Braeburn Systems 3-Zone Control Panel Operators Manual
3 Zone Panel 140303
Braeburn Zone
for Residential and Light
Commercial Applications
Braeburn Zone Control Panels feature the latest in
zone controls. Equipment and status are determined
at a glance with the monitoring LEDs built into the
panel. A supply air temperature sensor is included
with each panel to provide constant control.
Quick and Easy Installation
Braeburn zone panels are designed with the features customers demand: easy installation, at-aglance status, quick and reliable wiring terminals–
all in an attractive compact panel. Braeburn, your
best source for zoning.
Control Systems
Specifi cations
Panel Power 4 VA maximum (3.5 VA typical) for panel
System Power 4 VA (Zone Panel) + 1.0 VA per thermostat +
damper requirements, not to exceed 35 VA
Protection Electronic self resetting current limiting
Equipment Relay driven 2A at 24 VAC
Zone Damper Compatible with power open/power close, spring open/
Control power close and spring close/power open dampers
Indicators (28) Power OK, status, equipment Rh, Rc, Y1,
Y2, G, G2, W1/E/W3, W2/O-B; emergency heat,
thermostats 3X R, Y, G, W, dampers; closed or open
Switches Non HP/HP, dual fuel no/yes, reversing valve B active/O
active, fan control plenum/system, opposite mode call
timer 20/15, 2nd stage lockout none/active, priority
all/zone 1, second stage for 2 zones/2 stages.
Terminals Rh, Rc, Y1, Y2, G, G2, W1/E/W3, W2/O-B, C,
E-Heat, SA1, SA2 panel power (2) and R, Y, G, W, C,
PO, C, PC for each zone
Settings Large display for high temperature and low temperature
cut-out, purge status, supply temperature
Product Features and Benefi ts
• Sleek, low profi le design complements any system
• Suitable for residential and light commercial applications
• Can be used with conventional four or fi ve wire thermostats
• LEDs indicate panel functionality
• Quick connect terminals speed installation and reliability
• Compatible with electric, gas, oil and heat pump equipment
• Controls 3 heating and 2 cooling stages
• Controls 2 or 3 zones
• Emergency heat switch with remote terminals for total
heat pump control
• Fan purge into last calling zone for improved
energy effi ciency.
The
brighter
choice
®
Toll-Free 866.268.5599 (U.S.) +1.630.844.1968 (Outside the U.S.) www.braeburnonline.com
Braeburn Zone Control Systems
3 Zone Panel 140303, for Residential
and Light Commercial Applications
Architectural Specifi cations
The fully automatic zone panel shall be Braeburn model number 140303 8.00” high x 8.00” wide x 1.25” deep, powered from 24 Volts AC. In the
event of a power failure, the unit shall retain all confi guration settings. The zone panel shall be compatible with low voltage 4 or 5 wire mechanical
or electronic thermostats and be capable of controlling up to three stages of heating and two stages of cooling. Wiring blocks with terminals R, Y,
G, W, and C shall be included for three thermostat and one emergency heat position. Equipment terminals Rh, Rc, Y1, Y2, G, G2, W1/E/W3, W2/O-B,
and C shall be present along with three sets of damper terminals PO, C, and PC. Confi guration options shall be available for System Type- Heat
Pump / Non-Heat Pump, Dual Fuel- Yes / No, Reversing Valve- B Active / O Active, Fan Control- Plenum / System, Opposite Mode Timer- 20 / 15
minutes, 2nd stage Lockout- None / Active, Zone Priority- All / Zone 1, and Second Stage Fan- 2 Zones / 2 Stages. LED’s (Light Emitting Diodes) shall
be present to monitor Panel Power (1), Panel Processor (1), Emergency heat (1), HVAC equipment terminals (8), Four inputs for three thermostats
(12), and two outputs for three dampers (6). Provisions shall be available to display and adjust high and low temperature cut out and short cycle
protection override. The panel shall have an operating temperature of -30 to 50° C, and a storage temperature of -40 to 65° C with an operating
humidity range of 5 to 95% RH non-condensing.
Specifi cations
Power 24 VAC
Sensor Supply Air
Indicators 1 LED Display, 29 LED Indicators
Construction PC Board in High Impact Housing
Mounting Wall or Return Air Plenum Mount
Environmental Storage - 40˚ F to 150˚ F (-40˚ to 65˚ C)
Operating - 20˚ F to 125˚ F (-30˚ to 50˚ C)
The Braeburn Advantage
The Best Value in Zoning TodayTM
• Suitable for light commercial and
residential installation.
• Designed for years of trouble
free operation.
• Fully compatible with Braeburn and
other zoning system components.
Zone Panel Selection
Description Item No.
2 Zone 2H / 1C 140202
3 Zone 3H / 2C 140303
Braeburn Thermostats and Accessories
From our Premier Series to our economical Builder
Series, Braeburn has the products you need to lower
energy costs and increase comfort in any home or
business environment.
Call Us Toll-Free 866.268.5599 (U.S.)
+1.630.844.1968 (Outside the U.S.)
www.braeburnonline.com
©2008 Braeburn Systems LLC • 2215 Cornell Avenue • Montgomery, IL 60538 • All Rights Reserved • No. 140303-300-001
Loading...