Boxlight CP-730e, CP-740e User Manual

Multimedia LCD Projector

Multimedia LCD Projector

About User's manual

Projector Feature

Thank you for purchasing the LCD projector.

Please read this user’s manual thoroughly to

ensure correct usage of the projector and its

features. After reading, store this instruction

manual in a safe place for future reference.

1. Business/ Home theater projector.

2. Support P-scan / 3:2 pull down

3. Intelligent controlling fan system.

4.Two way keystone function, horizontal & vertical.

5.Auto ceiling function.

6.Still function, digital zoom

7.Slim type remote control.

h
s

i
l

g
n
E

The content of this manual is subject to change without period notice.

All rights reserved.

Issue of edition 0102.25_04

1

Multimedia LCD Projector

E
n
g
l

i
s

h

Table of Contents

‧ Safety Instructions............................................

‧ Checking the Package Content........................

‧ Before Use

Names and Function of Each Part

Main Unit...................................................

Keypad Control .........................................

Rear View / IO Board ...............................

Bottom View..............................................

Remote Control..........................................

Inserting the batteries.......................................

Installation

Setting Up the Projector.............................

Screen Size and Projection Distance...........

Adjusting the Image position.....................

Moving the Projector................................

.. 04

.. 10

.

..12

...14

...16

.. 18

.. 19

.. 20

.. 23

.. 25

.. 26

.. 27

How to connect

Desktop PC................................................

Laptop PC...................................................

DVI-I port....................................................

USB Mouse................................................

Video..........................................................

2

.. 28

.. 29

.. 30

.. 31

.. 32

Basic Operation

Turning on the Projector..............................

Adjusting the screen image.........................

Turning off the power.................................

Function of Menu(OSD)

Multimedia LCD Projector

..34

..36

..37

h
s

i
l

g
n
E

Keypad operating........................................

Computer mode..........................................

Video Mode................................................

Maintenance and Troubleshooting

Cleaning the Projector................................

Cleaning the Lens.........................................

Cleaning the Air filter..................................

Lamp Replacement.....................................

Indicator...........................................................

List of Monitor Displays Modes..........................

‧

Specification..........................................................

‧

.. 38

.. 39

.. 46

.. 52

.. 52

.. 53

.. 54

.. 55

.. 56

.. 57

3

Multimedia LCD Projector

E
n
g
l

i
s

h

About the symbols

Various symbols are used in this instruction manual and on the

product itself to ensure correct usage, to prevent danger to the

users and others, and to prevent property damage. The meanings

of these symbols are described below. It is important that you

read these descriptions thoroughly and fully understand the contents.

Warni ng

This symbol indicates information that, if ignored, could

possibly result in personal injury or even death.

Caution

This symbol indicates information that, if ignored, could

result possibly in personal injury or physical damage.

Typical Symbols

This symbol indicates an additional warning (including cautions).

An illustration is provided to clarify the contents (for example:the

illustration to the left indicates danger of electrical shock)

This symbol indicates a prohibited action. The contents will be

clearly indicated in an illustration or description near the symbol (for

example: the symbol to the left indicates that disassembly is prohibited).

This symbol indicates a compulsory action. The contents will be

clearly indicated in an illustration or description near the symbol (for

example:the symbol to the left shows that the power plug should be

disconnected from the power outlet).

4

Multimedia LCD Projector

Warning

! If a problem should occur.

• If smoke or a strange odors arise, continued use could result in fire or electrical shock. In

such case, immediately turn off the power switch and then disconnect the power plug from

the power outlet. After making sure that the smoke or odor has stopped, contact your dealer

for repairs. Never attempt to make repairs yourself because this is dangerous.

• Do not use this projector if there is no image or sound, or if the sound is distorted. Continued

use could result in fire or electrical shock.In such case, immediately turn off the power switch;

disconnect the power plug from the power outlet and contact your dealer.

• If water enter the inside of this projector, immediately turn off the power switch, disconnect

the power plug from the power outlet and contact your dealer

! Do not install on an unstable surface.

• Do not install this projector on an unstable surface such as a wobbly stand or incline

because this could result in the projector falling and causing injury.

! Do not open the cabinet.

• Never open the cabinet.There is high voltage inside which can cause electrical shock.

Contact your dealer for internal inspection, adjustment and repair.

! Do not modify.

• Do not modify this projector because this could result in fire or electrical shock.

! Do not use in the bathroom.

• Do not use this projector in the bathroom because this could result in fire or

electrical shock.

h
s

i
l

g
n
E

! Do not insert objects into the projector.

*Do not insert metal objects through the ventilation openings, etc., of this projector or

drop such objects inside because this could result in fire or electrical shock.

* If a foreign object enter this projector, immediately turn off the power switch,

disconnect the power plug from the power outlet and contact your dealer.

*Continued use could result in fire or electrical shock. Use special caution in

households where children are present.

5

Multimedia LCD Projector

E
n
g
l

i
s

h

! Do not look through the lens when the lamp is on.

Never look through the lens when the lamp is on. The powerful

light could adversely affect vision. Use special caution in

households where children are present.

! Avoid shock or impact on the projector.

• If the projector fall, resulting in damage to the cabinet,

immediately turn off the power switch, disconnect the power

plug from the power outlet and contact your dealer.

• Continued use could result in fire or electrical shock.

! Do not place this projector in a container containing liquid.

Do not place flower vases, flowerpots, cups, cosmetics,

liquids such as water, etc., on top of this projector.

Warnning

! Do not use any power cable except those supplied with

the projector.

• The use of any other power cable could result in fire or electrical

shock.

! Do not shine the laser beam onto yourself or other

• The laser pointer function of projector remote control emits class II

laser beam. Do not look directly into the laser beam outlet or direct

the laser beam at other people. Vision can be impaired if the laser

beam enters the eyes. Especially pay attention if children are

present.

! High temperatures are generated when the lamp is lit; so do

not place objects in front of the lens.

