Bradley Corporation 6562 User Manual

6562

Soap Dispenser

Tank Type Vertical Bradex

®

Surface-Mounted
ADA Compliant

Product Materials

BODY: 20 gauge stainless steel with exposed surfaces in architectural satin finish.
BACK: 20 gauge stainless steel; heliarc welded to the body.
WALL PLATE: stainless steel.
SOAP VALVE: chrome-plated brass housing with ABS plastic mechanism.

Capacity

40-oz. liquid soap.

Operation

Push-in valve dispenses measured amount of vegetable or coconut oil liquid soaps,
synthetic detergents, and antiseptic solutions with less than 5 lbs. of force. Sight
gauge indicates refill time. Locked filler top opens with special key provided.

Bradley liquid soap valves operate best with any vegetable oil or coconut oil hand
soap having a 10−15% soap concentration.

Installation

Verify all rough-in dimensions prior to installation. Secure separate mounting
bracket to wall. Slide dispenser into place and secure locking screw through filler
hole.

Guide Specification

Surface-mounted liquid soap dispenser shall be fabricated of 20 gauge satin finish
stainless steel. Dispenser shall have completely concealed mounting, vandal­resistant filler hole cover and sight gauge. Push-in corrosion-resistant liquid soap
valve. Capacity: 40-oz. liquid soap. Requires less than 5 lbs. of force to dispense
soap.

Overall dimensions: 4

13

⁄16"W x 83⁄16"H x 27⁄8"D.

ADA Compliant

Consult local and national accessibility codes for proper
installation guidelines.

Conformity and compliance to local and national codes is
the responsibility of the installer.

Orders composed of products indicated as Bradex®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.

Page 1 of 2 2/28/2011
This information is subject to change without notice.
Bradley_SoapDispenser_6562

P.O. Box 309, Menomonee Falls, WI 53052-0309

© 2014 Bradley

800 BRADLEY (800 272 3539) [phone]

bradleycorp.com

Dimensions

6562

Soap Dispenser

8³⁄₁₆"

(208mm)

5³⁄₈"

(137mm)

4¹³⁄₁₆"

(122mm)

2⁷⁄₈"

(73mm)

Dim. "A"

to finished

floor

Dim. "A" Key Surface: For Dim. "A" Top of Unit Bottom of Unit

Push button top to
finished floor

Rough wall opening:

Surface Mount:

Orders composed of products indicated as Bradex®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.

Page 2 of 2 2/28/2011
This information is subject to change without notice.
Bradley_SoapDispenser_6562

40" (1016mm) 46¾" (1187mm) 38½" (978mm)

38" (965mm) 44¾" (1137mm) 36½" (927mm)

36" (914mm) 42¾" (1086mm) 34½" (876mm)

34" (864mm) 40¾" (1035mm) 32½" (826mm)

No rough wall opening, see overall dimensions

© 2014 Bradley

P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) [phone]

bradleycorp.com