Bradley Corp WBD1-0008, WBD1-0006, WBD1-0004, WBD1-0005, WBD1-0002 User Manual

Installation

WBD1

WashBar™ Duo

Table of Contents

Safety Information .............................................................2

Supplies Required .............................................................2

Components ...................................................................3-4

Dimensions .....................................................................5-8

Structural Rough-Ins ..........................................................9

Plumbing and Electrical Rough-Ins ................................. 10

WashBar Installation ........................................................11

Aerator Installation ........................................................... 11

Attach Soap Motor and Soap Container Bracket ............12

Control Box and Valve Installation ............................. 13-14

Soap Installation .............................................................. 15

Electrical Connections ..................................................... 16

Adjust Temperature with Water Running ......................... 16

Master Control Box .....................................................17-21

Cleaning and Maintenance .........................................22-23

215-1890 Rev. D; ECO 19-08-012
© 2019 Bradley
Page 1 of 23 7/21/2019

Menomonee Falls, WI 53052 USA

P.O. Box 309

800 BRADLEY (800 272 3539)

[phone]

bradleycorp.com

WBD1 Installation

WARNING

Make sure that all water supply lines have been flushed and then completely turned off before beginning
installation. Debris in supply lines can cause valves to malfunction.

Turn OFF electrical power to the electrical outlets, then unplug all electrical units prior to installation. Electrical
power MUST remain off until installation is complete.

Installer's hardware must be appropriate for wall construction. Wall anchors must have a minimum pull-out
rating of 1,000 pounds.

IMPORTANT

Read this entire installation manual to ensure proper installation. When finished with the installation, file this
manual with the owner or maintenance department. Compliance and conformity to local codes and ordinances
is the responsibility of the installer. Product warranties may be found under “Products” on our Web site at
www.bradleycorp.com.

Separate parts from packaging and make sure all parts are accounted for before discarding any packaging
material. If any parts are missing, do not begin installation until you obtain the missing parts.

For standard height mounting, do not exceed the recommended 33.5" distance from the fixture rim to the
finished floor.

Troubleshooting and internal maintenance must be performed by qualified service personnel.

Supplies Required

• (4) #10 fasteners and wall anchors for soap tank brackets (minimum pull-out rating of 100 lbs.)

• 1/2" hot/cold or tempered stub-out

• (1) Dedicated 120V ac, 20A GFCI outlet

• Drill

• Basin Wrench

• Tape Measure

• Phillips Screw Driver

• Flat Head Screw Driver

• 5/16" nut driver

• 5/16" socket (with or without extension)

2 7/21/2019 Bradley • 215-1890 Rev. D; ECO 19-08-012

Installation WBD1

Components

Master Control Box

(S39-845)

#10 x 3/8" Screw (2x)

(P18-054)

DC Lead Free Valve

Assembly, Single TMA

(S08-2401TMA)

Hose/90 Stop Lead Free TMA

(S45-2730)

DC Power

Adapter

(261-147)

DC Lead Free Valve

Assembly, Single TL

(S08-2401TL)

Hose/90 Stop Lead Free TL

(S45-2731)

Bradley • 215-1890 Rev. D; ECO 19-08-012 7/21/2019 3

WBD1 Installation

Components

Soap Tube

.20mm OD x 27cm long

(269-2684)

Kit Screws, WBD1

Access Plate (S65-494)

Elbow, 1/4 x 3.4mm

Hose Barb (145-221)

Gasket, WashBar Deck,

Soap Side (124-101)

Union Tube, 1/4" OD

(269-624)

Access Plate and

Hardware Kit (S04-124)

Aerator .50 GPM (S05-175)
Aerator .35 GPM (S05-215)
(Aerators are shipped loose
in bag with red service key)

Casting ASM. WashBar

(WBD1), Chrome w/ LED

(S05-217F01)

Gasket, WashBar Deck,

Faucet Side (124-102)

Union Tube,

1/4" OD x 12"

(269-547E)

WashBar Ground .25"

QC (230-035)

Nut, WashBar,

1-3/8-18

(110-256)

Shank WashBar,

1-3/8" OD
(109-055)

Union Elbow, 1/4"

(269-2531)

Control Box Assembly with

Liquid Pump (S52-166)

Control Box Assembly with

Foam Pump (S52-167)

Liquid Pump with External

Rubber Sleeve Connection

(269-2518)

Foam Pump with Internal

Press Fit Connection

(269-2519)

Gallon Jug

(Supplied by Others)

Hook and Loop Strap

(269-2574)

Grounding Kit, WashBar

(S65-493)

Ground Wire Asembly

1/4" Quick Type B Outlet

(S83-423)

Grounding Washer
1/4" QC (230-035)

Soap Tank Bracket

(140-1171)

4 7/21/2019 Bradley • 215-1890 Rev. D; ECO 19-08-012

Installation WBD1

Dimensions - Customer Supplied Countertop with WBD1

ø 1-7/16" (37)

Top View

1-Station shown. Other
configurations are similar.

8" Set"

(203)

Thru Deck (2) Places

(mm)

2-1/2"

(64)

Front View

Soap

10-1/2"

(267)

7-1/8"

(181)

Water

Side View

Lav Deck By Others

3"

(76)

4"

(102)

Bradley • 215-1890 Rev. D; ECO 19-08-012 7/21/2019 5

WBD1 Installation

Dimensions - Verge® LVA-Series with WBD1

Top View

1-Station shown. Other
configurations are similar.

5"

(127)

8" Set

(203)

(mm)

2-3/4"

(70)

Lav Centerline

Front View

Soap

7-1/8"

(181)

10-1/2"

(267)

Side View

4-1/8"

(105)

Water

6-3/8"

(160)

6 7/21/2019 Bradley • 215-1890 Rev. D; ECO 19-08-012

Installation WBD1

Dimensions - Verge LVA-Series with WBD1

Side View with Soap

4-1/4"

(107)

6-1/4"

(158)

13-1/2"

(343)

7"

(178)

Bradley • 215-1890 Rev. D; ECO 19-08-012 7/21/2019 7