Bradley Corporation 6334 User Manual

Model 6334

Lavatory-Mounted
Pump-Type Valve
3½" Spout
ADA Compliant
For Use on Lav Decks With a Minimum ½" Thickness

Product Materials

PLUNGER AND FLANGE ASSEMBLIES: heavy chrome-plated brass.
SHANK: molded ABS plastic.
PUMP ASSEMBLY: molded clear ABS plastic.
VALVE COMPONENTS: Celcon, Buna-N rubber or stainless steel.
SOAP BOTTLE: translucent polyethylene. 16 oz. capacity.

Operation

Depress piston for measured amount of liquid soap. Fills from top by
unlocking and withdrawing piston and spout assembly using special key
provided. The 6334 will dispense vegetable or coconut oil liquid soaps,
synthetic detergents, and antiseptic solutions in a liquid form. Spout is fixed.

Bradley liquid soap valves operate best with any vegetable oil or coconut oil
hand soap having a 10−15% soap concentration.

6334

Lavatory-Mounted Soap Dispenser

3½"

(89mm)

Installation

Mount dispenser in 1¼" diameter hole in lavatory or countertop. Include
dispenser mounting hole location in lavatory specifications or mount in
unused faucet hole.

Guide Specification

Lavatory-mounted liquid soap dispenser manufactured of chrome-plated
brass and molded ABS plastic. Valve shall dispense measured amount of
vegetable or coconut oil liquid soap, synthetic detergents, or antiseptic
solutions. Servicing is fa cil i tat ed by use of special wrench.

ADA Compliant

Consult local and national accessibility codes for proper
installation guidelines.

Conformity and compliance to local and national codes is
the responsibility of the installer.

17⁄8"

(48mm)

3

⁄8"

2

(60mm)

5

⁄8"

2

(67mm)

½" (13mm)

Minimum Deck

Thickness

9¼"

(235mm)

Page 1 of 1 2/9/2011
This information is subject to change without notice.
Bradley_SoapDispenser_6334

P.O. Box 309, Menomonee Falls, WI 53052-0309

© 2014 Bradley

800 BRADLEY (800 272 3539) [phone]

bradleycorp.com