BOXLIGHT Beacon CP720e Owner's Manual
Multimedia LCD Projector
Digital Multimedia Projector
About User’s manual
Thank you for purchasing the LCD projecto r.
Please read this user’s manual thoroughly to ensure
correct usage of the projector and its features.
After reading, store this instruction manual in
a safe place for future reference.
Features
1. Design with 3LCD optical system, provide you:
Bright image, natural color, smooth video playback
and gentle for your eyes.
2. Support Dynamic Contrast and 3D Comb Filter,
great for home theater use.
3. Auto V keystone function, +/- 30 de grees.
4. Auto brightness control .
5. Auto ceiling function.
6. Support YPbPr signal.
The content of this manual is subject to change without period notice.
All rights reserved.
-1-
Downloaded From projector-manual.com Boxlight Manuals
Multimedia LCD Projector
Table of Contents
Safety Instructions………………………………………………………04
Checking the Package Content….…………...……………………...….10
Before Use
Names and Function of Each Part
Main Unit.................................................………………………….…..11
Keypad Control ...............……......................………………………… 13
Rear View I/O Board ..............................… …………..….……………15
Bottom View........................................………………………….…......17
Remote Control….....................................……………………….…….18
Inserting the batteries ............ ............................………………………19
Remote Control….....................................……………………….…….20
Inserting the batteries ............ ............................………………………21
Installation
Setting up the projector………………………………………….……..22
Screen size and projection distance…………………………...……….24
Adjusting the image position..………….………………………….…..25
Moving the projector………………………………………...…………26
How to connect
Desktop PC.............................……….........……………………........…27
Laptop PC............................. ........……………………………......... ... ... 28
USB Mouse............................……...………………………...................29
Video.......................................……………………………....................30
-2-
Downloaded From projector-manual.com Boxlight Manuals
Multimedia LCD Projector
Basic Operation
Turning on the projector………………………………..…….………..31
Adjusting the screen image……………….……………………...…….33
Turning off the power…………….………………………………...….34
Function of Menu (OSD)
Keypad operating…………………………………………..…………..35
Computer mode……………………………………………..……….…36
Video mode………………….……………………………..…………..42
Maintenance and Troubleshooting
Ceiling Mounted Installation Guide……………………………………48
Cleaning the Projector/Lens……...………………….……..…………..49
Cleaning air filter…………………………………….…..….…………50
Lamp replacement………….……………………….……………….…51
Indicators…………………………………….…………….….………..52
List of Support Displays Modes…………………………..………..……53
-3-
Downloaded From projector-manual.com Boxlight Manuals
Multimedia LCD Projector
Various symbols are used in this instruction manual and on the product
itself to ensure correct usage, to prevent danger to the users and others,
and to prevent property damage. The meanings of these symbols are
described below. It is important that you read these descriptions
thoroughly and fully understand the contents.
About the symbols
Warning
This symbol indicates information that, if ignored, could
possibly result in personal injury or even death.
Caution
This symbol indicates information that, if ignored, could
result in personal injury or physical damage.
This symbol indicates an additional warning (including
cautions). An illustration is provided to clarify the contents (for
example: the illustration to the left indicates danger of electrical
shock).
This symbol indicates a prohibited action. The contents will be
clearly indicated in an illustration or description near the symbol (for
example: the symbol to the left indicates that disassembly is
prohibited).
This symbol indicates a compulsory action. The contents will
be clearly indicated in an illustration or description near the symbol
(for example: the symbol to the left shows that the power plug should
b
e disconnected from the power outlet).
Typical Symbols
-4-
Downloaded From projector-manual.com Boxlight Manuals
Multimedia LCD Projector
If a problem should occur
If smoke or strange odors arise, continued use could result in fire
or electrical shock. In such case, immediately turn off the power
switch and then disconnect the power plug from the power outlet.
After making sure that the smoke or odor has stopped, contact
your dealer for repairs. Never attempt to make repairs yourself
because this is dangerous.
Do not use this projector if there is no image or sound, or if the
sound is distorted. Continued use could result in fire or electrical
shock. In such case, immediately turn off the power switch;
disconnect the power plug from the power outlet and contact your
dealer.
If water should enter the inside of this projector, immediately turn
off the power switch, disconnect the power plug from the power
outlet and contact your dealer.
Do not install on an unstable surface. Do not install this projector
on an unstable surface such as a wobbly stand or incline because this
could result in the projector falling and causing injury.
