Bowers and Wilkins HTM-1-D Brochure

HTM1D

The HTM1D is the largest of four centre speakers in the

800 Series. The full conguration of FST™ midrange

in a Marlan® sphere / tube ‘head’ with diamond dome

tweeter on top is used, so that the system perfectly voice

matches either the 800D, 801D or 802D in a substantial

and powerful multi-channel installation.

The HTM1D uses three 8” diameter Rohacell® cone

drivers with twin rear-ring Flowports™. All drivers are, of

course, magnetically shielded to avoid picture distortion

with CRT-based screens.

The HTM1D is specically intended to be mounted

on the oor, its low prole allowing a large projection

screen to come within 2 ft. of the oor. Supplied with the

system are four heavy-duty height-adjustable feet. This

Description:

Frequency Range:

Frequency Response:

Sensitivity:

B&W Group Ltd
Dale Road
Worthing West Sussex
BN11 2BH England

T [phone]
F [phone]
[e-mail]
www.bwspeakers.com

3-way vented-box system

-6dB at 32Hz and 33kHz

38Hz – 28kHz ±3dB
on reference axis

90dB spl (2.83V, 1m)

UK Group (UK Sales)
T [phone]
E [e-mail]

design allows up to 1.6” of vertical adjustment so that

the speaker may be tilted back to face more towards the

listeners. They have a case hardened spike at one end

for carpeted oors, and a non-marking rubber pad on the

other for more vulnerable surfaces.

Nominal Impedance:

Dimensions:

Weight:

Finishes:

B&W Group North America
T [phone]
E [e-mail]

8Ω (minimum 3.7Ω)

H 585mm W 974mm D 580mm
H 23” W 38.3” D 22.8”
(not including feet)

93 kg / 205 lbs.

Cherrywood, Rosenut, Black Ash

B&W Group Asia Ltd
T [phone]
E [e-mail]