Bradley ICN-001 Datasheet

MODEL ICN-001-GREY

Option:

ICN-001-LGREY (Light Grey)

customised excellence

www.bradleyaustralia.com

SURFACE MOUNTED BABY CHANGE STATION ICN-001-GREY Page 1

PRODUCT FEATURES:

- High density polyethylene

- Surface mounted with concealed installation

- One handed opening and closing operation

- Easy to use and hygienic

Overall Dimensions
Closed: 855mm W x 560mm H x 107mm D
Open: 855mm W x 560mm H x 495mm D

PRODUCT DATA:

CONSTRUCTION:

OUTER CASE: Fabricated of high density polyethylene. Foldable design
provides space optimisation. Designed for concealed installation, achieving
the integration of the aesthetic effect with the wall.
BODY: Antibacterial high density polyethylene. With reinforced metal
plate on the back making it firm, safe and reliable.
MOULDED LINER DISPENSER: For storage of disposable liners.
SAFETY BELT: With adjustable restraint to better protect baby when in use.
HANDLES: To hold clothes or carry bags to keep them off the floor.

OPERATION

Hinge system design, closing the table when not in use,
allowing more efficient and rational use of space. Hinge
bracket with metal design provides high strength and
stability. The high quality gas spring design allows a one
handed opening and closing operation. Designed for
infants only up to 3 years and weighing less than 20kg.

METHOD OF USAGE

1. Unfold unit as shown on right

2. Take liner from paper holder and lay it on the table

3. Lay child in the centre of the changing table and clip
together the ends of the restraint belt

4. After use, throw the liner into the trash and close
the table.

Unit folds up

107mm

495mm

560mm

INSTALLATION:

For complete installation instructions, see page 2 of this
data sheet.

GUIDE SPECIFICATION:

Surface mounted unit shall be fabricated of antibacterial high
density polyethylene with a reinforced metal back plate and
with a sanitary disposable liner holder.

TOLL FREE 1300 364 561

560mm

855mm

The manufacturer reserves the right to make changes in design and

material without formal notice and without incurring obligation.

MODEL ICN-001-GREY

Option:

ICN-001-LGREY (Light Grey)

customised excellence

www.bradleyaustralia.com

SURFACE MOUNTED BABY CHANGE STATION ICN-001-GREY Page 2

METHOD OF INSTALLATION:

1. Hooks

2. Mounting holes

3. Paper holder

4. Restraint belt

5. Table

6. 120mm Screws

7. 100mm Screws

8. Screw Caps (Up)

9. Screw Caps (Down)

855mm

560mm

1250mm

TOLL FREE 1300 364 561

The manufacturer reserves the right to make changes in design and

material without formal notice and without incurring obligation.