Bradford White SW-2-120-L, SW-2-80-L User Manual

Residential PowerStor Series

Single-Wall Indirect Water Heater

The PowerStor Series® Single-Wall Models feature:

■ Heat Exchanger—Single-Wall 1

⁄2" (38mm) O.D. glass coated (Vitraglas®) carbon steel coil. The coil has a heat transfer area of 14.2 sq. ft. and a stored water volume of 2.7 Gal. (10.2L) Maximum supply temperature from the boiler must not exceed 240°F (116°C).

■ Factory Installed Hydrojet

Total Performance System—Sediment

reducing device that also increases first hour delivery of hot water while minimizing temperature build-up in tank.

■ Vitraglas

superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas

Lining—An exclusively engineered enamel formula that provides

) is fused to the steel surface by firing at a temperature of

over 1600°F (871°C).

■ Immersed Adjustable Honeywell Aquastat—Fast acting immersion aquastat for automatic temperature control (adjustable from 80°F to 160°F), (27°C to 71°C).

■ Supply and Return Connections—1" (25mm) NPT female connections are located on the front for both the boiler collector supply and return.

■ Insulation System—2" (51mm) Non-CFC foam insulation covers the sides and top of the tank, reducing heat loss. This results in less energy consumption, improved efficiencies, and jacket rigidity.

■ Potable Water Connections—3⁄4"(19mm) NPT (1" (25mm) NPT for 120 gallon (454L) model) factory installed true dielectric fittings extend water heater life and eases installation.

■ Three Protective Aluminum Anode Rods—Provide added protection against corrosion for long-term, trouble-free service.

■ Steel Tank—Heavy gauge steel automatically formed, rolled and welded to assure a continuous seam for glass lining.

■ T&P Relief Valve—Included.

■ Low Restriction Brass Drain Valve—Durable tamper proof design.

■ AHRI Certified—These water heaters are rated by the Air-Conditioning,

Heating, and Refrigeration Institute to provide accurate performance data within the standards of the certification. This certification provides a recognized standard for proper comparison of hydronic appliances.

Photo is of SW-2-65-L

Limited Lifetime Tank and Heat Exchanger Warranties / 6-Year Limited Warranty on Component Parts.

For more information on warranty, please visit www.bradfordwhite.com

For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete copy of the warranty included with the heater.

MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821; 7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117; 7,621,238; 7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. Vitraglas

and Hydrojet® are registered trademarks of Bradford White® Corporation.

554-B-0619

Residential PowerStor Series® Single-Wall Indirect Water Heater

140°F 115°F

Approximate Boiler

Output Needed

For Ratings

(BTU/Hr.)

55,000 55,000 55,000 55,000

GPM Ft. of Hd. Loss

Single Wall Models

Model

Number

SW-2-30-L SW-2-40R-L SW-2-50R-L SW-2-65-L SW-2-80-L SW-2-120-L

Model

Number

SW-2-30-L SW-2-40R-L SW-2-50R-L SW-2-65-L SW-2-80-L SW-2-120-L

Capacity

U.S. Gal.

29 37 43 57 71

110

Capacity

Liters

110 140 163 216 269 416

Imp. Gal.

24 31 36 47 59 92

Floor to

Heater

Top

in.

/ 411/8 461/4 591/4

Floor to

Heater

Top

mm.

854 1045 1175 1505 1499 1588

Jacket

Dia.

in.

22 22 22 22 24

Jacket

Dia.

mm.

559 559 559 559 610 718

Floor to

T&P

Conn.

in.

281/ 343/8 401/8 531/8 527/8 553/4

Floor to

T&P

Conn.

mm.

718

873 1019 1349 1343 1416

Floor to

Water Conn.

in.

343/ 417/8

47 60

631/4

Floor to

Water Conn.

mm.

873 1064 1194 1524 1518 1607

Floor to

Exchanger

Floor to

Exchanger

Meet or exceed ASHRAE 90.1b (current standard)

Outlet

in.

5 53/8 53/8 53/8 53/8 63/8

Outlet

mm.