6

Multimedia LCD Projector

Caution

Placing heavy objects on top of this projector could result in loss of

balance or falling and cause personal injury or damage the projector.

! Do not block the ventilation openings.

• Do not block the ventilation openings of this projector.

Blocking ventilation could lead to internal overheating which

could result in fire.

! Do not place this projector on its side during use or push it into a

small, poorly ventilated location.

• Do not place this projector on a carpet or bedding or cover it with

a tablecloth, etc. Also, when installing this projector, make sure the

ventilation openings are at least 30cm(12in)clearance around the

projector.

! Care and maintenance.For safety purposes, disconnect the power

plug from the power outlet before starting the care and

maintenance of this projector.

! Battery usage.

• Replace the batteries with the same type only. Do not mix old

and new batteries ; this could result in fire or personal injury due to

battery cracking or leakage.

• Make sure the plus and minus terminals are correctly aligned

when loading the batteries. Incorrect loading could result in

personal injury or contamination of the surroundings due to

battery cracking or leakage.

! Have the projector interor cleaned regularly. Contact your

dealer to arrange for the service. Accumulations of dust inside

the projector can result in fire or malfunction if not cleaned for an

extended period.

h
s

i
l

g
n
E

*Ask your dealer for details about internal cleaning.

7

Multimedia LCD Projector

E
n
g
l

i
s

h

Caution

!Avoid installation in humid or dusty locations.

• Do not install this projector in a humid or dusty location.

This could result in fire or electrical shock.

! Do not handle the power cord roughly.

! Keep the power cord away from heaters; the heat could melt

the power cord and cause fire or electrical shock.

!Do not touch the power plug with wet hands; this could result

in electrical shock.

! When disconnecting the power plug, do not pull on the

power cord. This could damage the power cord and cause fire or

electrical shock. Always grip the plug when disconnecting.

!When the projector is not to be used for an extended period.

If the projector is not to be used for an extended period because of

travel,etc., disconnect the power plug from the power outlet and

replace lens cover.

8

Multimedia LCD Projector

Location of product safety labels

*Safety labels are used on or within the projector to alert you to items or

areas requiring your attention.

Never look into the lens
whi le the proj ector is on.

Name card

h
s

i
l

g
n
E

9

Multimedia LCD Projector

E
n
g
l

i
s

h

Checking the Package Contents

Projector with Lens cover

Remote Control ( included battery)

Power Cord S-Video Audio/Video Cable

10

Computer cable Speaker Cable

Filter Sponge User's Manual (included CD)

Multimedia LCD Projector

Optional Contents

1. Remote control

(Type 2, with remote mouse

and Laser point function)

2. USB Mouse

( support type 2 remote control)

3. DVI Cable

4. RGB -DVI Adapter

5. YPbPr-RGB Cable

h
s

i
l

g
n
E

6. Carring Bag

7.

Filter Sponge

11

Multimedia LCD Projector

E
n
g
l

i
s

h

Part Names and Function:

Main Unit

Speaker

8. Control panel

Outlet ventilation

4.Filter cover( Bottom)

3 Fr o nt I R r ecei ve r

6 Foot adjuster button

5. Front/ Rear adjustable foot

1.Zoom ring

2. Focus ring

7. Lens cover

1. Zoom Ring

Use the Zoom Ring to adjust the size of the projected image.

Rotate the Zoom Ring until the image is the desired size.

2. Focus Ring

Use the Focus Ring to focus the projector image.

Rotate the Focus Ring until the image is clear.

12

Multimedia LCD Projector

3. Front IR receiver

When using the remote control,point the remote control at this sensor..

4.Filter cover

Prevents dust and other foreign particles from being drawn into projector.

Remove the Filter cover to clean the air filter.

5.Front / Rear adjustable foot

Extend and retract to adjust the projection angle

6.Foot adjuster button

Lock/unlock the adjustable foot.

7.Lens cover

Attach when not using to protect the lens from becoming dirty or damaged

h
s

i
l

g
n
E

8.Control panel ( key pads )

Operating system.

13

Multimedia LCD Projector

g

E
n
g
l

i
s

h

Keypad control

8. Power i ndicator

9. Lamp indicator

1.Power

2.Input source

7. Keystone

3. Blank

6. Menu-left/ri

4. Auto

ht, Menu- up/down

ESC

Enter

5. Menu

1.Power button

Power on / operation mode, Standby mode, Cooling-down mode

2. INPUT Computer source

Selects between RGB input source-

Computer 1

Computer 2/YPbPr

→ S-Video → Component Video (YcbCr)

→ Computer 2/RGB or

→ DV I → AV

3. Blank

Blanks the projected image. If the projector is left in blank mode

for more than 15 minutes, the projector will automatically shut

down.

14

Multimedia LCD Projector

4. Auto

Automatically adjusts the setting to match the current input.

5. Menu

Display or hides the OSD main menu page.

6.Menu-up /down,Menu-right / left

Selecting OSD menu item up or down /

Selecting and adjusting the function of OSD menu item

7. Keystone

Adjusts the vertical keystone with menu-right, menu-left

8.Power indicator

Lights on or flashes to indicate the operating status of the

projector(See Page 56 )

h
s

i
l

g
n
E

9. Lamp indicator

Indicate a problem in the internal projector temperature, lamp

cover or cooling down.(See Page 56)

10.ESC

Enters into last status at OSD Menu or hides the OSD Menu

15

Multimedia LCD Projector

E
n
g
l

i
s

h

Rear View / IO Board

10. Power socket

11. Power switch

12.Rear IR receiver

Inlet Ventilation

8.Audio in

Security lock

9.USB mouse connector

16

Control(RS-232C)

S-Video

5.S-Video

Monitor Out

Y Cb Cr Video L R

6.Component connector 7. Video/Audio

Com puter 2/Y Pb Pr Computer 1/DV I

USB Audio

Mouse

In

1. Computer1/ DVI connector

Input Analog / Digital RGB video signal from a computer

2. Computer2 / Y Pb Pr (Component video) connector

Analog RGB video signal from a computer or

Component Video (Y,Pb,Pr) signal form the video source .

