Bradley 9574 Datasheet

TECHNICAL DATA SHEET

SURFACE MOUNTED BACKREST

BACKREST 9574

- Ergonomically designed white
polyurethane, padded, water­ proof cushion 40mm thick

- 32mm diameter satin finish
stainless steel tubing

- Concealed fixing

- Easy to install on most
building surfaces

Overall Dimensions
600mm W x 164mm H
with adjustable depth

CONSTRUCTION:

FLANGES: Fabricated of type 304 stainless steel.

ESCUTCHEONS: Fabricated of type 304 stainless steel. One-piece drawn

construction with exposed surfaces in architectural satin finish. Snap over

flanges to conceal mounting screws.

TUBING: Fabricated of type 304 stainless steel, seamless construction with

exposed surfaces in architectural satin finish. Bent ends of tubing pass

through the flanges and are heliarc welded into a single structural unit for

maximum strength. Intermediate supports are contour cut and joined by

heliarc welding to form an integral part of the tubing. All welds ground and

polished to blend. Mandrel bending process maintains uniform

tubing diameter.

MODEL 9574

364

164

565±1

STRENGTH:

When properly mounted, all Bradley heavy duty systems meet or exceed the

requirements of Australian Standard AS1428.1(2,3), of ANSI Standard A117.1,

the ADA and ABA Accessibility Guidelines for Buildings and Facilities (ADAAG)

and the Uniform Federal Accessibility Standard (UFAS).

INSTALLATION:

Secure to wall where adequate in-wall backing exists. Use escutcheons as a

template to locate mounting holes. Drill holes and set anchors as appropriate.

Mount backrest and secure mounting screws. Snap escutcheons into place.

GUIDE SPECIFICATION:

Unit shall be fabricated of type 304 satin finish stainless steel with

concealed mounting flanges in sizes and configurations as indicated.

Padded white polyurethane backrest.

TOLL FREE 1300 364 561

The manufacturer reserves the right to make changes in design and material

without formal notice and without incurring obligation.

391

444.1

82°

40

±1.5°

156