Botex DMX SDC-6 User Manual

Controller DMX SDC-6

User manual

DMX controller

Musikhaus Thomann

Thomann GmbH

Hans-Thomann-Straße 1

96138 Burgebrach

Germany

Telephone: [phone]

E-mail: [e-mail]

Internet: www.thomann.de

05.03.2020, ID: 390953

Table of contents

Table of contents

1 General information................................................................................................................................. 5

1.1 Further information........................................................................................................................... 6

1.2 Notational conventions.................................................................................................................... 7

1.3 Symbols and signal words............................................................................................................... 7

2 Safety instructions..................................................................................................................................... 9

3 Features....................................................................................................................................................... 14

4 Starting up.................................................................................................................................................. 15

5 Connections and controls................................................................................................................... 18

6 Technical specications....................................................................................................................... 20

7 Plug and connection assignments.................................................................................................. 21

8 Protecting the environment.............................................................................................................. 22

Controller DMX SDC-6
DMX controller

3

Controller DMX SDC-6

4

DMX controller

1 General information

This manual contains important instructions for the safe operation of the unit. Read and follow
the safety instructions and all other instructions. Keep the manual for future reference. Make
sure that it is available to all those using the device. If you sell the unit please make sure that
the buyer also receives this manual.

Our products are subject to a process of continuous development. Thus, they are subject to
change.

General information

Controller DMX SDC-6
DMX controller

5

General information

1.1 Further information

On our website (www.thomann.de) you will nd lots of further information and details on the
following points:

Download This manual is also available as PDF le for you to download.

Controller DMX SDC-6

6

DMX controller

Keyword search

Online guides

Personal consultation For personal consultation please contact our technical hotline.

Service

Use the search function in the electronic version to nd the topics of
interest for you quickly.

Our online guides provide detailed information on technical basics
and terms.

If you have any problems with the device the customer service will
gladly assist you.

1.2 Notational conventions

This manual uses the following notational conventions:

General information

Letterings

The letterings for connectors and controls are marked by square brackets and italics.

Examples: [VOLUME] control, [Mono] button.

1.3 Symbols and signal words

In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.

Controller DMX SDC-6
DMX controller

7

General information

Signal word Meaning

DANGER! This combination of symbol and signal word indicates an

immediate dangerous situation that will result in death or
serious injury if it is not avoided.

NOTICE! This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in material and
environmental damage if it is not avoided.

Warning signs Type of danger

Warning – danger zone.

Controller DMX SDC-6

8

DMX controller

2 Safety instructions

Safety instructions

Intended use

This device is used to control spotlights, dimmers, lighting eects equipment or other DMX­controlled devices. Use the device only as described in this user manual. Any other use or use
under other operating conditions is considered to be improper and may result in personal
injury or property damage. No liability will be assumed for damages resulting from improper
use.

This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.

Controller DMX SDC-6
DMX controller

9

Safety instructions

Safety

DANGER!
Danger for children

Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!

Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!

Never let children unattended use electrical devices.

NOTICE!
Risk of re

Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked ames.

Controller DMX SDC-6

10

DMX controller

Safety instructions

NOTICE!
Operating conditions

This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.

NOTICE!
External power supply

The device is powered by an external power supply. Before connecting the
external power supply, ensure that the input voltage (AC outlet) matches the
voltage rating of the device and that the AC outlet is protected by a residual cur‐
rent circuit breaker. Failure to do so could result in damage to the device and pos‐
sibly the user.

Unplug the external power supply before electrical storms occur and when the
device is unused for long periods of time to reduce the risk of electric shock or

re.

Controller DMX SDC-6
DMX controller

11

Safety instructions

NOTICE!
Risk of re due to incorrect polarity

Incorrectly inserted batteries may destroy the device or the batteries.

Ensure that proper polarity is observed when inserting batteries.

NOTICE!
Possible damage by leaking batteries

Leaking batteries can cause permanent damage to the device.

Take batteries out of the device if it is not going to be used for a longer period.

Controller DMX SDC-6

12

DMX controller

Safety instructions

NOTICE!
Possible staining

The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC oor and after some
time cause permanent dark stains.

In case of doubt, do not put the rubber feet directly on the oor, but use felt-pad
oor protectors or a carpet.

