+
VCR
CAM 1
EIA/ CCIR
ALARM IN /O UT
1. VIDEO IN 1, 2, 3, 4: Video signal input, e.g. camera.
2. VIDEO IN G1, G2, G3, G4: Adjust level of the video signal.
3. VIDEO OUT SWITCH: Sequent output, connect to monitor, the picture is
shown full function or quad function.
4. VIDEO OUT QUAD: Quad output, connect to VCR, the picture is shown quad
function.
5. DC18V: Power DC 15~18V input.
6. FREENE: Press FREEZN key, the picture will be freeze, LED is on.
Press FREEZN key again, the picture will be back original situation, LED
Is off.
7. QUAD/FULL: Press QUAD/FULL key, the picture will be shown quad situation,
LED is on.
8. AUTO /SELECT: LED is on, the picture is auto switch. LED is off, the picture
is selected full image for every camera.
9. CAM1~CAM4: Every camera is displayed individually, e.g. press CAM 1 key,
the screen is shown image of camera 1.
SPECIFICATION
ITEM 15-QB40
SIGNAL FORMAT EIA / CCIR Monochrome
DISPLAY RATE EIA: 60 fields / sec (EIA); CCIR: 50 fields / sec
VIDEO INPUT CHANNEL 4
VIDEO INPUT 1 V p-p , 75 Ohms
VIDEO OUTPUT SELECT 1 V p-p , 75 Ohms ( Full screen or quad switched
output )
VIDEO OUTPUT QUAD 1 V p-p , 75 Ohms
ALARM INPUT NO
ALARM OUTPUT NO
DIGITAL MEMORY 1024 x 512
MODE SWITCHER NO
SWITCHING INTERVAL 3 sec
ZOOM REPLAY NO
DEFINITION ZOOM NO
DAY / TIME GENERATOR NO
TITLE Freeze
POWER SUPPLY 18 VDC
POWER CONSUMPTION 7W
VIDEO CONNECTORS BNC (CCIR)/ F (EIA)
DIMENSIONS W x H x D 250×44×210 mm
WEIGHT 2.4 kg
CONSTRUCTION Steel
OPERATING
TEMPERATURE
- 10 to + 45 ℃
STORAGE TEMPERATURE
- 30 to + 60 ℃