Braun Flex Integral 6550 Use Instructions
Flex Integral
ultra
speed
3
Our products are designed to meet the highest
standards of quality, functionality and design.
We hope you entirely enjoy your new Braun
shaver.
Caution
• Do not use the shaver near, or over, basins filled
with water (e. g. bath tubs, showers etc.).
• For safety reasons, periodically check the cord for
damage and replace it, if it is loose in the shaver
socket.
1 Description
1
Foil protection cap
2
Triple shaving frame
3
Duo cutter block
4
Release button
5
Long hair trimmer
6
Switch
7
Switch lock
8
Function display
9
Shaver socket
2 Charging the shaver
• When charging the shaver for the first time,
connect it to the mains and charge it for at least
4 hours (switch position «0»). Then shave without
the cord until the red light on the function display
starts flashing
• Subsequent charges will take approximately
1 hour.
• Wattage: 6 Watts
Voltage range during charging: 12 - 240 V
Q
/
50 or 60 Hz (automatic adaption).
Best environmental temperature range for
charging: 15°C to 35°C
3 Function display
The function display shows the operation and
charging conditions of the shaver. It consists of the
LCD display, a green and a red light.
English
Loading...