Bradford White MS65R6SS User Manual
Solar Saver
®
Electric Backup Models
The Solar Saver®Models feature:
ackup Element—Asingle backup heating element provides heat only
■ B
hen solar energy does not satisfy demand.
w
■ Factory Installed Hydrojet®Total Performance System—Cold water inlet
sediment reducing device helps prevent sediment build up in tank.
Increases first hour delivery of hot water while minimizing temperature build
up in tank.
■ Vitraglas®Lining—Bradford White tanks are lined with a exclusively
engineer
corrosive effects of hot water. This formula (Vitraglas
surface by firing at a temperature of over 1600ºF.
■ Fully Automatic Controls—Fast acting surface-mount thermostat for
automatic temperature control. Factory installed sensitive manual reset
energy cutoff for safety to prevent overheating.
■ Supply and Return Connections—3⁄4" NPT female connections are
located on the top for both the solar collector supply and return.
■ Alternate Solar Collector Supply and Return Connections—Located on
the front for additional application flexibility (MS80 and MS120 only).
■ 2" Non-CFC Foam Insulation—Covers the sides and top of tank, reducing
the amount of heat loss. This results in less energy consumption, improved
operation efficiencies and jacket rigidity.
■ Potable Water Connections—3⁄4" NPT factory installed true dielectric
fittings extend water heater life and eases installation.
■ Sensor Wires for Solar Thermistor Connections—Twisted wires are
provided as a means for connecting thermistors to a solar controller
(thermistors and solar controller are not provided).
■ Protective Magnesium Anode Rod—Provide added protection against
corrosion for long trouble-free service.
■ Direct Heat Transfer With Immersed Element—Transfers heat directly and
efficiently to the water. Screw-in style.
■ T&P Relief V
■ Low Restriction Brass Drain Valve—Durable tamper proof design.
ed enamel formula that provides superior protection from the highly
alve—
Included.
®
) is fused to the steel
Photo is of
MS80R6SS
6 or 10-
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the war
ACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS:
MANUF
(B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968; 4,672,919; Re. 34,534;
7,270,087 B2. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105; 2,409,271.
Vitraglas®and Hydr
ojet
®
egister
e r
ar
ed trademarks of Bradfor
Year Limited Tank Warranties / 6-Year Limited Warranty on Component Parts.
ranty included with the heater
5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185; 5,485,879; 5,277,171;
®
d White
Corporation.
.
500-B-0610-A
Electric Backup Models
M
eet or exceed ASHRAE 90.1b (current standard)
M
odel
Number
A
pprox.
S
hipping
Weight
lbs.
A
F
loor to
Heater
T
op
in.
C
F
loor to
Water
C
onn.
in.
B
J
acket
Dia.
in.
C
apacity Recovery at
9
0°F Rise*
MS65R6SS
MS80R6SS†
MS120R6SS†
U
.S.
Gal.
65
80
119
I
mp.
Gal.
54
67
99
U
.S.
GPH
21
21
21
I
mp.
GPH
18
18
18
59
59
62
1
/
2
60
60
63
1
/
2
168
210
310
22
24
28
E
F
loor to Alt.
Collector
R
eturn
Conn.
in.
—
38
38
1
/
4
—
7
7
/
8
77/
8
521/
2
521/
2
56
D
F
loor to
T&P
C
onn.
in.
Model
N
umber
Approx.
Shipping
W
eight
k
g.
A
Floor to
H
eater
Top
m
m.
C
Floor to
W
ater
Conn.
m
m.
B
Jacket
D
ia.
m
m.
Capacity Recovery at
50°C Rise*
M
S65R6SS
MS80R6SS†
MS120R6SS†
L
iters
2
46
303
450
L
iters/
H
our
7
9
79
79
1
499
1499
1594
1
524
1524
1613
7
5
95
141
5
59
610
711
E
Floor to Alt.
C
ollector
Return
Conn.
m
m.
—
965
972
F
F
loor to Alt.
Collector
S
upply
Conn.
in.
F
Floor to Alt.
C
ollector
Supply
Conn.
m
m.
—
200
200
1
334
1334
1422
D
Floor to
T
&P
Conn.
m
m.
Solar Saver®Water Heater System
B
A
C
E
D
F
4
1
3
2
8"
8"
* Based on 4500W operation
†Models offer additional solar collector return connections.
If requirements are for storage only, do not use element connections.
#1 - 3/4" (19mm) Pump Suction
#2 - 3/4" (19mm) Cold Inlet
#3 - 3/4" (19mm) Collector Return
#4 - 3/4" (19mm) Hot Outlet
General
All electric water heaters are certified at 300 PSI test pressure (2068 kPa) and 150 PSI working pressure (1034 kPa). All potable water and electrical
connections are 3⁄4" NPT (19mm) on 8" (203mm) centers. All models UL listed.
Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
Suitable for W
Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into the potable side of this system. The potable side may NEVER be
connected to any existing heating system or component(s) previously used with a non-potable water heating appliance.
ater (Potable) Heating and Space Heating.
Sales 800-523-2931 ●Fax 215-641-1670 / T
500-B-0610-A
For U.S. and Canada field ser
International:
vice, contact your pr
echnical Suppor
Telephone 215-641-9400 ●Telefax 215-641-9750 / www.bradfordwhite.com
Sales / T
echnical Suppor
©2010, Bradford White Corporation. All rights reserved.
, PA
Ambler
ofessional installer or local Bradfor
t
800-334-3393 ●Fax 269-795-1089 ●W
t
866-690-0961 / 905-238-0100 ●Fax 905-238-0105 / www
d White sales r
ranty
ar
800-531-2111 ●Fax 269-795-1089
epresentative.
.bradfor
dwhite.com
Printed in U.S.A.
Loading...