DDVC/08 VR DDC/08 VR
FB00085-EN
USER MANUAL
DDVC/08 VR - DDC/08 VR
ABC
A Z
Z
A
Page 3 - Manual code FB00085-EN - ver. 1 - 06/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Page 2 - Manual code FB00085-EN - ver. 1
- 06/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Functions
Surveillance camera lens;
Speaker;
Warning LEDs:
Red - Call in progress
Green - Door open
Yellow - Conversation in
progress
Blue - System busy
Display;
Function Keys;
Keypad;
RFID Code Reader;
Microphone
Page 3 - Manual code FB00085-EN - ver. 1
- 06/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Main Warnings
Call in progress
CALL
ESC
Call
Forwarded
Door
Open
System
Busy
Door release
Conversation in progress
ESC
ESC
ESC
ESC
DOOR OPEN
TALK
BUSY
TALK
System busy
ABC
A Z
Z
A
15
ESC
ESC
ESC
ABC
A Z
Z A
15
ESC
A
C
E
G
B
D
F
H
ESC
ESC
Page 5 - Manual code FB00085-EN - ver. 1 - 06/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Page 4 - Manual code FB00085-EN - ver. 1
- 06/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Activating entry panel from receiver
ESC
WELCOME
WELCOME
CALL
BUSY PRIVACY
Call with code to internal receiver
To call an internal receiver you
must key in the call code associated to it then press the key
(B, C, D).
Call codes can be made up of
between 1 and 8 digits.
If an incorrect or non-existent
code is entered, the relative error window will appear on the
display E.
The appearance of the word
[CALL] F and lighting up of the
LED
shows the call request
has been sent to the internal
receiver selected.
If the entry panel has been set
up for this, it will also play a
special voice message.
If the user being called is busy
on another conversation G,
does not want to be disturbed
H or is absent I the relevant
warnings will appear on the dis-
ESC
ABC
A Z
Z
A
ABC
A Z
Z
A
ESC
I
A B
K
J
L
ESC
ABC
A Z
Z
A
Page 5 - Manual code FB00085-EN - ver. 1
- 06/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
play and then it will go back to
the initial screen A.
The appearance of the word
[TALK] J and lighting up of the
LED shows that the user being called has answered and is
in conversation.
If the user being called activates
the solenoid lock, the words
[DOOR OPEN] will appear on
the display K and the LED
ABSENT
WELCOME
WELCOME
DOOR OPEN
TALK
WELCOME
will begin to flash.
If the entry panel has been set up for this, the opening of the door will be accompanied by
a special voice message.
At the end of the conversation the initial window will be displayed again L.
On every screen that shows the [ESC] symbol, pressing that key will take you back to the
initial window, interrupting the action in progress.
Call with search for names/blocks
Should the user name not be
recognised, there is the option, via the main screen A
or by pressing the function key
marked with B, of doing a
search:
- in ascending alphabetical order (from A to Z), by pressing the A
Z key,
- in descending alphabetical order (from Z to A), by pressing the Z A key,
- a free alphabetical search by pressing the ABC key,
- by block, by pressing the key.
ABC
A
Z
Z
A
ESC
ABC
A
Z
Z
A
ESC
ABC
A
Z
Z
A
ESC
ESC
ESC
ESC
ESC
15
ESC
C
E
G
I
D
F
H
J
Page 7 - Manual code FB00085-EN - ver. 1 - 06/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Page 6 - Manual code FB00085-EN - ver. 1
- 06/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
USER SEARCH
USER SEARCH
USER SEARCH
A_
Select call
Select call
A to Z Search
Free search
Z to A Search
A to Z Search
Free search
Z to A Search
A to Z Search
Free search
Z to A Search
ANGELINI
BIANCHI
COMASCHI
DAMICO
ANGELINI
BIANCHI
COMASCHI
DAMICO
ROSSI
SASSI
TONI
VERDI
Please, write
the required
user
name
Ascending search (from A to Z)
From the [USER SEARCH]
screen press the A
Z key C to
be able to display the names in
ascending order.
Once the user has been chosen
using the arrows, press the
key to make the call D. To exit without making a call, press [ESC].
Descending search (from Z to A)
From the [USER SEARCH]
screen press the Z
A key E
to be able to display the names
in descending order. Once the
user has been chosen using the
arrows, press the key to
make the call F. To exit without making a call, press [ESC].
Free Search
From the [USER SEARCH]
screen press the [ABC] key G
to be able to enter the initial letters of the name in sequence
H, and I displays the list of
users from the closest reference. It is possible to delete one
or more characters starting with
the last one by pressing the
key.
To exit without making a call,
press [ESC]. Once the user has
been chosen, press the key
to make the call J.
