Boss Audio Systems MR1308UAB User Manual

USER'S

MANUAL

MR1308UAB

BLUETOOTH FULLY

MARINIZED

MP3-COMPATIBLE

WITH

USB

®

AND

SD

-ENABLED

DIGITAL

MEMORY

CARD

PORTS

MEDIA

AND

FRONT

RECEIVER

PANEL

AUX

INPUT

®

INSTRUCTION

MANUAL

CAR

TUNING

UP/DOWN

NEXT/BACK

BUTTON

I

SEEK

CANCEL/

SRC

BUTTON

DISP POWER MUTE

BUTTON BUTTON BUTTON BUTTON

WITH

EQ

BUTTON

AMS

BUTTON

RADIO

BLUETOOTH

AUDIO

RECEIVER

HAND

BAND LOUD

BUTTON BUTTON

PLAY/

PAUSE SCAN

BUTTON BUTTON BUTTONS

MP3

I

PLAYER

FREE SYSTEM

LCD

DISPLAY

REPEAT

INTRO

BUTTON BUTTON

RANDOM

10+/-

UP

FOLDER

DOWN

I

MENU TALK

BUTTON BUTTON

POWER BUTTON

CANCEL/SAC BUTTON

DOWN BUTTONS

I

VOLUME

UP

ENCODER

VOLUME

KNOB

----+--+i

- -

INFRARED

REMOTE SENSOR

_I

- - -

PRESET

.....------+----

"+--+----MUTE

+-+----

...-:~--1----

I

~~~~~~-1----

s-+--+----

r---=--+----

~-+---

r

I:J!IJ#iiUeJI:I

MEMORY STATION

(M1-M6)

TALK

BAND AUDIO BUTTON

TUNING

BUTTON

AMS INTRO SCAN BUTTON

REPEAT

- - - - PRESET

svsTEM

BUTTONS

BUTTON

MP3 TRACK

I

SEEK

I

BUTTON

MEMORY BUTTONS

DOWN BUTTON

I

UP

BUTTON

EO

LOUD BUTTON

----+--t-

----+----J

:---c::::::;;;;:;---t---

C-1-----1----DI

FOLDER

1 0+/-

BUTTON

SP

REMOTE

DOWN BUTTONS

I

UP

CONTROL

INSTALLATION

• Before final installation, connect the wiring temporarily and make sure it properly.

• Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.

an

• This item must be installed by

it

• Install the unit where

is

there

• Avoid installing the unit where

sunlight, or hot air, heater or where Be

•

a sudden stop, like

sure to remove the front panel before installing the unit.

does not get

an

authorized dealer

in

the driverls way and cannot injure the passenger if emergency stop. it

would be subject to high temperature, such

it

would be subject to dust dirt or excessive vibration.

in

order to keep the warranty vaild.

is

all working

as

direct

DIN FRONT/REAR-MOUNT

This unit can be property installed either from Front (conventional

(DIN

Rear-mount installation, utilizing threaded screw holes at the sides of the unit chassis).

For details, refer to the following illustrated installation methods A and

- DIN FRONT-MOUNT (Method

Installation the unit

1

2

53~

A)

1 . Dashboard

2.

Holder After inserting the half sleeve into the dashboard, select the appropriate tab according to the thickness of the dashboard material and bend them inwards to secure the holder

DIN

Front-mount) or Rear

B.

in

place.

Removing the unit

a

c

a.

Frame

b.

Insert fingers into the groove

front of frame and pull out to remove the frame. (When re-attaching the frame, point the side with a groove down wards and attach it.)

c.

Insert the levers supplied with the

unit into the grooves at both sides of

as

the unit click. Pulling the levers makes it possible to remove the unit from the dashboard.

shown

in

figure until they

in

the

E-

1

- DIN

REAR-MOUNT (METHOD

Installation

using the screw

holes

B)

on the sides

of

the unit.

Fastening the unit to the factory radio mounting bracket.

1 .

Select holes holes aligned screws at 2 places

2.

Screw

3.

Factory radio mounting bracket.

4.

Dashboard

5.

Hook

a position where the screw

of

the bracket and the screw

of

the main unit

become

(are fitted) and tighten the

on each side.

or

Console

(Remove this part)

2. DETACHABLE

CONTROL

Removing The Detachable

PANEL RELEASE BUTTON

Attaching the DCP

PANEL (D.C.P.)

Control Panel

(D.C.P.).

1.

Turn the power off

2.

Press the

3.

Remove the

1 . Attach the

point 8 on the main unit touching point A on the

2.

Then press the main unit

Note: the and

mounting

half-sleeve

8 installation.

D.C.P.

panel at the right side first, with

D.C.P.

(As shown on the diagram).

until

a click

box, outer trim ring,

are not used for method

release

left

button

side of

D.C.P.

onto the

sound is heard.

CAUTION

• DO NOT

•

The D.C.P can and be

•

When the cause it to detaching

•

The rear connector that connects the main unit and the D.C.P is an part. Be

insert the D.C.P from the

careful

release

fall.

easily

not to

To prevent

be

damaged

drop

button is pressed and the D.C.P

it.

careful

not to

damage

left

side. Doing so

by

shocks. After removing

may

it or subject it to strong shocks.

is

unlocked,

dam~e

it

to the

by

D.C.P,

pressing on it with

always

store it

fingernails,

Note: If

the D.C.P is dirty, wipe off the dirt with soft, only. alcohol to

And use a cotton

clean the socket on the back

E-2

damage

it,

place

the

in

a protective case after

swab

it.

it in a protective case

earls

vibrations may

extremely

important

pens, screwdrivers, etc.

dry

cloth

soaked in isopropyl

of

the

D.C.P.

DETACHABLE CONTROL PANEL (D.C.P.)

Removing The Detachable Control Panel

D.C.P.

Attaching the Detachable Control panel (D.C.P.)

(D.C.P.).