3. Monitor out connector

Connect an external monitor to this connection view the

computer 2 input.

Multimedia LCD Projector

4. Control (RS-232C)

Serial data port for controlling the projector with a computer

or other RS-232 control device.

5. S-Video connector

S-Video signal from a video source.

6. Component Video connector ( Y,Cb,Cr)

Component video (Y,Cb,Cr) signal from a video source.

7. Audio out connector

Connecting to an external speaker system.

8. Audio in1/DVI

Stereo mini jack for PC input

h
s

i
l

g
n
E

9. USB mouse connector

Connects a USB mouse cable to a computer to control

computer mouse functions.

10. Power socket

Connects the power core to this connection.

11. Power switch

Turns the power on/off.

12. Rear IR receiver

When using the remote control, point the remote control

at this sensor.

17

Multimedia LCD Projector

E
n
g
l

i
s

h

Bottom View

Front adjustable foot

2.Air filter cover

1.Suspension bracket fixing points (3)

Front adjustable foot

Name card

T
U
P
N
I

k
n
a

+

l
B

e
n

l
l

o

i

t

t

-

s

S
y
e
K

EMI Label

3.Remote controller

1. Suspension bracket fixing points(3 points)

Install the optional ceiling mount here when suspending

the projector from the ceiling.

2. Air filter cover

Prevents dust and other foregin particles from being drawn

into the projector.

3. Remote control

Replace the remote control at the button of the projector.

18

Multimedia LCD Projector

Remote Control (Type 1)

1. Power

Power on / operation

mode, Standby mode,

Cooling-down mode

2. Esc

Enters into last

status at OSD menu

or hides the OSD menu.

3. Volume up/

down

Sound louder or lower

4. Menu

Display or hide the

OSD main menu page.

Keysto ne

Still

h
s

i
l

g
n
E

8. Auto

INPUT

-

Blank

Refresh the current image.

9. Menu down/Menu up,

Menu left/ Menu right

Selecting and adjusting

the function of OSD

menu item

+

IN PU T

10. INPUT source

Select input source:

Computer 1 → Computer 2/RGB

， Computer 2/YPbPr → DVI →

Composite Video → S- Video →

Component Video (YCbCr)。

5. Keystone

Adjusts the horizontal and vertical keystone function

S till

6. Still

Keep the current image on the screen.

Blank

7. Blank

Hide the current image, Become black screen

19

Multimedia LCD Projector

E
n
g
l

i
s

h

Remote Control Batteries Installation

1. Remove the battery cover.

2. Loading the batteries.

Make sure the plus and minus poles

are correctly oriented.

3. Close the battery cover.

Caution

Avoid excessive heat and humidity.

•

• Do not drop the remote control.

• Do not expose the remote control to water or moisture, this could result in malfunction.

• When the remote control will not be used for an extened period, remove the batteries.

• Replace the batteries when remote control operation becomes sluggish or unresponsive.

• Do not place the remote control close to the cooling fan of the projector.

• Do not disassemble the remote control. If the remote control needs service.

Please bring it to the service station.

20

Multimedia LCD Projector

Remote Control-Type 2 (optional)

1. Power

Power on / operation

mode, Standby mode,

Cooling-down mode

2. Laser Pointer

Use laser pointer

from remote control.

3. Mouse Left

Mouse left

multipurpose key.

4. Mouse Right

Mouse right

multipurpose key.

5. Menu

Display or hides the

OSD main menu page

6. Menu-up / Menu-

down

Selects OSD menu

item up or down

7. Menu-right / Menu-left

Selecting and adjusting

the function of OSD menu item

8. Keystone up / down

Adjusts the horizontal keystone function.

9. Volume up / down

Sound louder or lower

3

10

11

12

1

2

18

4

6

5

7

8

13

14

15

9

16

17

17

10.Computer source

Selects between RGB

input source —computer1,

computer2 /RGB,

computer2/Y, Pb, Pr, DVI

11. Video source

Select between Video

input source – Composite

Video,S-Video, Y Cb Cr

Video

12. Auto Sync

Refresh the current image.

13. PIP

Show picture in picture

function.

14. Blank

Hide the current image,

Become black color on

the screen

15. Still

Keep the current image

on the screen.

16.Mute

Mute audio

17.Zoom+ / Zoom-

Zoom in orZoom out

18. Point button

Select an item or adjusts

value in the On-Screen

Menu.

h
s

i
l

g
n
E

21

Multimedia LCD Projector

E
n
g
l

i
s

h

Remote Control Batteries Installation

Loading AAA batteries into the remote control.

1. Remove the battery cover.

Push the knob while lifting up the battery cover.

2. Loading the batteries.

Make sure the plus and minus poles are correctly oriented.

3. Close the battery cover.

Caution

Avoid excessive heat and humidity.

•

• Do not drop the remote control.

• Do not expose the remote control to water or moisture, this could result in malfunction.

• When the remote control will not be used for an extened period, remove the batteries.

• Replace the batteries when remote control operation becomes sluggish or unresponsive.

• Do not place the remote control close to the cooling fan of the projector.

• Do not disassemble the remote control. If the remote control needs service..

Please bring it to the service station.

22

War n i n g

The laser pointer function emits a class II laser beam. Do not look directly into the laser

beam outlet or point the laser beam at other people. Vision can be impaired by shining the

beam into the eyes.

Multimedia LCD Projector

Installation

Setting Up the Projector

The projector supports the following four different projection methods

* Front projection

* Rear

h
s

i
l

g
n
E

23

Multimedia LCD Projector

E
n
g
l

i
s

h

* Rear ceiling projection

24

* Front ceiling projection

A special method of installion is required in order to suspend the

projector from the ceiling.Please ask your dealer for details.

Multimedia LCD Projector

Screen Size and Projection Distance

The distance between the projector and screen determines the actual

image size.Refer to the table below to determine the image size at a

given distance..