ABC
A
Z
ESC
ESC
ESC
ESC
ABC
A
Z
ABC
A
Z
K
A B
M
D
L
C
Page 7 - Manual code FB00085-EN - ver. 1
- 06/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
y The search functions can only be used if the entry panel has been programmed to
display the user names.
Call with Block Search
A search by block can be carried out via suitable programming using the PCS/XIP tool.
The
icon will appear on the main screen and it will no longer be possible to perform a
descending search Z A.
WELCOME
EAST4
CALL
Press
to
confirm
East
East
North
West
South
From the [USER SEARCH]
screen, press the key K
to be able to display the list of
blocks in alphabetical order.
With the arrows L select
the block and enter the call
code for the internal receiver belonging to the block selected
M. Press
to make the call.
To exit without making a call, press [ESC].
Concierge Call
To call the concierge service,
in systems where this is envisaged, press the function key
B.
The appearance of the word
[CALL] and lighting up of the
LED D shows the conversation request has been sent. If
the entry panel has been set up
for this, it will also play a special
voice message.
WELCOME
ESC
ESC
ESC
ABC
A
Z
ESC
E
G
I
K
J
ESC
ESC
F
H
Page 9 - Manual code FB00085-EN - ver. 1 - 06/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Page 8 - Manual code FB00085-EN - ver. 1
- 06/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
BUSY
TALK
TALK
WELCOME
DOOR OPEN
ABSENT
HOLD ON
If the concierge is busy on
another conversation E or is
absent F the display will show
the relevant messages and then
will go back to the initial screen
A.
The appearance of the word
[TALK] G on the screen and
lighting up of the LED shows
that the concierge has answered and is in conversation.
If you wan to talk to one of the
extensions, the concierge will
check the availability of the user
requested H and if possible
put the internal receiver into direct conversation with the entry
panel I.
Activating the solenoid lock is
possible by both the concierge and the internal receiver. In
this case, the display will show the [DOOR OPEN] symbol
J and the LED will light up
.
If the entry panel has been set up for this, the opening of
the door will be accompanied by a special voice message.
At the end of the conversation the initial window will be displayed again K.
On every screen that shows the [ESC] symbol, pressing that
key will take you back to the initial window, interrupting the
action in progress.
ESC
***
ESC
WXYZ
PQRS TUV
JKL
MNO
ABC
DEF
GHI
ESC
***
A
C
ESC
***
ESC
B
D
A
ESC
B
ESC
C
Page 9 - Manual code FB00085-EN - ver. 1
- 06/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
DOOR OPEN
Opening door with code
To open the door press the
key A, enter the access code
B (4-8 figures) and press the
key again.
If the code is valid, the [DOOR
OPEN] symbol will appear on
the display C, the LED will light
up , a confirmation beep will
sound, and it will be possible to
go in.
If the entry panel has been set
up for this, the opening of the
door will be accompanied by a special voice message.
If the code is not valid, 3 fast beeps will warn there has been an error D.
Opening door with proximity card
To open the door, bring the
proximity card up to the reader
A.
If the code is valid, the [DOOR OPEN] symbol will appear on
the display B, the LED will light up
, a confirmation beep
will sound, and it will be possible to go in.
If the entry panel has been set up for this, the opening of
the door will be accompanied by a special voice message.
If the code is not valid, 3 fast beeps will warn there has
been an error C.
DOOR OPEN
ESC
***
ESC
A B
Page 11 - Manual code FB00085-EN - ver. 1 - 06/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Page 10 - Manual code FB00085-EN - ver. 1
- 06/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Timed door opening
In systems where this function
has been programmed, in the
time period set, it is possible to
open the door simply by pressing the key A: the LED will
light up , a confirmation beep
will sound and it will be possible
Decommissioning and disposal. Do not dispose of the packaging material and
the device at the end of its life cycle in the environment, but dispose of them in
compliance with the laws in eect in the country in which the product is being used.
The recyclable components are marked with a symbol and the material's ID marker.
THESE INSTRUCTIONS MUST BE ATTACHED TO THE DEVICE, THE DATA AND INFORMATION CONTAINED ARE TO BE CONSIDERED
AS SUBJECT TO CHANGE AT ANY TIME AND WITHOUT THE NEED FOR ANY ADVANCE WARNING.
DOOR OPEN
to go in B. Outside the programmed time period, this function is not active; it is especially
useful to grant access to sta from service providers at authorised times.
Page 11 - Manual code FB00085-EN - ver. 1
- 06/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Came S.p.A.
Via Martiri Della Libertà, 15 Via Cornia, 1/b - 1/c
31030 Dosson di Casier
Treviso - Italy
33079 Sesto al Reghena
Pordenone - Italy
(+39) 0422 4940
(+39) 0422 4941
(+39) 0434 698111
(+39) 0434 698434
www.came.com
Loading...