Controller DMX SDC-6
DMX controller

13

Features

3 Features

Special features of this DMX controller:

n 6 channel faders
n Master fader
n Compact design
n Simple operation
n Power supply by 9 V battery (not included) or the supplied 9 V external power supply

Controller DMX SDC-6

14

DMX controller

4 Starting up

Starting up

Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.

Create all connections while the device is o. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.

Power supply

Changing the battery

You can use either a 9 V battery or the 9 V connector for external power supply. Before con‐
necting check for correct polarity.

To insert or change the battery, switch o the device rst. Carefully lift and remove the battery
compartment cover. Change the battery. Replace the battery compartment cover and press it
gently until you hear it click into position.

Controller DMX SDC-6
DMX controller

15

Starting up

NOTICE!
Possible data transmission errors

For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.

Never connect the DMX input or output to audio devices such as mixers or ampli‐

ers.

Controller DMX SDC-6

16

DMX controller

Starting up

Connections in DMX mode

Connect the DMX input of the device to the DMX output of a DMX controller or another DMX
device. Connect the output of the rst DMX device to the input of the second one, and so on
to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain
is terminated with a resistor (110 Ω, ¼ W).

Controller DMX SDC-6
DMX controller

17

Connections and controls

5 Connections and controls

Controller DMX SDC-6

18

DMX controller

1 [1] … [6]

Channel faders 1 through 6.

Use the channel faders to individually control DMX channels 1 … 6.

2 [POWER]

Power indicator.

3 [MASTER]

Master fader.

The master fader serves as the sum controller for the six individual channels.

4 [DMX OUT]

DMX output.

5 [ON/OFF]

Main switch. Turns the device on and o.

6 Connection socket for the power adapter.

Connections and controls

Controller DMX SDC-6
DMX controller

19

Technical specications

6 Technical specications

Output XLR socket, 3-pin

Operating supply voltage

Dimensions (W × H × D) 153 mm × 55 mm × 173 mm

Weight 0.8 kg

Controller DMX SDC-6

20

DMX controller

9 V plug-in power supply , 100 mA, centre positive

9 V battery 6LR61 or 6LF22

7 Plug and connection assignments

Plug and connection assignments

Introduction

DMX connections

This chapter will help you select the right cables and plugs to connect your valuable equip‐
ment so that a perfect light experience is guaranteed.

Please take our tips, because especially in ‘Sound & Light’ caution is indicated: Even if a plug
ts into a socket, the result of an incorrect connection may be a destroyed DMX controller, a
short circuit or ‘just’ a not working light show!

The unit oers a 3-pin XLR socket for DMX output and a 3-pin XLR plug for DMX input. Please
refer to the drawing and table below for the pin assignment of a suitable XLR plug.

Pin Conguration

1 Ground, shielding

2 Signal inverted (DMX–, ‘cold signal’)

3 Signal (DMX+, ‘hot signal’)

Controller DMX SDC-6
DMX controller

21

Protecting the environment

8 Protecting the environment

Disposal of the packaging mate‐
rial

For the transport and protective packaging, environmentally friendly materials have been
chosen that can be supplied to normal recycling.

Ensure that plastic bags, packaging, etc. are properly disposed of.

Do not just dispose these materials with your normal household waste, but make sure that
they are fed to a recovery. Please follow the notes and markings on the packaging.

Disposal of batteries

Batteries must not be disposed of as domestic waste or thrown into re. Dispose of the bat‐
teries according to national or local regulations regarding hazardous waste. To protect the
environment, dispose of empty batteries at your retail store or at appropriate collection sites.

Controller DMX SDC-6

22

DMX controller

Disposal of your old device

Protecting the environment

This product is subject to the European Waste Electrical and Electronic Equipment Directive
(WEEE) in its currently valid version. Do not dispose with your normal household waste.

Dispose this device through an approved waste disposal rm or through your local waste
facility. When discarding the device, comply with the rules and regulations that apply in your
country. If in doubt, consult your local waste disposal facility.

Controller DMX SDC-6
DMX controller

23

Notes

Controller DMX SDC-6

24

DMX controller

Notes

Controller DMX SDC-6
DMX controller

25

Notes

Controller DMX SDC-6

26

DMX controller

Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de