Turn the Power off.

1. Press the Panel Release

2.

Remove the D.C.P

3.

1.

Insert

the right side of the

the main unit.

NOTE: The

nt.

T-Joi

the

D.C.P.

Must be attached into

Button.

D.C.P.

Into

1'

2.

CAUTION

• DO NOT The D.C.P can easily

•

careful

be

• When the

fall.

to

• The rear

careful

insert the D.C.P from the left

to

not

release

To prevent

connector

damage

to

not

side. Doing so

shocks. After removing it, place

damaged

be

subject

or

it

drop

button is pressed and the D.C.P

the

damage

that

to

connects

pressing on it with

by

it

by

strong shocks.

to

it

D.C.P,

always

the main unit and the D.C.P is an

fingernails,

side of

Press the

2. middle

of

D.C.P.

On

Until

to the

click

a

left

sound

is

heard.

damage

may

unlocked,

is

store it in a protective case after detaching

pens, screwdrivers, etc.

Note:

it.

it in a protective case and

the earls

extremely

vibrations

may

important part. Be

cause it

it.

the D.C.P is dirty,

If

cloth only.

dry

isopropyl alcohol

in

the

of

back

E-3

off the dirt with soft,

wipe

And use a cotton swab soaked

socket

the

D.C.P

to

clean

on the

ELECTRICAL

a.

Make sure your car battery converter

b.

Before starting wiring connections, disconnect the power

will

CONNECTION

is

a

be

necessary).

12

volt

(6

filler

caps) negative ground system (if not, a

from the fuse box.

c.

Connect the power wire to one of the extra

d.

Connect the

black

ground wire to a metal

terminals of the fuse box.

part of the car.

contact.

e.

Make other wiring connections as shown.

f.

If

your car does not have ISO

Notes: INCORRECT WIRING OR OPERATION WILL AVOID

connector, you can procure

supply

It

is

it

THE WARRANTY

by removing the fuse

important to make good

from any car

acctssory

OF THIS

shop.

UNIT.

(CAR

UNIT

BACK

SIDE)

FUSE

Fuse Replacement: To

replace

from the socket.

the fuse,

Insert

pull out

rating

GENERAL OPERATION

POWER ON/OFF Press

Press

POWER

MUTE BUTTON

Press the mute button momentarily

display.

AUDIO

Press the mute button again to restore

SELECT

Press this button to select

VOLUME (VOL)->BASS (BAS)-> TREBLE (TRE)-> BALANCE (BAL)->

Rotate

Volume Control

MENU BUTTON

BUTTON (

<D

) button or any other button on the front of the radio to turn the unit on. button again to turn the unit off.

to mute the audio

BUTTON(ROTARY VOLUME

volume,

volume

to the previous setting.

CONTROL

KNOB)

and

11

Mute

desired audio function.

to adjust desired

level

within 3 seconds.

the

blown

fuse

a new one with same

11

will

in

the

FADER

(FAD)

Press MENU Button to navigate through the menu items, displayed,

-

LOCI

OX

use

Volume control

MODE

Use this mode to change between Local improves reception

- BEEP BEEP

BEEP

MODE

(BEEP ON

OFF: disable audible beep tone when any function ON: enable audible

in

some areas where the

I

to adjust the selected function:

and Distant

signal

(OX)

is

too strong.

OFF)

beep tone.

E-4

while

the desired menu item

tuning mode.

is

accessed.

Local

is

mode

EQ BUTTON (PRESET EQUALIZER)

DSP OFF->CLASSIC->POP->ROCK

DSP

At

LOUD BUTTON

Use this LOUDNESS control to increase bass output.

ROTARY ENCODER VOLUME KNOB

When the Menu function When Menu function

• Press this button to select different sources , sequence as follow:

• Whenever a USB or SDIMMC

off mode preset equalizer will be controlled by Bass I Treble setting.

is

not activated, rotate this knob to change the volume level.

is

activated, rotate this knob to navigate through different menu items.

SRC BUTTON

A)

Tuner mode (Radio)

B)

USB (only

C)

SD

I MMC (only if a

D)

AUXIN

E)

BT

MODE (only if unit

SOURCES PRIORITY

SDIMMC mode, does not matter the unit

if

a USB drive

is

inserted)

SD

or MMC card

is

paired to a mobile phone)

is

being inserted, unit will automatically switch to USB or

is

inserted)

is

currently

in

what mode.

When automatically switch to radio mode.

FRONT AUX INPUT

Connect Mode button to select Aux mode. Press Mode button again to cancel Aux Mode and return

to previous mode.

DISP BUTTON

Press DISP button once to display current playing status (e.g. Frequency of RadioiAUXI Music information (Eiasped time and ID3) of USB ISD-MMC Play).

in

USB or

the

SD

external

I MMC mode, if the USB or

device to the front 3.5mm jack on front panel, then press

SD

I MMC is being removed, unit will

- During USB in

sequence.

I SD-MMC play, Elasped time and ID3 tag of current track will be displayed

E-5

AUTO MEMORY STORE/PRESET SCAN BUTTON (AMS)

1.PRESET SCAN: stations

in

the memories, you can hear that

2.AUTO MEMORY STORE: automatically memories.

TUNING

UP

Press

AMS

Press

button

AMS

briefly

button

scan the current band and enter up to 6 strongest stations into the 6 preset

To

stop Auto

I

DOWN BUTTON (

Store

&

Scan,

1<111111<111111

press the AMS