Do not open the cabinet. Never open the cabinet. There is high
voltage inside which can cause electrical shock. Contact your dealer
for internal inspection, adjustment and repair.
Do not modify. Do not modify this projector because this could result
in fire or electrical shock.
Do not use in the bathroom. Do not use this projector in the
bathroom because this could result in fire or electrical shock.
Do not insert objects into the project.
Do not insert metal objects through the ventilation openings, etc.,
of this projector or drop such objects inside because this could
result in fire or electrical shock.
If a foreign object should enter this projector, immediately
turn off the power switch, disconnect the power plug from the
power outlet and contact your dealer.
Continued use could result in fire or electrical shock. Use special
caution in households where children are present.
Warning
-5-
Downloaded From projector-manual.com Boxlight Manuals
Multimedia LCD Projector
Do not look through the lens when the lamp is on. Never
look through the lens when the lamp is on. The powerful light
could adversely affect vision. Use special caution in
households where children are present.
Avoid shock or impact on the projector.
If the projector should fall, resulting in damage to the
cabinet, immediately turn off the power switch, disconnect
the power plug from the power outlet and contact your
dealer.
Continued use could result in fire or electrical shock.
Do not place this projector in a container containing
liquid. Do not place flower vases, flowerpots, cups,
cosmetics, liquids such as water, etc., on top of this
projector.
Do not use any power cable except those supplied with the
projector. The use of any other power cable could result in
fire or electrical shock.
Do not shine the laser beam onto yourself or other.
The laser pointer function of projector remote control emits
class Ⅱlaser beam.
Do not look directly into the laser beam outlet or direct the
laser beam at other people. Vision can be impaired if the
laser beam enters the eyes. Especially pay attention if
children are present.
High temperatures are generated when the lamp is lit; so
do not place objects in front of the lens.
Warning
-6-
Downloaded From projector-manual.com Boxlight Manuals
Multimedia LCD Projector
Placing heavy objects on top of this projector could result in loss
of balance or falling and cause personal injury or damage the
projector.
Do not block the ventilation openings.
Do not block the ventilation openings of this projector.
Blocking ventilation could lead to internal overheating which
could result in fire.
Do not place this projector on its side during use or push it
into a small, poorly ventilated location.
Do not place this projector on a carpet or bedding or cover
it with a tablecloth, etc. Also, when installing this projector,
make sure the ventilation openings are at least 30cm(12in)
clearance around the projector.
Care and maintenance. For safety purp oses, disconnect the
power plug from the power outlet before starting the care and
maintenance of this projector.
Battery usage.
Replace the batteries with the same type only. Do not
mix old and new batteries; this could result in fire or
personal injury due to battery cracking or leakage.
Make sure the plus and minus terminal s are correctly
aligned when loading the batteries.
Incorrect loading could result in pe rsonal injury or
contamination of the surroundings due to battery cracking
or leakage.
Have the projector interior cleaned regularly.
Contact your dealer to arrange for the service.
Accumulations of dust inside the projector can result in fire or
malfunction if not cleaned for an extended period.
Ask your dealer for details about internal cleaning.
Caution
-7-
Downloaded From projector-manual.com Boxlight Manuals
Multimedia LCD Projector
Avoid installation in humid or dusty locations. Do not
install this projector in a humid or dusty location. This
could result in fire or electrical s hock.
Do not handle the power cord roughly.
Keep the power cord away from heaters; the heat could
melt the power cord and cause fire or electrical shock.
Do not touch the power plug with wet hands; this could
result in electrical shock.
When disconnecting the power plug, do not pull on the
power cord. This could damage the power cord and cause fire
or electrical shock. Always grip the plug when disconnecting.
When the projector is not to be used for an extended
period. If the projector is not to be used for an extended
period because of travel, etc., disconnect the power plug from
the power outlet and replace lens cover.
Caution
-8-
Downloaded From projector-manual.com Boxlight Manuals
Multimedia LCD Projector
Location of product safety labels
Safety labels are used on or within the projector to alert you to items or
areas requiring your attention.
