Bowers and Wilkins FPM-6 Brochure

FPM 6

With an enclosure height to match the height of 60-

inch plasma screens, the FPM6 is the largest model

in the FPM Series. Compared to the other models,

its enclosure is not only longer, it’s wider too, which

allows the use of two 5” Kevlar® cone bass/midrange

drivers each side of the Nautilus™ tube-loaded

tweeter. Higher output level capability and greater

bass extension result, but timbre matching allows

complete freedom to mix different models for left and

right front, centre and surround if desired.

Freedom and exibility extend to the four possible

Description:

Frequency Range:

Frequency Response:

Sensitivity:

Power Handling:

2.5-way vented-box system

-6dB at 55Hz and 42kHz

65Hz – 22kHz ±3dB
on reference axis

88dB spl (2.83V, 1m)

25W - 100W into 8Ω on

unclipped programme

mounting options. Use the supplied wall bracket if

no tilting of the speaker is needed. If it is, use an

Omnimount® type 20.0 or another compatible bracket

to get up to 10º of downward tilt. If using a tabletop

stand for your screen, simply do the same with the

speakers, using the optional table stand. Finally, there

is an optional oor stand that supports the speaker at

the ideal listening height.

Normal Impedance:

Dispersion:

8 ohms (minimum 3.5 ohms)

Description: within 2dB of
reference response
Horizontal: over 40º arc
Vertical: over 10º arc

Dimensions:

H 794mm W 195mm D 115mm
H 31.3” W 7.7” D 4.6”
(including wall plate)

B&W Group Ltd
Dale Road
Worthing West Sussex
BN11 2BH England

T [phone]
F [phone]
[e-mail]
www.bwspeakers.com

UK Group (UK Sales)
T [phone]
E [e-mail]

Weight:

B&W Group North America
T [phone]
E [e-mail]

6.8 kg / 15 lbs.

B&W Group Asia Ltd
T [phone]
E [e-mail]