Bradford White MS80R6SS User Manual
Solar Saver
®
Electric Backup Models
The Solar Saver®Models feature:
■ Backup Element—A single backup heating element provides heat only
when solar energy does not satisfy demand.
■ Factory Installed Hydrojet
®
Total Performance System—Cold water inlet
sediment reducing device helps prevent sediment build up in tank.
Increases first hour delivery of hot water while minimizing temperature build
up in tank.
■ Vitraglas
®
Lining—Bradford White tanks are lined with an exclusively
engineered enamel formula that provides superior tank protection from the
highly corrosive effects of hot water. This formula (Vitraglas
®
) is fused to the
steel surface by firing at a temperature of over 1600°F (871°C).
■ Fully Automatic Controls—Fast acting surface-mount thermostat for
automatic temperature control. Factory installed sensitive manual reset
energy cutoff for safety to prevent overheating.
■ Supply and Return Connections—3⁄4" NPT female connections are
located on the top for both the solar collector supply and return.
■ Alternate Solar Collector Supply and Return Connections—Located on
the front for additional application flexibility (MS80 and MS120 only).
■ 2" Non-CFC Foam Insulation—Covers the sides and top of tank, reducing
the amount of heat loss. This results in less energy consumption, improved
operation efficiencies and jacket rigidity.
■ Potable Water Connections—3⁄4" NPT factory installed true dielectric
fittings extend water heater life and eases installation.
■ Sensor Wires for Solar Thermistor Connections—Twisted wires are
provided as a means for connecting thermistors to a solar controller
(thermistors and solar controller are not provided).
■ Protective Magnesium Anode Rod—Provide added protection against
corrosion for long trouble-free service.
■ Direct Heat Transfer With Immersed Element—Transfers heat directly and
efficiently to the water. Screw-in style.
■ T&P Relief Valve—Included.
■ Low Restriction Brass Drain Valve—Durable tamper proof design.
6 or 10-Year Limited Tank Warranties / 6-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the warranty included with the heater.
Photo is of
MS80R6SS
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171;
(B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534;
7,270,087 B2. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105; 2,409,271.
Vitraglas
®
and Hydrojet®are registered trademarks of Bradford White®Corporation.
500-B-0213-A
Electric Backup Models
Meet or exceed ASHRAE 90.1b (current standard)
Model
Number
Approx.
Shipping
Weight
lbs.
A
Floor to
Heater
Top
in.
C
Floor to
Water
Conn.
in.
B
Jacket
Dia.
in.
Capacity Recovery at
90°F Rise*
MS65R6SS
MS80R6SS†
MS120R6SS†
U.S.
Gal.
65
80
119
Imp.
Gal.
54
67
99
U.S.
GPH
21
21
21
Imp.
GPH
18
18
18
59
59
62
1
/
2
60
60
63
1
/
2
168
210
310
22
24
28
E
Floor to Alt.
Collector
Return
Conn.
in.
—
38
38
1
/
4
—
7
7
/
8
77/
8
521/
2
521/
2
56
D
Floor to
T&P
Conn.
in.
Model
Number
Approx.
Shipping
Weight
kg.
A
Floor to
Heater
Top
mm.
C
Floor to
Water
Conn.
mm.
B
Jacket
Dia.
mm.
Capacity Recovery at
50°C Rise*
MS65R6SS
MS80R6SS†
MS120R6SS†
Liters
246
303
450
Liters/
Hour
79
79
79
1499
1499
1594
1524
1524
1613
75
95
141
559
610
711
E
Floor to Alt.
Collector
Return
Conn.
mm.
—
965
972
F
Floor to Alt.
Collector
Supply
Conn.
in.
F
Floor to Alt.
Collector
Supply
Conn.
mm.
—
200
200
1334
1334
1422
D
Floor to
T&P
Conn.
mm.
Solar Saver®Water Heater System
General
All electric water heaters are certified at 300 PSI test pressure (2068 kPa) and 150 PSI working pressure (1034 kPa). All potable water and electrical
connections are 3⁄4" NPT (19mm) on 8" (203mm) centers. All models ETL listed.
Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
Suitable for Water (Potable) Heating and Space Heating.
Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into the potable side of this system. The potable side may NEVER be
connected to any existing heating system or component(s) previously used with a non-potable water heating appliance.
* Based on standard 240 volt, 4500 W operation.
†Models offer additional solar collector return connections.
If requirements are for storage only, do not use element connections.
Printed in U.S.A.
500-B-0213-A
©2013, Bradford White Corporation. All rights reserved.
Ambler, PA
For U.S. and Canada field service, contact your professional installer or local Bradford White sales representative.
Sales 800-523-2931 ●Fax 215-641-1670 / Technical Support 800-334-3393 ●Fax 269-795-1089 ●Warranty 800-531-2111 ●Fax 269-795-1089
International: Telephone 215-641-9400
●
Telefax 215-641-9750 / www.bradfordwhite.com
Sales / Technical Support 866-690-0961 / 905-238-0100 ●Fax 905-238-0105 / www.bradfordwhite.com
B
A
C
E
D
F
4
1
3
2
8"
8"
#1 - 3/4" (19mm) Pump Suction
#2 - 3/4" (19mm) Cold Inlet
#3 - 3/4" (19mm) Collector Return
#4 - 3/4" (19mm) Hot Outlet
Loading...