Do not immerse the motor part (4) or gearboxes
(8a, 9a) in water or any other liquid. Clean with a
damp cloth only.
• The lid (11a) can be rinsed under running water.
Do not immerse in water, nor place in a
dishwasher.
• All other parts can be cleaned in a dishwasher.
Do not use abrasive cleaners that could scratch
the surface.
• You may remove the anti-slip rubber rings from
the bottom of the bowls for an extra thorough
clean.
• When processing foods with high pigment
content (e.g. carrots), the accessories may
become discolored. Wipe these parts with
vegetable oil before cleaning them.
Both the design specifications and these user
instructions are subject to change without notice.
Please do not dispose of the product in the
household waste at the end of its useful life.
Disposal can take place at a Braun Service
Centre or at appropriate collection points
provided in your country.
Materials and accessories coming
into contact with food conform
to EEC regulation 1935/2004.
11
Page 12
12131415161718
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
19
Page 20
Loading...