Bradford-White Corp Electric Instantaneous Water Heaters User Manual
Electric Instantaneous Water Heaters
The KwickShot®Electric Instantaneous Water Heaters
Models Feature:
■ On Demand Hot Water—No delay.
■ Reduced Energy Waste—Flow switch activates heater only
on demand (no stand-by heat loss). 99% efficient.
■ Continuous Hot Water—No storage capacity to run out.
■ No Need for a T&P Relief Valve—Check local codes.
■ Integral Flow Restrictor—Built-in to ensure proper
temperature rise.
■ Prevention Of Bacteria Growth.
■ Easy Installation—Mounts on wall – no sweat connections.
■ Ni Chrome Heating Element—A unique, patented flow
path ensures optimum heat transfer and extended
element life.
■ Durable Design—Reduces calcification and sedimentation.
■ Space Saving Installation—Compact size.
■ High Temperature Limit Switch (ECO)—Protects against
element burn out, with reset button.
■ Warranty—Heaters are designed for durability and
guaranteed against failure due to leaks of Heater
Body/Element Assembly for a period of 10 years. Field
serviceable element with replaceable cartridge element (1
year warranty).
■ Single Phase and Three Phase models—Single Phase
models 240 volt and below are cUL certified.
For more information on warranty, please visit www.bradfordwhite.com
For pr
LISTED
WHERE
APPLICABLE
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171;
(B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534;
7,270,087 B2. OTHER U.S. AND FOREIGN P
KwickShot®is a registered trademark of Bradford White®Corporation.
TENT APPLICA
A
TIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105; 2,409,271.
oducts installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties.
See complete copy of the warranty included with the heater.
217-B-1108-A
E
S-3000-1-S-10 3.0 120 25.0 41 10 AWG
E
S-3500-1-S-10 3.5 120 29.0 48 10 AWG
ES-3500-4-S-10 3.5 240 14.6 48 14 AWG
E
S-4100-2-S-10 4.1 208 19.7 56 12 AWG
E
S-4100-5-S-10 4.1 277 14.8 56 14 AWG
ES-5500-4-S-10 5.5 240 22.9 75 10 AWG
M
odel
N
umber
k
W
R
ating
V
oltage AMPS
T
emperature
R
ise °F
0.5 GPM
R
ecommended
W
ire Size
Single Point (Single Phase)
I
ntregal 0.5 GPM flow control and faucet aerator provided.
Electric Instantaneous Water Heaters
3
8
"
3
8
"
O
UTLET
FLOW
REGULATOR
REMOVABLE
FILTER
I
NTLET
5
1
4
"
1
1
2
"
3
4
"
2
7
8
"
10
3
4
"
9
3
4
"
OUTLET INTLET
EFT-7500-4-S-10 7.5 240 32.0 — 68 51 34 25 8 AWG
EFT-9500-4-S-10 9.5 240 40.0 — 86 65 43 32 8 AWG
Model
NumberkWRating
Voltage AMPS
Temperature Rise °F
0.5
GPM
0.75
GPM
1.0
GPM
1.5
GPM
2.0
GPM
Recommended
Wire Size
Thermostatic (Single Phase)
Turn on 0.5 GPM (up to 6.5kW)
Turn on 0.7 GPM (7.5 kW and up)
Max Flow 2.0 GPM
5
1
4
"
1
1
2
"
3
4
"
2
7
8
"
10
3
4
"
9
3
4
"
2
1
2
"
ELECTRICAL
SUPPLY
Note: Designed to comply with 0.5GPM handwashing code target outlet
temperature 105°F - 110°F. Please consult local codes for electrical
requirements. Additional voltages and wattages are available. For more
information please consult factory.
Applications: Single Phase Only.
Shopping Malls, Schools, Stadiums, Public Hand Washing.
Refer to Voltage Identification Code Chart on page 5.
Specifications:
Dimensions: 103⁄4" x 51⁄4" x 27⁄8"
Weight: 3 lbs.
Materials:
Cover: ABS UL rated 94Vo.
Glass reinforced “UDEL†”
Heater Body and Ni Chrome Element
Color: White
Element: Replaceable cartridge insert
Pipe-Fittings: 3/8" NPT compression at
top of unit.
Operating Pressure: Min 25 PSI,
Max 150 PSI.
Please specify your application
when you place your or
Example: EFT
(Dishwasher 180
SPEC OPTIONS:
S - Sanitation Setting 180
FS - Factor
(Ambient to 180
ML - Multiple Lavs (5.5 to 10kW)
Factor
.5 GPM T
Specifications:
Dimensions: 103⁄4" x 51⁄4" x 27⁄8"
Weight: 3 lbs.
Materials:
Cover: ABS UL rated 94Vo.
Glass reinforced “UDEL†” Heater Body and Ni
Chrome Element
Color: White
Standard temperature range 100°F-140°F.
Maintains accurate temperature control +/- 1°F
Element: Replaceable cartridge insert
Pipe-Fittings: 1/2" NPT compression at bottom
of unit.
Operating Pressure: Min 25 PSI, Max 150 PSI.
.
der
-9500-4-S-10-S
F)
°
emperatur
y Set T
y Set T
ur
n On
F)
°
emp 105
Note: Designed to comply with 0.5GPM handwashing code
target outlet temperature 105°F - 110°F. Please consult local
codes for electrical requirements. Additional voltages and
wattages are available. For more information please consult
.
y
factor
Refer to Voltage Identification Code Chart on page 5.
Applications: Single Phase Only.
Dishwashers, Boosters (to 180°F). Schools, Hospitals, Nursing
Homes, Laboratories. Emergency Eye Wash Fountains. Single
and Multiple Handwash Stations.
F
°
e
°F.
2
Loading...