Bradley 2903-28, 2904-28 Service Manual

Service Manual for

2903-28 / 2904-28

How to Remove the Cover

Cover Specification

Cast Iron – White Porcelain

• 2903-28, Sensor Activation
(replacement P/N: P15-420)

• 2904-28, Push Button Activation
(replacement P/N: P15-421)

Reminder!

Disconnect power to the unit before

removing the cover

Removing the Cover:

Step 1: Unscrew the two lock
screws with the security
wrench provided.

(Part # P15-419)

Step 2: Remove the cover taking
care to avoid damaging the cover
or internal components.

!

Caution: For Automatic Dryers

Be sure to disconnect the sensor cord

connecting the cover to the base before removing!

Service Manual for

2903-28 / 2904-28

How to Remove the Heating Element

Heating Element Specification

• Undulated heating element

• Material: Winding in NICROM; Body in MICA

• Automatic resetting circuit breaker protects
against overheating.

Replacement Part Numbers: P15-424 for UL Models

P15-425 for CE Models

Reminder!

Disconnect power to the unit before

removing the cover

Removing the Heating Element:

Step 1: Unscrew the three
screws which connect the
two halves of the scroll.

Step 2: Separate both
parts of the scroll so that
you can work inside.

A: Push-button version

Step 1: Disconnect the cable
from the electrical connection.

One cable of the heating element is
connected to the electrical connection,
and the other one to the timer.

Step 2: Disconnect the cable
from the timer.

B: Automatic version

Step 1: Remove the circuit
board from the base plate.

Both cables of the heating element are
connected to the circuit board.

Step 2: Disconnect the
two white cables from
the terminal block.

Both versions

To replace the heating element, take the new one and

follow the above steps in reverse.

Step 3: Remove the heating element.

Service Manual for

2903-28 / 2904-28

How to Remove the Motor Fuse