~~~

)

Press this button to search for radio stations.

BAND BUTTON

Press this button to change between bands RESET

The RESET with a

following

BUTTON

button

is

located

ballpoint pen or

reasons:

on the front panel

metal

object will

activate

enter Preset

will

stay on each station for about 1

Scan

long to enter Auto

button again.

FM1

,FM2,FM3,

(as

shown on the diagram). To press it

it.

The reset button

mode, it

MW1

will

scan all the preset

Store

mode, this feature

,MW2(AM).

is

to be activated for the

0

seconds.

vertically

will

• Initial installation of the unit when

• All the function buttons

•

Error

Note:

symbol

If

on the

the unit cannot function

isopropyl alcohol

do

not operate.

display.

to

clean the socket on the back of the

LIQUID CRYSTAL DISPLAY The LCD

panel display the frequency, time and activated functions.

all wiring

normally

PANEL (LCD)

NOTE: It

is

a characteristic of LCD of time, they visibility

will

take

of the numbers on the LCD may

longer

panel

that if subjected to

time to illuminate

normal when temperatures increase to a

STATION PRESET BUTTONS

You can store TO STORE

&

recall

A

STATION:

six preset radio stations by pressing M1-M6 buttons

1)

2)

3)

(M1-M6)

select select hold

a band (if needed)

a station by tuning up

a preset button which you want store the station for at least seconds. The preset number accompanied by a beeps sound.

TO RECALL

A

STATION:

1)

select

2)

press a preset button

a band (if needed)

is

'

completed.

after reseting,

than under slightly normal

decrease. The LCD read-out range.

briefly to

please

control panel.

cold

temperatures for

normal

I

down button

will

appear on the

recall

use a cotton swab soaked

an

extended period

conditions,

in

addition, the

will

return to

display

the stored station.

in

2

E-6

MP3/SD/USB OPERATIONS

M1)PLAY/PAUSE AND

Press

M2)1NTRO SCAN

Press this button to select Intra Scan

sequentially

M3)REPEAT BUTTON

Pressing Repeat

M4)RANDOM PLAY BUTTON

When random play mode one more time to cancel random play mode.

