Bradley 832-102 Datasheet

TECHNICAL DATA SHEET

SURFACE MOUNTED DROP DOWN GRAB BAR

DROP DOWN GRAB BAR RAIL 832-102
WITH LOCKING PIN

- Satin finish stainless steel

- Locks in the ‘up’ position

Back Plate Dimensions
100mm W x 300mm H - Unit Projects 800mm

CONSTRUCTION:

TUBING: Fabricated of type 304 (18-8), 32mm (1-1/4") O.D.

18 gauge stainless steel, seamless construction with exposed

surfaces in architectural satin finish. Bent ends of tubing pass

through the flanges and are heliarc welded into a single

structural unit for maximum strength. Intermediate supports

are contour cut and joined by heliarc welding to form an

integral part of the grab bar. All welds ground and polished

to blend. Mandrel bending process maintains uniform

bar diameter.

6-Ø10.0

STRENGTH:

When properly mounted, all Bradley heavy duty grab

bar systems meet or exceed the requirements of

Australian Standard AS1428.1(2,3), of ANSI Standard A117.1,

the ADA and ABA Accessibility Guidelines for Buildings and

Facilities (ADAAG) and the Uniform Federal Accessibility

Standard (UFAS).

85mm

60mm

Ø8mm

R150mm

100mm

MODEL 832-102

-2 Peened (Safety Grip)

-51 with Toilet Roll Holder

-NC with Nurse Call Button

800mm±3

130mm±2

8mm

Details of Locking Mechanism

10mm

9mm9mm

120mm

300mm

250mm

120mm

10mm

100mm

Options:

Ø31.80±0.15

INSTALLATION:

Secure to wall where adequate in-wall backing exists.

Use bar as template to locate mounting holes. Drill holes

and set anchors as appropriate. Mount grab rail and secure

mounting screws.

300mm

GUIDE SPECIFICATION:

Grab bar shall be fabricated of type 304 satin finish stainless steel

with concealed mounting flanges in sizes and configurations as indicated.

TOLL FREE 1300 364 561

The manufacturer reserves the right to make changes in design and material

without formal notice and without incurring obligation.