1. XGA F: # 1.75

Image Size(inch) Distance(M)

30 1.17 1.40

40 1.55 1.86

50 1.93 2.32

60 2.32 2.77

80 3.08 3.69

100 3.84 4.60

200 7.66 9.17

260 9.94 11.92

h
s

i
l

g
n
E

9.94~11.92

7.66~9.17

3.84~4.60

1.17~1.40

1.55~1.86

1.93~2.32

2.32~2.77

3.08~3.69

25

Multimedia LCD Projector

Adjusting the Image Position

Use the adjustable feet at the front of the projector to set the image height.

Rotate the adjustable feet at the rear of the projector to fine-tune the image

position.

h
s

i
l

g
n
E

*When the feet are adjusted, it may cause the shape of the projected images

to become distorted. Use the keystone correction function to correct this

distortion.

*To retract the front adjustable feet, keep press the feet release button. The

front adjustable foot will slowly retract inside the projector.

26

Multimedia LCD Projector

E
n
g
l

i
s

h

Moving the projector

1.Use the carrying bag when moving the projector.(option)

2.Replace the lens cover and retract the front adjustable foot when

moving the projector to prevent damage to the projector.

Caution

The optional carry bag is intended to protect the projector from dust

and scratches on the surface of the cabinet. It is not designed to protect

the projector from external shock.

Do not transport the projector in an unsuitable transport case by using

a courier or transport service. This may cause damage to the

projector.

27

Carrying bag

(Optional , please contact BOXLIGHT for more information)

Multimedia LCD Projector

How to Connect

Desktop PC

Before starting, make sure that the projector and computer are both

turned off.

1. Connect the computer cable.

1.1 Connect either end of the computer cable to the projector’s

computer 2 / Y Pb Pr input port.

1.2 Disconnect the monitor cable from the computer and connect

the other end of the terminal where the monitor cable is

disconnected from the computer.

1.3 If needed, connect the monitor cable of the computer monitor

to the projector’s Computer out.

1.4 Tighten the screw on all connectors.

Desktop PC

h
s

i
l

g
n
E

1.

2.Connect the audio cable if necessary.

2.1 Connect one end of the audio cable to the Audio in 2 jack on

the projector.

2.2 Connect the other end of the audio cable to the audio output on

the computer sound card.

28

Multimedia LCD Projector

E
n
g
l

i
s

h

Laptop PC

PC laptop computer

Before beginning, make sure that the projector and laptop are both

turned off.

1. Connect the computer cable.

1.1 Connect either end of the computer cable to the projector’s

computer 2 / Y Pb Pr input port.

1.2 Connect the other end of the project cable to the monitor out

connection on the laptop.

1.3 Tighten the screw on all connectors.

29

Laptop PC

1.

2.Connect the audio cable if necessary.

2.1 Connect one end of the audio cable to the Audio in 2 jack on

the projector.

2.2 Connect the other end of the audio cable to the audio output

port on the laptop PC.

Multimedia LCD Projector

PC desktop computer (DVI-I port)

before beginning, make sure that the projector and computer are both

turned off.

1. Connect the computer DVI cable.(optional)

1.1Connect either end of the DVIcable to the projector’s computer

1 input port.

1.2 Disconnect the monitor cable from the computer and connect

the other end of the terminal where the monitor cable is discon-

nected from the computer.

1.3 Tighten the screw on all connectors.

Desktop PC

h
s

i
l

g
n
E

1.

2.Connect the audio cable if necessary.

2.1 Connect one end of the audio cable to the Audio in 1jack on the

projector.

2.2 Connect the other end of the audio cable to the audio output port

on the computer.

30

Multimedia LCD Projector

E
n
g
l

i
s

h

USB Mouse

USB mouse compatible MS-Window98/2000/NT/XP/Me,

Macintosh :OS8.6~10.1, and a Microsoft Mouse driver installed.

1.Insert the end of the USB Cable (B-Type) to the projector’s USB port.

2.Connect the end of the USB Cable (A-type) to the computer’s USB

port.

3.When the projector and computer are turned on, the appropriate

drivers should load automatically.

31

USB,A-type

USB,B-type

Multimedia LCD Projector

V ideo

A. Connect to a video source

The Projector can receive composite Video/stereo-audio, S-Video or Component

video(YCbCr) signals.

1. The composite video and stereo-audio inputs are yellow, white and red RCA

connect on the projector. Connect the yellow RCA plug at one end of the video/stereo-

audio cable to the yellow video jack. Connect the other yellow RCA plug to the video-

out jack on the video source.

2. The red and White connections are audio connectors. To use the projector speakers

connect the audio cable between the projector and the audio source as shown below.

2.1. Insert the write plug into the L-Jack and red plug into the R-Jack.

2.2. Connect the other end of the cable to the output jacks of the audio source.

Video

h
s

i
l

g
n
E

3. For the S-Video, insert one end of the S-Video cable into the

projector’s S-Video jack. Insert the other one end in the S-Video out

jack on your S-Video source.

Video

32

Multimedia LCD Projector

E
n
g
l

i
s

h

4. For the Component video(Y,Cb,Cr) input uses the green, red, and blue RCA

connections on the back of the projector. Connect the green RCA plug at one

end of the component video cable to the projector’s Y Jack( green color).

Connect the blue RCA plug at one end of the component video cable to the

projector’s Cb jack (blue color). Connect the red RCA plug at one end of the

component video cable to the projector’s Cr Jack(red color).

Note : When using the S-Video or Y, Cb, Cr input, connect the video/stereo-

audio cable to the red and white R and L jack on the projector: Insert the red

RCA plug to the right channel and white RCA plug to the left channel.

Video

B.Connect to a Component Video(RGB) source

The Projector can receiver Component Video(RGB) signals.

1. Use the optional HD15/component video cable to connect the video

source to the Computer 2/ Y,Pb,Pr connector at the rear of the

projector.

Note : for RGB Video’s audio sound, connect the video/stereo-audio

cable to the projector’s R jack and L jack :

insert the red RCA plug to the right channel and white RCA plug to the

left channel.