137 137 137 137 137 162

AHRI Certified Water Heater Ratings

0.67

0.61

0.50

0.39

0.33

0.22

Minimum

Output Rate

of Heat Source

(kW/Hr.)

Model Number

SW-2-30-L SW-2-40R-L SW-2-50R-L SW-2-65-L SW-2-80-L SW-2-120-L

First Hour

Delivery

@ 135°F

(Gal.)

255 260 265 275 295 325

Continuous

Draw Rating

@ 135°F

(Gal./Hr.)

235 235 235 235 235 235

Standby

Heat Loss

Rating

(°F/Hr.)

1.2

1.1

0.9

0.7

0.6

0.4

Minimum

Output Rate

of Heat Source

(BTU/Hr.)

157,000 157,000 157,000 157,000 157,000 157,000

Minimum

Heat Source

Flow Rate

(Gal./Min.)

13.7

Model Number

SW-2-30-L SW-2-40R-L SW-2-50R-L SW-2-65-L SW-2-80-L SW-2-120-L

First Hour

Delivery

@ 57°C (Liters)

965

984 1003 1041 1117 1230

Continuous

Draw Rating

@ 57°C

(Liters/Hr.)

890 890 890 890 890 890

Standby

Heat Loss

Rating

(°C/Hr.)

These certified ratings were obtained with a heat source output rate and flow rate as specified and a 180°F (82°C) boiler water supply temperature. Other results will be obtained under different conditions.

DOE Water Heater Performance

Maximum First Model Number

SW-2-30-L SW-2-40R-L SW-2-50R-L SW-2-65-L SW-2-80-L SW-2-120-L

Hour Rating

(Gal.) @

140°F 115°F

279 288 297 306 321 357

Based on 200°F boiler water temperature and 50°F

429 438 447 456 470 507

Continuous

Draw Rating (Gal./Min.) @ 140°F 115°F

6.7

4.2

6.7

4.2

6.7

4.2

6.7

4.2

6.7

4.2

6.7

4.2

Approximate Boiler Output

Needed for

Ratings (BTU/Hr.)

220,000 220,000 220,000 220,000 220,000 220,000

ANODE ROD

CONFIGURATIONS

SW-2-30-L SW-2-40R-L SW-2-50R-L SW-2-65-L

SW-2-80-L

potable water inlet.

Heat Exchanger Head Loss

0.0150.0980.22100.80120.50

SW-2-120-L

Floor to

Exchanger

Floor to

Exchanger

46.0

Inlet

in.

271/

271/2 271/2 271/2 271/2 281/2

Inlet

mm.

699 699 699 699 699 720

Heat Source

(Liters/Min.)

CONNECTIONS

Minimum

Flow Rate

51.8

POTABLE

(TYPICAL)

G Floor to Aquastat

in.

/ 111/2 111/2 111/2 111/2 111/2

G Floor to Aquastat

mm.

292 292 292 292 292 292

Approx.

Shipping

Weight

lbs.

164 185 195 225 250 370

Approx.

Shipping

Weight

kg.

74 85

89 102 114 167

General:

All units are certified at 300 PSI (2068 kPa) test pressure and 150 PSI (1034 kPa) working pressure. Potable water connections are 3/4" (19mm) NPT on 8" (203mm) centers. The 120 gallon model has 1" (25mm) NPT potable water connections on 8" (203 mm) centers.

Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.

Suitable for Water (Potable) Heating and Space Heating.

Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into the potable side of this system. The potable side may NEVER be connected to any existing heating system or component(s) previously used with a non-potable water heating appliance. The heat exchanger side of the unit may be used in space heating applications.

For field service, contact your professional installer or local Bradford White sales representative.

Sales 800-523-2931 n Fax 215-641-1612 Technical Support 800-334-3393

Ambler, PA

Warranty 800-531-2111

Email techserv@bradfordwhite.com

Email warranty@bradfordwhite.com

International: Telephone 1-215-641-9400 n Email international@bradfordwhite.com / www.bradfordwhite.com

Printed in U.S.A.554-B-0619