Bradley 2902-2800, 2902-2873, 2902-2874, 2902-2878, 2902-280000 Bradex User Manual

2902-2800, 2902-2873, 2902-2874, 2902-2878

Adjustable Motor, Adjustable Sensor-Operated Warm Air Hand Dryer

Recommended for very high traffic areas.

Standard Model 2902-280000 (cast iron white

porcelain) Bradex®

Standard Model 2902-287300 (steel-white epoxy)

Bradex

Standard Model 2902-287400 (stainless steel-satin

finish) Bradex

Standard Model 2902-287800 (stainless steel-bright

polished finish)

Product Materials

2902-2800 COVER:

enamel coating.

2902-2873 COVER:
2902-2874 COVER:
2902-2878 COVER:

finish.
Cover fixed to the base plate with two vandal-proof lock screws and lock with

special key wrench.
ADJUSTABLE MOTOR: universal-type with high-speed, universal brush, fully

adjustable (3,800–8,200 RPM) potentiometer, Class A; Aluminium centrifugal
double asymmetrical inlet fan wheel; aluminum scroll fan and safety thermal cut-off.

HEATING ELEMENT: waved wire NiCr heating element mounted on a mica frame
that incorporates a self-resetting thermal cut-off at 302ºF.

ADJUSTABLE SENSOR OPERATION: electronic infrared detection sensor with
fully adjustable (2"–8") potentiometer. Includes polycarbonate viewing windows.
Automatic shut-off after 60 seconds.

BASE PLATE:

mounting. Includes silent blocking to dampen mechanical vibrations.

Installation

Verify all rough-in dimensions prior to installation. Hand dryers
require a dedicated circuit and must be properly grounded. GFI
Circuit protection is recommended. One side of dryer should be
mounted to a stud.

Operation

Place hands 3"–6" below nozzle to activate air flow. Dryer will
stop two seconds after hands are removed from air flow.

ADA Compliant

Consult local and national accessibility codes for proper
installation guidelines.

Conformity and compliance to local and national codes is
the responsibilty of the installer.

Orders composed of products indicated as Bradex®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.

Page 1 of 2 9/20/2017
This information is subject to change without notice.
Bradley_HandDryer_2902-2800_2873_2874

®

®

3

⁄16" (4.5 mm) thick one-piece cast iron; white porcelain

1

⁄16" (1.5mm) thick one-piece steel; white epoxy finish.

1

⁄16" (1.5mm) thick one-piece stainless steel; satin finish.

1

⁄16" (1.5mm) thick one-piece stainless steel; bright polished

1

⁄8" (3 mm) thick aluminum, with four Ø 5⁄16" (8 mm) holes for wall

Product Specifications

Voltage: 100–120 V, 208 V, 220−240 V Consumption: 9.5–4.8 A

Motor:

Nominal power: 1,150 W (1.54 Hp) Heating element: 900 W (1.20 Hp)

Effective airflow: 36–58 CFM Nominal airflow: 43–70 CFM

Noise level at 79": 64–70 dB Airspeed: 4,920–9,840 LFM

Frequency: 50/60 Hz Insulation: Grounding required

Temperature (at 4"
distance / 70ºF): 106ºF–111ºF (41ºC–44ºC)

Drying time: 12–15 seconds Mounting: Surface. ADA-compliant

Protection level: IP23 Splash Protection

®

Guide Specification

Surface-mounted ADA-compliant hand dryer shall have a thick cast iron cover with
white porcelain enamel coating (2902-2800), steel cover with white epoxy coating
(2902-2873), stainless steel cover with satin finish (2902-2874) or stainless cover
with bright polished finish (2902-2878). Hand dryer shall include aluminium base
plate, fully adjustable (2"– 8") infrared sensor potentiometer and fully adjustable
(3800 - 8200 RPM) universal-type motor potentiometer with resilient mounts and
sealed, lubricated ball bearings. Dryer shall operate at 64−70 dB while delivering
43−70 CFM of air at 106ºF–111ºF (41ºC−44ºC) and 4,920−9,840 LFM velocity
during user-controlled drying cycle. Dryer shall have a total power of 800–1,150 W
(1.07–1.54 Hp) with a consumption of 9.5–4.8 A.

Overall dimensions: 10½"H x 11½"W x 4"D (267mm x 292mm x
102mm).

Weight: 7.9 lb (3.58 kg)

1

⁄3 HP (250 W)

RPM: 3,800–8,200

Certificates: UL 499 / CSA C22.2 /

VDE GS / VDE EMC

© 2017 Bradley

P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) [phone]

bradleycorp.com

Dimensions

4"

(102mm)

2902-2800, 2902-2873, 2902-2874, 2902-2878

Adjustable Motor, Adjustable Sensor-Operated Warm Air Hand Dryer

11-5/8"

(295mm)

9¼"

(235mm)

9¼"

(235mm)

Dim. "A"

to finished

floor

Surface-mounted electrical

knockout located in lower

left corner of cover

4"

(102mm)

Surface-mounted electrical

knockout located in lower

left corner of cover

7¾"

(197mm)

10-5/8"

(270mm)

Model 2902-280000

11½"

(292mm)

9¼"

(235mm)

7¾"

(197mm)

10½"

(267mm)

Models 2902-287300, 2902-287400

and 2902-287800

All dimensions ± 4%.

7¾"

(197mm)

4½"

(114mm)

Dim. "A" Key Surface: For Dim. "A" Top of Unit Bottom of Unit

Sensor top to finished

48" (1219mm) 57¾" (1467mm)

47¹⁄₈" (1197mm)

floor

45" (1143mm) 54¾" (1391mm)

44¹⁄₈" (1121mm)

Ø ¼"

(7mm)

Ø 1"

(25mm)

Mounting Template Front View

Rough wall opening:

Surface Mount:

Orders composed of products indicated as Bradex®
will be available to ship in three days after receipt of
order at the factory. There is no pricing penalty for
this service from Bradley.

Page 2 of 2 9/20/2017
This information is subject to change without notice.
Bradley_HandDryer_2902-2800_2873_2874

42" (1067mm) 51¾" (1314mm)

40" (1016mm) 49¾" (1264mm)

No rough opening, see overall dimensions

41¹⁄₈" (1045mm)

39¹⁄₈" (994mm)

© 2017 Bradley

P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) [phone]

bradleycorp.com