Video

33

Multimedia LCD Projector

Basic Operation

Turning on the projector

Procedure

1. Check the power is turned off for the projector and all components

connected to the projector.

2. Remove the lens cover.

3. Connect the power cord to the projector.

4. Turn on the power switch.

5. Press the

control.

button on the control panel or [POWER] button on the remote

5.

.

3

.

4

INP U T

+

-

Keystone

Still

Blank

h
s

i
l

g
n
E

2.

34

Multimedia LCD Projector

E
n
g
l

i
s

h

6.The power indicator will flash green .

7.Press the [ VIDEO]/[PC] button on the control panel or the Computer/

Video buttons on the remote controller to select the appropriate source.

8.Using the zoom ring to adjust the screen size.

35

9.Using the focus ring to adjust the focus.

Multimedia LCD Projector

Adjust the Screen Image

1.Adjusting the image size

Turn the zoom ring on the projector to adjustor to adjust the image

2.Adjusting the image height.

Extend or retract the front adjustable foot to adjust the height of the

image.

3.Correcting Keystone Distortion

Using the [

*Correcting vertical keystone distortion

Keystone]button on the projector’s control panel.

Enter

h
s

i
l

g
n
E

36

Multimedia LCD Projector

E
n
g
l

i
s

h

Turning off the projector

1. Press the button on the projector or remote control. The power

off confirmation message appears. If you do not want to power off the

projector, ignore the message and it will disappear.

2. Press the power button again and the projector will enter cool-down

mode. The lamp shuts off, the lamp indicator flashes red, and the fans

continue to run for approximately two minutes. During the cool down

sequence the projector will not respond to any control panel or remote

control buttons.

37

Caution: Do not set the power switch to off or unplug the projector during the

cool down sequence. Not allowing the lamp to cool properly will greatly reduce

the life of the lamp.

3.After the cool-down sequence is complete the fans will shut off and

the lamp indicator will stop flashing. The projector is now in standby

mode and can be turned back on with the remote control or control

panel. If the projector will not be used for an extended period, set the

power switch to off and disconnect the power cord.

**The projector will auto turn off when stay in“ no signal” status over

15 minutes.

Multimedia LCD Projector

Functions of Menu(OSD)

Keypad Operating:

2. 4. 7. 8.

Enter

1. 3. 5. 6. 9.

1. : Turn on and turn off the projector

2. BLANK : Blanks the projected image. If the projector is left in Blank

mode for more than 15 minutes, the projector will automatically

shut off the lamp and enter cool-down mode.

3. INPUT : Selects VIDEO or PC input source.

4. :Adjusts the vertical keystone with the right and left arrow buttons.

5. AUTO : Automatically adjusts the setting to match the current input.

6. : Up / Down arrow button, used to navigate through the OSD Menus.

7. : Right / Left arrow button, used to select and adjust OSD Menu

functions and Volume

8. ESC: Exit the menu

9. MENU: Enter or exit the main menu (Show and hide the OSD)

h
s

i
l

g
n
E

** There is a “ quick Key” on the remote control and projector keypad

as well.

*Press the “ Volume” button on remote control you can adjust value

and select between Brightness- Contrast-Keystone-Volume directly.

There is the same function for pressing the button on the

keypad.

38

Multimedia LCD Projector

_

_

_

_

_

E
n
g
l

i
s

h

PC Mode

brightness -123-

contrast -123-

color temp 6500 7300 9300 user

R

user red -123-

G

user green -123-

user blue -123-

B

1. PICTURE

Brightness -6 4 /+ 63 Adjusts the o verall image brightness

Contrast -64/+63 Adjusts the difference between light and dark

C o lor Temp Ad justs the co lor temp erature o f the image

6500K
7300K
9300K

User

User Red

User Green
User Blue

areas of the image

Sets co lor te mp erature to 6 500K
Sets color temperature to 7300K
Sets color temperature to 9300K
Enable the separate User color temperature
adjustmens of each RGB color

-128/+127

-128/+127

-128/+127

+

+

+

+

+

39

_

_

_

Volu me -12 -

Multimedia LCD Projector

+

h
s

i
l

g
n
E

base -12 -

tre bl e -12-

mut e off on

2. AUDIO

Volume 0/+31 Ad justs the volume

Base -8/+7 Ad justs the base tone

Treble - 8 /+ 7 A d justs the tre b le to ne

M ute O n/O ff M utes the volume o n/o ff

+

+

40

Multimedia LCD Projector

_

_

_

_

_

_

E
n
g
l

i
s

h

h position -123-

v position -123-

phase -123-

frequency -123-

keystone V -123-

keystone H -123-

aut o sync exectue

aut o se arch off on

3. SETTING

H position -128/+127 Move the image position horizontally

V position -128/+127 Move the image position vertically

Phase -128/+127 Set the synchronization polarity

Frequency 1294/1394 Set the horizontal scanning frequency

Keystone V -128/+127 Corrects vertical keystone distortion in image

Keystone H -128/+127 Corrects horizontal keystone distortion in image

Auto sync Execute Sets all o f the above setting automatically

Auto search on/off Search signal source automatically.

+

+

+

+

+

+

41

Multimedia LCD Projector

zoom/pan execute

sti ll off on

bla nk off on

reset all execute

re siz e 4:3

language English

select so urce exec ute

Com puter 2 Mode RGB

h
s

i
l

g
n
E

select so u rc e

computer 1

computer 2(RGB)

computer2(Y,Pb,Pr)

DVI

video

s-video

Y Pb Pr

42

Multimedia LCD Projector

E
n
g
l

i
s

h

4.ADVANCE

Zoom/ pan Execute Enlarge or reduce the size of the image, pan an image

Still On/off Freezes the current image on the screen

Blank O n/off Hides the image, displays a blank, black screen*(see

Reset all Exec ute R esets all O S D M enu functions to their fa ctory

Langua ge Eng S elect the language that the O S D M e nu and on

Select source Select the input source from:

Computer2

mode

*Blank on

If the projector is left in Blank mode for more than 15 minutes, the projector will

automatically shut off the lamp and enter cool-down mode.