WARNING
R
LCD Projector
Model:
Input:
LCD Projector
Model:
Input:
Business cardBusiness card
-9-
Downloaded From projector-manual.com Boxlight Manuals
Multimedia LCD Projector
Checking the Package Contents
□Projector
□Remote Control
( included battery)
Keyston e
Still
INPUT
ESC
Auto
MENU
Blank
□Remote Control
( included battery)
□S-Video
□Power Cord □Video Cable
□Audio Cable
□Speaker Cable
□Computer cable
□ Filter Sponge
□RS232 (Optional)
□USB Cable
□Quick Start Guide
(included CD)
Quic
k S
tar
t
Guide
□Carrying Bag
Optional
-10-
Downloaded From projector-manual.com Boxlight Manuals
Multimedia LCD Projector
3. Front IR receiver
When using the remote control, point the remote control at this sensor.
4.Filter cover
Prevents dust and other foreign particles from being drawn into projector.
Remove the Filter cover to clean the air filter.
5.Front adjustable foot
Extend and retract to adjust the projection angle
6.Foot adjust button
Lock/unlock the adjustable foot.
7.Lens cover
Attach when not using to protect the lens from becoming dirty or damaged.
8.Control panel (key pads)
Operating system.
-12-
Downloaded From projector-manual.com Boxlight Manuals
Multimedia LCD Projector
Part Names and Function:
Main Unit
1.Zoom Ring
8.Control panel8.Control panel
5.Speaker
Outlet ventilation
Outlet ventilation
4.Filer cover( bottom)4.Filer cover( bottom)
1.Zoom ring1.Zoom ring
2.Focus ring2.Focus ring
3.Front IR receiver3.Front IR receiver
6.Foot adjust button6.Foot adjust button
5.Front adjustable foot5.Front adjustable foot
7.Lens cover7.Lens cover
Use the Zoom Ring to adjust the size of the projected image.
Rotate the Zoom Ring until the image is the desired size.
2.Focus Ring
Use the Focus Ring to focus the projector image.
Rotate the Focus Ring until the image is clear.
-11-
Downloaded From projector-manual.com Boxlight Manuals
Multimedia LCD Projector
Keypad control
1. Power1. Power
2. Input2. Input
3. Blank3. Blank
4.Auto
5. Menu
5. Menu
6. Menu-left/ right,
Menu-up/down
6. Menu-left/ right,
Menu-up/down
7. Keystone7. Keystone
8. Power indicator8. Power indicator
9. Lamp indicator9. Lamp indicator
1.Power button
Power on / operation mode, Standby mode, Cooling-down mode
2. INPUT Computer source
Selects between RGB input source Computer 1 → Computer 2(RGB or YPbPr) →AV →S-Video → Computer1
System will auto detect YPbPr or RGB signal in computer 2 port.
3. Blank
Blanks the projected image. If the projector is left in blank mode
for more than 15 minutes, the projector will automatically shut
down.
-13-
Downloaded From projector-manual.com Boxlight Manuals
Multimedia LCD Projector
4. Auto
Automatically adjusts the setting to match the current input.
5. Menu
Display or hides the OSD main menu page.
6.Menu-up /down, Menu-right / left
Selecting OSD menu item up or down /
Selecting and adjusting the function of OSD menu item
7. Keystone
Adjusts the vertical keystone with menu-right, menu-left
8.Power indicator
Lights on or flashes to indicate the operating status of the projector (See Page 50)
9. Lamp indicator
Indicate a problem in the internal projector temperature, lamp cover or cooling
down. (See Page 50)
-14-
Downloaded From projector-manual.com Boxlight Manuals
Multimedia LCD Projector
Rear View / IO Board
1. Computer in 1
Input Analog RGB video signal from a computer
2. Computer in 2
Analog RGB signal from a computer or YPbPr signal from a video
source.
System will auto detect YPbPr or RGB signal in computer in 2 port.
3. Monitor out connector
Connect an external monitor to this conn ection view the
Computer1 input.
-15-
Downloaded From projector-manual.com Boxlight Manuals
Multimedia LCD Projector
4. Control (RS-232C)
Serial data port for controlling the projector with a computer
or other RS-232 control device.
5. S-Video connector
S-Video signal from a video source.
6. Video in
Component video signal from a video source.
7. Audio out
Connecting to an external speaker system.
8. Audio in
Stereo mini jack for PC input
9. USB mouse connector
Connects a USB mouse cable to a computer to control
computer mouse functions.
10. Power socket
Connects the power core to this connection.
11. Power switch
Turns the power on/off.
12. Rear IR receiver
When using the remote control, point the remote control
at this sensor.
-16-
Downloaded From projector-manual.com Boxlight Manuals
Loading...