Bradley Corporation 2902-2800, 2902-2873, 2902-2874 User Manual

Adjustable Motor, Adjustable Sensor-Operated Warm Air Hand Dryer

Recommended for very high traffic areas.

Standard Model 2902-280000 (cast iron white

®

ex

porcelain) Brad

Standard Model 2902-287300 (steel-white epoxy)

®

ex

Brad

Standard Model 2902-287400 (stainless steel-satin

®

finish) Brad

ex

Product Materials

2902-2800 COVER:

enamel coating.

2902-2873 COVER:
2902-2874 COVER:

Cover fixed to the base plate with two vandal-proof lock screws and lock with
special key wrench.

ADJUSTABLE MOTOR: universal-type with high-speed, universal brush, fully
adjustable (3,800–8,200 RPM) potentiometer, Class A; Aluminium centrifugal
double asymmetrical inlet fan wheel; aluminum scroll fan and safety thermal cut-off.

HEATING ELEMENT: waved wire NiCr heating element mounted on a mica frame
that incorporates a self-resetting thermal cut-off at 302ºF.

ADJUSTABLE SENSOR OPERATION: electronic infrared detection sensor with
fully adjustable (2"–8") potentiometer. Includes polycarbonate viewing windows.
Automatic shut-off after 60 seconds.

BASE PLATE:

mounting. Includes silent blocking to dampen mechanical vibrations.

3

⁄16" (4.5 mm) thick one-piece cast iron; white porcelain

1

⁄16" (1.5mm) thick one-piece steel; white epoxy finish.

1

⁄16" (1.5mm) thick one-piece stainless steel; satin finish.

1

⁄8" (3 mm) thick aluminum, with four Ø 5⁄16" (8 mm) holes for wall

Installation

Verify all rough-in dimensions prior to installation. Hand dryers require a
dedicated circuit and must be properly grounded. GFI Circuit protection is
recommended. One side of dryer should be mounted to a stud.

Operation

Place hands 3"–6" below nozzle to activate air flow. Dryer will
stop two seconds after hands are removed from air flow.

ADA Compliant

Consult local and national accessibility codes for proper
installation guidelines.

Conformity and compliance to local and national codes is
the responsibilty of the installer.

Orders composed of products indicated as Bradex®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.

Page 1 of 2 1/6/2014
This information is subject to change without notice.
Bradley_HandDryer_2902-2800_2873_2874

Product Specifications

Voltage: 100–120 V, 208 V, 220−240 V Consumption: 9.5–4.8 A

Motor:

Nominal power: 1,150 W (1.54 Hp) Heating element: 900 W (1.20 Hp)

Effective airflow: 36–58 CFM Nominal airflow: 43–70 CFM

Noise level at 79": 64–70 dB Airspeed: 4,920–9,840 LFM

Frequency: 50/60 Hz Insulation: Grounding required

Temperature (at 4"
distance / 70ºF): 106ºF–111ºF (41ºC–44ºC)

Drying time: 12–15 seconds Mounting: Surface. ADA-compliant

Protection level: IP23 Splash Protection

2902-2800, 2902-2873, 2902-2874

®

Guide Specification

Surface-mounted ADA-compliant hand dryer shall have a thick cast iron cover
with white porcelain enamel coating (2902-2800) or steel cover with white epoxy
coating (2902-2873) or stainless steel cover with satin finish (2902-2874). Hand
dryer shall include aluminium base plate, fully adjustable (2"– 8") infrared sensor
potentiometer and fully adjustable (3800 - 8200 RPM) universal-type motor
potentiometer with resilient mounts and sealed, lubricated ball bearings. Dryer
shall operate at 64−70 dB while delivering 43−70 CFM of air at 106ºF–111ºF
(41ºC−44ºC) and 4,920−9,840 LFM velocity during user-controlled drying cycle.
Dryer shall have a total power of 800–1,150 W (1.07–1.54 Hp) with a consumption
of 9.5–4.8 A.

Overall dimensions: 10½"H x 11½"W x 4"D (267mm x 292mm x
102mm).

Weight: 7.9 lb (3.58 kg)

1

⁄3 HP (250 W)

RPM: 3,800–8,200

Certificates: UL 499 / CSA C22.2 /

VDE GS / VDE EMC

© 2014 Bradley

P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) [phone]

bradleycorp.com

Dimensions

4"

(102mm)

11-5/8"

(295mm)

2902-2800, 2902-2873, 2902-2874

Adjustable Motor, Adjustable Sensor-Operated Warm Air Hand Dryer

9¼"

(235mm)

9¼"

(235mm)

Dim. "A"

to finished

floor

Surface-mounted electrical

knockout located in lower

left corner of cover

4"

(102mm)

Surface-mounted electrical

knockout located in lower

left corner of cover

Model 2902-280000

11½"

(292mm)

9¼"

(235mm)

Models 2902-287300

and 2902-287400

7¾"

(197mm)

7¾"

(197mm)

10-5/8"

(270mm)

10½"

(267mm)

All dimensions ± 4%.

7¾"

(197mm)

4½"

(114mm)

Dim. "A" Key Surface: For Dim. "A" Top of Unit Bottom of Unit

Sensor top to finished

48" (1219mm) 57¾" (1467mm)

47¹⁄₈" (1197mm)

floor

45" (1143mm) 54¾" (1391mm)

44¹⁄₈" (1121mm)

Ø ¼"

(7mm)

Ø 1"

(25mm)

Mounting Template Front View

Rough wall opening:

Surface Mount:

Orders composed of products indicated as Bradex®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.

Page 2 of 2 1/6/2014
This information is subject to change without notice.
Bradley_HandDryer_2902-2800_2873_2874

42" (1067mm) 51¾" (1314mm)

40" (1016mm) 49¾" (1264mm)

No rough opening, see overall dimensions

41¹⁄₈" (1045mm)

39¹⁄₈" (994mm)

© 2014 Bradley

P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) [phone]

bradleycorp.com