*Reset all

1. After you press [reset all] of the OSD menu, the following confirmation message

will appear on the screen.

RGB/Y,-

Pb,Pr

to view images that are larger than the display area

below)

default values*( see below)

screen massage are displayed in English/ Chinese(s)/
Chinese(t)/ Italian / Spanish/ French /German

Computer1/ Computer2(RGB) / Computer2
(Y,Pb,Pr)/ DVI / video / s-video / Y,Cb,Cr

Switches computer2 input: RGB / Y,Pb,Pr

43

2. Please press the Menu-right button on the remote control or button on the

keypad to reset the OSDMenu values. Please ignore the message to exit the message

without changing any setting.

PIP size off 1 2 3

_

_

_

_

_

PIP Source

brightness -123-

contrast -123-

sharpness -123-

color -123-

tint -123-

Multimedia LCD Projector

+

+

+

+

+

h
s

i
l

g
n
E

5. PIP

PIP size Off 123 Sets the PIP image size

PIP Position 9-position Moves the PIP image position

PIP source AV,S,YPbP r Selects the PIP input source

PIP brightness -64/+63 Adjusts the brightness of the PIP image

PIP contract -64/+63 Adjusts the difference between light and dark

PIP sharpness -128/+127 Adjusts the image sharpness of the PIP image

PIP color -128/+127 Adjusts the color intensity of PIP image

PIP tint -128/+127 Adjusts the tint of the PIP image

areas of PIP image

44

Multimedia LCD Projector

E
n
g
l

i
s

h

45

6. PRES EN TATION

Auto ceiling On/off

Front Execute Normal projection mode

Ceiling Execute Inverts the image vertically,used when the projector is

Rear Excute Inverts the image horizontally, used when projecting

Celing and
Rear

La mp mo d e No rmal

La mp timer La mp timer

Automatically

Excute Inverts the image horizontally and vertically, used when

Economic

Automatically inverts the image when the projector is
turned upside down i.e. when the projector is
mounted on the ceiling

mounted upside d own

onto a rear projection screen

the projector is mounted upside down and projecting
onto a rear projection screen

Economic mode reduces the lamp brightness
economic to extend lamp life and quiet the projector

Multimedia LCD Projector

_

_

_

_

_

_

Video Mode

brightness -1 2 3 -

con trast -1 2 3 -

sharpness -123-

colo r

tin t

colo r te m p 6 5 0 0 7300 9 3 0 0 user

user red -1 2 3 -

R

user green -1 2 3 -

G

user blue -1 2 3 -

B

1. PICTURE

Brightness -64/+63 Adjusts the overall image brightness

Contrast -64/+63 Adjusts the difference between light and dark areas

Sharpness -128/+127 Adjusts the image sharpness

Co lor -64 /+6 3 Adjusts the image co lor

Tint -64 /+6 3 Adjusts the image tint

Color Temp Adjusts the color temperature of the image

6500K
7300K
9300K

User

User Red

User Green
User Blue

-1 2 3 -

-1 2 3 -

_

_

of the image

Sets color temperature to 6500K
Sets color temperature 7300K
Sets color temperature 9300K
Enable the separate User color temperature
adjustmens of each RGB color

-128/+127

-128/+127

-128/+127

+

+

+

+

+

+

+

+

h
s

i
l

g
n
E

46

Multimedia LCD Projector

_

_

_

E
n
g
l

i
s

h

Volu me -12 -

base -12 -

tre bl e -12-

mut e off on

2. AUDIO

Volume 0/+31 Adjusts the volume

Base -8/+7 Adjusts the base tone

Treble -8/+ 7 A d justs the tre b le tone

Mute On/O ff Mutes the volume on/off

+

+

+

47

h position -123-

_

_

_

_

_

v position -123-

phase -123-

frequency -123-

keystone V -123-

keystone H -123-

aut o sync exectue

aut o se arch off on

_

Multimedia LCD Projector

+

+

+

+

+

+

h
s

i
l

g
n
E

3. SETTIN G

H position -128/+127 Move the image position horizontally

V position -128/+127 Move the image position vertically

Pha se -12 8 /+ 127 Se t the sync hro nization p olarity

Freq uency 12 9 4/1394 Se t the horizontal sca nning frequency

Keysto ne V -12 8 /+ 127 Corre cts vertica l keystone distortion in image

Keysto ne H -12 8 /+ 127 Corre cts horizonta l keystone distortion in image

Auto sync Execute Sets all of the above setting automatically

Auto search on/off Search signal source automatically.

48

Multimedia LCD Projector

E
n
g
l

i
s

h

zoom/pan execute

sti ll off on

bla nk off on

reset all execute

re siz e 4 : 3

language English

select so urce exec ute

Com puter 2 Mode RGB

49

select sou rce

computer 1

computer 2(RGB)

computer2(Y,Pb,Pr)

DVI

video

s-video

Y Pb Pr

Multimedia LCD Projector

4.ADVAN CE

Zoom/ pan Execute Temporarily enlarge a portion of the image and

Still On/o ff Freezes the current image on the screen

Blank O n/off H ides the image, displays a blank, black

Reset all Execute Resets all O S D M enu functions to their factory

La nguage E ng S elect the langua ge tha t the O S D M enu a nd o n

Select source Select the input source from:

Computer2
mode

RGB/Y,Pb,-PrSwitches computer2 input: RGB / Y,Pb,Pr

view portions of the image that are not visible in the
display area.

screen*(see below )

default values*( see below)

screen massage are displayed in English/
Chinese(s)/ C hinese(t)/ Italian / Spanish/ F rench
/Ger ma n

Computer1/ Computer2(RGB) / Computer2
(Y,Pb,Pr)/ D VI / vid eo / s- video / Y,C b ,C r

*Blank on

If the projector is left in Blank mode for more than 15 minutes, the projector will

automatically shut off the lamp and enter cool-down mode.

