Braun Flex Integral 6510, Flex Integral 6515, Flex Integral 6520 Use Instructions

Flex Integral

ultra

speed

3

Our products are designed to meet the highest
standards of quality, functionality and design.
We hope you entirely enjoy your new Braun
shaver.

Caution

• Do not use the shaver near, or over, basins filled
with water (e. g. bath tubs, showers etc.).

• For safety reasons, periodically check the cord for
damage and replace it, if it is loose in the shaver
socket.

1 Description

1

Foil protection cap

2

Triple shaving frame

3

Duo cutter block

4

Release button

5

Long hair trimmer

6

Switch

7

Switch lock

8

Low-charge light (red) (only 6520/6515)

9

Charging light (green)

j

Shaver socket

2 Charging the shaver

• When charging the shaver for the first time,
connect it to the mains and charge it for at least
4 hours (switch position «0»).
Then shave without the cord until the red low­charge light starts flashing.
(Modell 6510: Shave without the courd until the
shaver runs distinctly slower.)

• Subsequent charges will take approximately
1 hour.

• Wattage: 6 Watts
Voltage range during charging: 12 - 240 V

Q

/
50 or 60 Hz (automatic adaption).
Best environmental temperature range for
charging: 15°C to 35°C

English

Flex Integral 6515

Flex Integral 6510