Bradley 9573 Datasheet
TECHNICAL DATA SHEET
SURFACE MOUNTED BACKREST
BACKREST 9573
- Black vinyl padded back
- Concealed fixing
- 32mm diameter
stainless steel tubing
CONSTRUCTION:
FLANGES: Fabricated of type 304 (18-8), 80mm dia. 13 gauge stainless steel.
ESCUTCHEONS: Fabricated of type 304 (18-8), 22 gauge stainless steel.
One-piece drawn construction with exposed surfaces in architectural
satin finish. Snap over flanges to conceal mounting screws.
TUBING: Fabricated of type 304 (18-8), 32mm (1-1/4") O.D.
18 gauge stainless steel, seamless construction with exposed surfaces
in architectural satin finish. Bent ends of tubing pass through the
flanges and are heliarc welded into a single structural unit for
maximum strength. Intermediate supports are contour cut and
joined by heliarc welding to form an integral part of the tubing.
All welds ground and polished to blend. Mandrel bending process
maintains uniform tubing diameter.
250mm
MODEL 9573
32mm
368.3mm
350mm
406.4mm
o
85
300mm
STRENGTH:
When properly mounted, all Bradley heavy duty systems meet
or exceed the requirements of Australian Standard AS1428.1(2,3),
of ANSI Standard A117.1, the ADA and ABA Accessibility Guidelines
for Buildings and Facilities (ADAAG) and the Uniform Federal
Accessibility Standard (UFAS).
INSTALLATION:
Secure to wall where adequate in-wall backing exists.
Use escutcheons as template to locate mounting holes.
Drill holes and set anchors as appropriate. Mount backrest
and secure mounting screws. Snap escutcheons into place.
GUIDE SPECIFICATION:
Unit shall be fabricated of type 304 satin finish stainless
steel with concealed mounting flanges in sizes and con-
figurations as indicated. Black padded vinyl backrest.
TOLL FREE 1300 364 561
The manufacturer reserves the right to make changes in design and material
without formal notice and without incurring obligation.
117.6mm 117.6mm
16mm
83mm
CONCEALED
*50mm wall clearance required
under most building design codes
*50mm
203mm
180mm
368.3mm
Loading...