*Reset all

1. After you press [reset all] of the OSD menu, the following confirmation message

will appear on the screen.

h
s

i
l

g
n
E

2. Please press the Menu-right button on the remote control or button on the

keypad to reset the OSDMenu values. Please ignore the message to exit the message

without changing any setting.

50

Multimedia LCD Projector

E
n
g
l

i
s

h

51

6. PRES EN TATION

Auto ceiling On/off

Front Execute Normal projection mode

Ceiling Execute Inverts the image vertically,used when the projector is

Rear Excute Inverts the image horizontally, used when projecting

Celing and
Rear

La mp mo d e No rmal

La mp timer La mp timer

Automatically

Excute Inverts the image horizontally and vertically, used when

Economic

Automatically inverts the image when the projector is
turned upside down i.e. when the projector is
mounted on the ceiling

mounted upside d own

onto a rear projection screen

the projector is mounted upside down and projecting
onto a rear projection screen

Economic mode reduces the lamp brightness
economic to extend lamp life and quiet the projector

Multimedia LCD Projector

Maintenance and Troubleshooting

Cleaning the projector

Warning: Always unplug the projector before performing any

maintenance.

Clean the projector case by wiping it gently with a soft cloth.

If necessary, the case can be cleaned using a neutral detergent and a soft

cloth ensoure the case is complete dry before turning the projector back

on.

Cleaning the lens

Use a commercially-available air blower, or use a lens cleaning paper

and lens cleaner approved for use on optical coatings.

h
s

i
l

g
n
E

Do not clean the lens with harsh materials or subject the lens to shock, as

it can easily become damaged.Close the lens cover when the projector

not in use.

52

Multimedia LCD Projector

E
n
g
l

i
s

h

Cleaning the Air Filter

A.When the air filter becomes clogged with dust, etc., the projector

power may overheat and turn itself off to prevent internal damage.

When cleaning the filter, stand the projector up on its side to prevent

dust from entering the projector. Use a vacuum to remove the dust from

the outside of the air filter. Do not operate the projector with the air

filter removed.

B.Clean the air filter every 100- hours .

53

*If the filter difficult to clean or if it is deteriorating, it should be

replaced

1.Remove the filter cover on the bottom of projector.

2.Pull out the air filter.

3.Installing the new air filter.

1. 2.

Multimedia LCD Projector

Lamp Replacement

When the life of the projector lamp of this projector draws to an end, the

projector would give a signal to remind you to replace the lamp with a

new one promptly.In order to maintain the lamp work efficiently

Caution: Need to cool- down the projector at lease 15 minutes

before you open the lamp cover. And make sure the projecoter is

swiched off.

Lamp cover

Follow these steps to replace the lamp.

1. Turn over the projector. Loosen the screw and

remove the lamp cover.

2. Loosen 2 screw of the lamp and pull out the

lamp.

3. Replace the lamp with a new one and tighten the 2 screws back into position.

Make sure that the lamp is set properly. Replace the lamp cover and tighten the

screw.

h
s

i
l

g
n
E

Caution: Do not drop a lamp or touch a glass bulb! The glass can shatter and

may cause injury.

Note: 1. If the customer open the lamp cover when the projector is on, the lamp will

switch off automatically.

2. If the customer replace the new lamp incorrectly, the lamp would not

work properly.

54

Multimedia LCD Projector

E
n

Indicators

g
l

i

The Power and lamp indicators show the status of the projector. Before requesting

s
h

repair, check the projector status using the chart below. If the problem cannot be

resolved contact your dealer

Power (Green)

Slow flashing

Lamp(Red)

Off

Conditions

Stand by mode

SignalNotes

* Projector is ready to be turned on (normal)

On

On

On

Fast flashing

Fast flashing

Symptom P ossible cause Remedy

The powe r is
not turned o n

No Video or
audio

No audio *The projector is not correctly connected.

No image *The projector is not correctly connected. * Connect correctly

Image are dark *Brightness and contrast are not correctly

Video is
burned

Off

Slow flashing

Fast flashing

On

Fast flashing

*The main power switch is not turned on.
*The power cord is disconnected.

*T he input is not c orrec tly co nnec ted .
*No signal input

*T he vo lume is se t to minimum.
*Mute is turned on

adjusted.
*T he lamp is ne aring the end o f its
service life

*Focus orRGB phase is out of adjustment *Adjust the focus phase.

On mode

Cool-down

mode

Fan-fault mode

Lamp-cover

open

High

temperature

*Projector is on and operating normally

*Projector is in cool-down mode and will not

respond to user imput (normal)

* The projector has detected a problem with an

internal fan, the lamp will shut off automatically,

contact your dealer.

*The lamp cover is open or there is a problem

with the lamp. If the lamp door is closed and

replaceing the lamp dose not correct the issue,

contact your dealer

*The projector has overheated and shut the lamp

off. Correct the over temp condition immediately.

1. Check that the ventilation slots are free from

obstructions.

2. If the condition persists, contact your dealer.

3. Check the cleanliness of the air filter.

*Turn on the main power switch.
*Plug the power cord into an AC power outlet.

*S elect the ap p rop riate input so urc e
*Co nnect corre ctly

*Co nnect corre ctly.
*P ress V O LU M E+ o n the remote co ntrol or display

the menu screen and adjust the volume.

*P re ss theM UT E b utto n.

*A d just the se tting of C om pute r

mode in the OSDMenu.

*Replace with a new lamp.

