Agata V – Agata VC
Agata VC/B – Agata VC/B-L
FB00080-EN
USER MANUAL
AGATA V - AGATA VC
AGATA VC/B - AGATA VC/B-L
INTERNAL VIDEO
RECEIVER
Page 2 - Manual code FB00080-EN - vers. 1
- 12/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Function of buttons
Press repeatedly to adjust the ringtone volume: low, medium, high, o (red LED
on).
Press repeatedly to adjust the screen brightness.
This function is available when video is activated.
For devices with black and white LCD, press repeatedly to adjust the contrast.
For devices with colour LCD, press repeatedly to adjust the screen colour
saturation.
This function is available when video is activated.
Auxiliary 1
Active also when there is no communication if the system permits it.
Auxiliary 2 / Concierge call (green LED).
1-8
Intercom buttons 1-8
Pressing for < 2 seconds (red flashing LED) activates intercom calls from 5 to
8.
Pressing for > 2 seconds (red LED on) sends a panic signal to the concierge
desk (where present).
Activates and selects the entry panel (blue LED).
This function is available only when the line is free.
Door lock release (blue LED).
During a call from an entry panel or self-connection, the permanently lit LED
indicates that the door is open (the system must be set up as necessary to
generate this signal).
Only use soft, dry or slightly damp cloths to clean; do not use any chemical products.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Page 3 - Manual code FB00080-EN - vers. 1
- 12/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Standard functions
Call in progress.
Answering a call.
Communication activated.
Entry panel door lock release.
Ending the communication
!
!
!
!
!
MASTER
MASTER
SLAVE
SLAVE
Page 4 - Manual code FB00080-EN - vers. 1
- 12/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Self-connection
Press the key to activate video
communication with the entry panel.
Where there is more than one entry panel,
press the key multiple times to show
all the panels in succession.
Video toggle
For simultaneous
video calls on multiple
receivers, all receivers
will ring but video will
be activated only on the
MASTER receivers.
Viewing can be
transferred to a SLAVE
receiver by pressing the
key.
For audio
communication with
the entry panel, pick up
the handset.
Int. 1 Int. 2
Int. 2
Int. 2
Int. 2Int. 1
Int. 1
2
Int. 1
Page 5 - Manual code FB00080-EN - vers. 1
- 12/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
With a call active,
select the internal
receiver to which
the call is to be
transferred.
As soon as the
internal receiver
which has been
called picks up the
handset, the call is
active between the
two receivers; the
entry panel remains
on hold.
To connect internal
receiver 2 with
the entry panel,
internal receiver 1
must replace the
handset.
The internal
receiver receiving
the call can
retransfer it.
Call transfer (Agata VC/B - Agata VC/B-L only)
Int. 1
Int. 1
Page 6 - Manual code FB00080-EN - vers. 1
- 12/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Intercom (Agata VC/B - Agata VC/B-L only)
To call an internal receiver,
pick up the handset and press
the button for the receiver you
want.
During a conversation between
internal receivers, a call from
an entry panel is signalled to
the receivers with a beep that
is repeated every 5”.
3 successive beeps indicate
that it is not possible to make
calls because the line is busy.
CALL ME
CALL ME
call n2
ALARM!
Page 7 - Manual code FB00080-EN - vers. 1
- 12/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Concierge desk functions (Agata VC/B - Agata VC/B-L only)
The functions described in this chapter are only available in systems equipped with a
concierge desk.
Call from concierge notification
When the Aux2 LED is on, this indicates that
the concierge wants to be called back.
The LED turns o when communication with
the concierge begins.
Press the button for at least 2 seconds;
the receiver beeps and the red LED turns on
to confirm that the panic signal has been sent
to the concierge, together with the caller’s
number. The receiver LED stays on until the
concierge calls the user back.
The panic signal takes priority over all calls.
Panic button function
Alarm signal
When an alarm contact connected to
the relevant receiver input is activated,
this sends a signal to the concierge and
the receiver beeps intermittently for
approximately 10 seconds.
Decommissioning and disposal. Dispose of the packaging material and the device at the end of
its life cycle responsibly, in compliance with the laws in force in the country where the product is used.
The recyclable components are marked with a symbol and the material's ID marker.
THESE INSTRUCTIONS MUST BE ATTACHED TO THE DEVICE; THE DATA AND INFORMATION ARE TO BE CONSIDERED AS SUBJECT
TO CHANGE AT ANY TIME AND WITHOUT THE NEED FOR ANY ADVANCE WARNING.
Came S.p.A.
Via Martiri Della Libertà, 15 Via Cornia, 1/b - 1/c
31030 Dosson di Casier
Treviso - Italy
33079 Sesto al Reghena
Pordenone - Italy
(+39) 0422 4940
(+39) 0422 4941
(+39) 0434 698111
(+39) 0434 698434
www.came.com
Page 8 - Manual code FB00080-EN - vers. 1
- 12/2015 - © Came S.p.A. - The contents of the manual are to be considered as subject to change at any time and without the need for any advance warning.
Loading...