Bradley Corporation 269-1444 User Manual
Eye and Eye/Face Wash Pattern Test Gauge
21
•
Transparent Compliance Gauge Facilitates Weekly Inspection
•
Testing Instructions Printed on Test Gauge
•
Integral 8" (21cm) Scale Assists in Evaluation of Spray Pattern Height
•
Spray Pattern Focal Points Easy to Align
•
Illustration Compliant With American National Standard Z358.1-2009
Specifications
Clear plastic 8" (21cm) ruler stamped with black text instructs how to test
the eye or eye/face wash system. Text refers to ANSI Z358.1-2009 testing
protocols to ensure that the emergency system complies with the standard’s
recommendations and is fully functional as intended by the manufacturer.
Model Description
269-1444
Gauge - detailed view
Eye and Eye/Face Wash Pattern Test Gauge
269-1444
I
NCHES
Maximum height from the top of each
sprayhead to the crest of each eyewash
stream cannot exceed 20.32 cm (8 inches).
Align gauge over eyewash stream until
fluid stream meets circles on gauge. Fluid
stream should fill area between dotted
lines. Ref. ANSI Z358.1.
METRIC
12345610789
Gauge - in use (ANSI/ISEA Z358.1-2009)
4
8.26 cm
(3¼")
3.18 cm
(1¼")
11 12 13 1514
65321
EYEWASH
TESTER GAUGE
R
EORDER NO
16 17 18 19 20
20.3 cm (8")
maximum from
the top of the
sprayhead(s)
87
. 269-1444
Page 1 of 1 11/11/10
This information is subject to change without notice.
Bradley_EyeFaceWash_269-1444
top of sprayhead(s)
© 2015 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) +1 262 251 6000
bradleycorp.com
Loading...