Bradley Corporation 781-1824, 781-1830, 781-1836, 781-2430, 781-2436 User Manual
...
Mirror with roll-formed channel frame and theft-resistant mounting:
Standard Model 781-1824 (18" x 24") Bradex
Standard Model 781-1830 (18" x 30") Bradex
Standard Model 781-1836 (18" x 36") Bradex
Standard Model 781-2430 (24" x 30") Bradex
Standard Model 781-2436 (24" x 36") Bradex
®
®
®
®
®
Standard Model 781-24362 (24" x 36", tempered glass) Bradex
Standard Model 781-2460 (24" x 60") Bradex
®
Model 781-XXXX (Specify width and height)
Product Materials
FRAME: one-piece, roll-formed stainless steel with bright an nealed finish. Channel is ¾" x ¾" x
7
⁄16" with 90° mitered corners. Double strength continuous integral stiffener on all sides for added
strength.
BACK: galvanized steel.
MIRROR: first quality ¼" float glass, thermosetting infrared cured paint backing with Poly-Glaze
protective finish. Manufactured in accordance with ASTM C 1036 and ASTM C 1503. All edges
protected by shock-absorbing, neoprene tubing. The back of the mirror is protected by a sheet of ¼"
extruded polystyrene, which is placed between the mirror and the galvanized steel.
MOUNTING BRACKETS: 18 gauge cold rolled steel.
Optional Features
Features Suffix
¼" tempered glass mirror in lieu of polished float glass mirror* -2
Laminate glass -3
Highly polished No. 8 architectural finish, 20 gauge stainless steel in lieu of polished
float glass mirror
Bright annealed 20 gauge stainless steel in lieu of polished float glass mirror -5
* Either the Length (L) or the Width (W) must be greater than 25".
Plexiglas
®
An inherent characteristic of a manufacturing process for tempered glass is distortion
which may vary from mirror to mirror.
Stainless steel mirrors will differ in optic quality from glass mirrors.
In larger sizes, stainless mirrors are subject to distortion and/or "oil canning" for
which Bradley Corporation cannot accept responsibility.
Bradley mirrors are not field interchangeable from horizontal to vertical or vice versa.
Always specify width first.
-4
-6
Channel-Frame Mirror
®
Installation
Verify all rough-in dimensions prior to installation. Secure con cealed mounting
bracket to wall with screws (not included) at holes provided. Mounting
kits available through Bradley (ref. #899-026). For more information, visit
bradleycorp.com. Provide in-wall backing at mounting screw locations.
Position mirror over mounting bracket to engage hanger tabs. Slide mirror
down and lock into position.
Guide Specification
Mirror shall be framed with one-piece, roll-formed stainless steel with
¾" face and neatly mitered corners. Double -strength continuous integral
stiffener on all sides. Back of unit shall be galvanized steel. Separate brackets
for concealed mounting. Mirror shall be of first quality ¼" polished float
glass, guar an teed for 15 years against silver spoilage and protected by
shock-absorbing, neoprene tubing with Poly-Glaze protective finish.
Framed Mirror shall be Bradley Model
781-______" W x______" H (specify width and height).
ADA Compliant
Consult local and national accessibility codes for proper installation
guidelines.
Conformity and compliance to local and national codes is the
responsibility of the installer.
781
Orders composed of products indicated as Bradex®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.
Page 1 of 2 12/19/2012
This information is subject to change without notice.
Bradley_Mirror_781
P.O. Box 309, Menomonee Falls, WI 53052-0309
© 2014 Bradley
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
781
Channel-Frame Mirror
Dimensions
“H”
“W”
MIRRORS 30" WIDE AND UNDER MIRRORS OVER 30" WIDE
½
mirror
width
2¼"
(57mm)
2"
(51mm)
7⁵⁄₈"
(193mm)
Outer
edge of
mirror
Bradex® Models
Dim. "A"
to finished
floor
Width
(Inches)
W
18" 24" 18 x 24 457 x 610 781-1824
18" 30" 18 x 30 457 x 762 781-1830
18" 36" 18 x 36 457 x 914 781-1836
24" 30" 24 x 30 610 x 762 781-2430
24" 36" 24 x 36 610 x 914 781-2436
24" 36" 24 x 36 610 x 914 781-24362
24" 60" 24 x 60 610 x 1524 781-2460
36" 36" 36 x 36 914 x 914 781-3636
Model 781 series channel-framed mirrors can be fa bricated to fit
a maximum size of 120"W x 72"H.
Height
(Inches)
H
Overall
Dimension
(Inches)
7⁵⁄₈"
(193mm)
Overall
Dimensions
(Millimeters)
2¼"
(57mm)
Outer
edge of
mirror
2"
(51mm)
Standard
Model
Number
Dim. "A" Key Surface:
Mirror's bottom edge of
the reflecting surface to
finished floor
Rough wall opening:
Orders composed of products indicated as Bradex®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.
Page 2 of 2 12/19/2012
This information is subject to change without notice.
Bradley_Mirror_781
For Dim. "A" Bottom of Unit
40" (1016mm) 39¼" (997mm)
37" (940mm) 36¼" (921mm)
34" (864mm) 33¼" (845mm)
Surface Mount: No rough wall opening, see overall dimensions
© 2014 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
Loading...