55

Multimedia LCD Projector

List of Supported Monitor Displays

Signal Refre sh Rate

(Hz)

VGA 70 640X350

VGA 60 640X480

VGACGA 60 640X400

VGA text 720X400

VESA 720X350

VESA 60/72/75/85 640X480

SVGA 56/60/72/75/85 800X600

XGA 60/70/75/85 1024X768

SXGA 60/70/75 1280X1024

TV(480 i),NTSC 60

TV(575i),PAL 50

Resolution

h
s

i
l

g
n
E

SDTV(480p) 60

HDTV(720p) 60 1280X720

HDTV(1080i) 30 1920x1080

Mac13 67 640X480

Mac16 75 832X824

Mac19 75 1024X768

56

Multimedia LCD Projector

Specification

E
n
g
l

i
s

h

Projection Display

Resolution

Projection Lens

Epson0.7” Poly Silicon TFT LCDx3

True XGA, 1024x768

Manual,F#1.75~2.10,f=26.7~32.0mm

Image Size

Projection distance

Uniformity

Color Temperature

Scanning Frequency

Video Compatibility

Computer Compatibility

Inputs/Outputs

Power Consumption

Power Supply

Installation

Dimension(WxHxD)

Weight

Operation Temperature

Storage Temperature

Operation Humidity

Digital Keystone Correction

Aspect Ratio

30”~260”

1.25~8.8m(4.1~28.9’)

Typical 85% image center-to-corner

6400 K~ 6800K

Horizontat 15~100kHz, V-syns.43~120Hz

NTSC,PAL,SECAM,HDTV 1080i/720P/480P

SXGA,XGA,VGA,MAC

Computer: x1 DVI

Computer : x1 Mini D-sub 15pin

Monitor out: x1 Mini D-sub 15pin

Audio in 1 : x1 mini jack

Control(RS-232)

S-Video : x1 Mini D N 4pin

Video: x1 RCA pin Jack

Mouse: x1 USB connector(B-type)

Component x1 RCA pin jack

270Watts / 250Watts

350W fully range from 100V~240V 50/60Hz

Front/Rear/Ceiling

278x104x294mm

3.2kg

+5~+35 degree

-10~+60 degree

20~80%RH

+-15 degree(H/V)

4:3 (support16:9)

57

Multimedia LCD Projector

LIMITED WARRAN TY

Boxlight (“Boxlight”) war ran that each CP-740e or CP-730e (“the Product”) sold

h ereun der will con for m to an d fun ction in accor dan ce with the wr itten specification s of
Boxlight. Said limited war r anty sh all apply only to the first per son or en tity th at
purchases the Product for personal or business use and not for the purpose of distribu­tion or resale. Said w arranty shall continue for a period of two (2) years from the date
of such purchase. The standard limited warranty excludes the lamps in projectors after
120 days or 500 hours (whichever comes first) and the accessories after one year.
Boxlight does not warrant that the Product will meet the specific requirements of the
first person or entity that purchases the Product for personal or business use.
Boxlight’s liability for the breach of the foregoing limited warranty is limited to the
repair or replacement of the Product or refund of the purchase price of the Product, at
Boxlight’s sole option. Replacement Product may be re-furbished in “like-new”
condition, at Boxlight’s sole discretion. To exercise the Purchaser’s rights under the
foregoing warranty, the Product must be returned at the Purchaser’s sole cost and
expense, to Boxlight or to any authorized Boxlight service center provided, and the
Product must be accompanied by a written letter explaining the problem and which
includes (i) proof of date of purchase; (ii) the dealer’s name; and (iii) the model and
serial number of the Product. When sending your unit in for repair, please ship your
unit in its original packing material or a Boxlight approved ATA Shipping Case, or
have a professional packaging company pack the unit. Please insure your shipment for
its full value. A return au thorization number, issued by the Boxlight customer

service department, mus t also be clearly displayed on the outside of the shipping
carton containing the Product.

h
s

i
l

g
n
E

WAR RANTY LIMITATI ON AND EXCLUSION

Boxlight shall have no further obligation under the foregoing limited warranty if the
Product has been damaged due to abuse, misuse, neglect, accident, unusual physical or
electrical stress (unusual physical and electrical stress includes unusually long
operation, exposure to smoke and other airborne contaminants), unauthorized
modifications, tampering, alterations, or s ervice other than by Boxlight or its autho­rized agents, causes other than from ordinary use or failure to properly use the Product
in the application for which said Product is intended.

58

Multimedia LCD Projector

DISCLAIMER OF UNSTA TED WARRANTIES

THE WARRANTY PRINTED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS

E
n
g
l

i
s

h

PURCHASE. ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MER-CHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. THERE ARE NO WARRANTIES
THAT EXTEND BEYON D THE FACE HEREOF AND THE FOREGOING WARRANTY
SHALL NOT BE EXTENDED,
ALTERED OR VARIED EXCEPT BY WRITTEN INSTRUMENT SIGNED BY BOXLIGHT.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WAR-

RANTY MAY LAST, SO SUCH LIMITATIONS MAY NOT APPLY TO YOU.

LIMITATION OF LIABILITY

IT IS UNDERSTOOD AND AGREED THAT BOXLIGHT’S LIABILITY WHETHER IN
CONTRACT, IN TORT, UNDER
ANY WARRANTY, IN NEGLIGENCE OR OTHERWISE SHALL NOT EXCEED THE
RETURN OF THE AMOUNT OF
THE PURCH ASE PRICE PAID BY PURCHASER AND UNDER NO CIRCUMSTANC ES
SHALL BOXLIGHT BE LIABLE
FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOST
PROFITS, LOST REVENUES OR LOST SAVINGS. THE PRICE STATED FO R THE
PRODUC T IS A CONSIDERATION IN LIMITING BO XLIGHT’S LIABIL-ITY. NO
ACTION, REGARDLESS OF FORM, ARISI NG OUT OF THE AGREEMENT TO PUR­CHASE THE PRODUCT MAY BE BROUGHT BY PURCHASER MORE THAN ONE YEAR
AFTER THE C AUSE OF ACTION HAS AC CRUED. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL O R CONSEQUE NTIAL DAM-AGES SO
THE ABOVE LIMITATION O R EXCLUSION MAY NOT APPLY TO YOU. THIS LIMITED
WARRANTY GI VES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE
OTHER RIGHTS WHI CH VARY FROM STATE TO STATE.

59