TRACK UP AND TRACK

Under normal play mode, press the Track Up Button for less than 1 second to skip the

playback the beginning of the current track, press this button one more time to skip to the previous track.

When any of these buttons

Cue/Review mode, this

released, normal play

this button briefly to pause

until this button

this button

Repeat

~

On

to the next track, or press the Track Down Button for less than 1 seconds to return to

FIRST TRACK BUTTON

MP3

BUTTON

function, the first

pressed again, then normal play

is

activate Repeat Function

will

Off

selected, the tracks will

is

DOWN BUTTON (

pressed for more than 1 second, the Mp3 player

is

indicated by the flashing track number on the

is

will resume.

play, press again to release pause.

10 seconds of each track will

resume at the current track.

will

the following

in

be played

..,....,..1)

......

1

order:

random order, press this key

in

LCD.

be played

enter

will

When the key

is

E-7

MMC/SD

CARD

USB DEVICE OPERATIONS

&

START

1.The USB socket

1.(P.1)

2.Piug picture

in indicate that the USB drive correctly

3.Does not matter which source the unit

(TUNER,SD/MMC,AUX,BT,etc), once a USB drive

being plugged into the unit, unit will automatically

is

\

switch to USB mode.

4.AII

I

·. MP3 files playback.

Warning:

may cause permanent may cause access to the buttons on the front panel impossible. User must use an extension cable (provide by USB device manufacturer) to connect with USB socket to prevent any damage cause.

THE

the USB drive

in

&

the USB files playback function

USB DEVICE MODE

picture

is

in

as

in

as

indicated

normal

indicated

device

I

as

being plugged

is

same

is

accessible

is

device completely

I

2(P.2)

Excessive weight or size USB drive/device

and display will show USB-LOAD to

the download has begun.

serious damage to the unit and

&

in

device

I

~

c::::ll:::l

/

II

~-

0

e

SOCKET

USB

~

TO STOP USB PLAYBACK

unplugged, the unit will automatically switch to radio mode.

device

the USB drive

1.1f user can use

Or

2.User can use the the

inserted USB SPECIFICATION

* SUPPORT * SUPPORT MAX 9999 * USB * USB 2.0 DEVICE SUPPORT

(TRANSFER SPEED SAME *FILE * CURRENT

CAUTION

1.Aiways unplugged the USB gently from the unit, excessive force used will cause permanent damage to the unit

COMPATIBILITY

Due to the fast changing technology world, this unit may or may not be compatible to available with all the future technology, especially those USB drive choose a compatible USB drive compatible with this unit.

in

DEVICE

1.1

MANAGER: FAT12/FAT16/FAT32

device which require to install a driver. Always

I

SRC

or any other modes, when they are

unit)

32G USB FLASH MEMORY

MAX

SUPPORT

SUPPLY.

&

is

button to switch to other mode.

button to choose USB mode (only if USB drive

in

SONGS

.1)

1

VER

AS

500mA

MAX

serious

&

device.

the USB drive

all

I

device which

I

device

I

is

any mode.

device

I

is

NOTE:

not compatible with portable Hard-Disc.

This unit

is

E-8

START

THE SD/MMC MODE

1 . The SDIM MC card slot is located on indicated

2.

Insert the SDIMMC card into the card slot

direction until a

3.

The display will MMC inserted, the MP3 file will automatically loaded & playback will also start.

4.

Does not matter the unit is in etc), automatically switch

5. All the MP3 files playback.

in

(P.4).

CLICK

card is correctly inserted.

once

a

SO

or

SO

I

MMC files

TO STOP SD/MMC CARD PLAYBACK

1.Push on the end of the card is taken out, the unit will automatically switch

2.User can use the SRC

the

unit)

or

any

other modes, when they are

SO

or

button

MMC

to

choose

card

to

eject the sd

SO

I

MMC

in

any mode.

show

MMC

to

previous mode

top

sound

SD-MMC

card is being inserted

SO

is heard.

Once

what

I

MMC

playback

or

MMC

mode.

(only if

to

indicate that the

the

SO

sources (Tuner,USB,AUX,BT,

mode.

function is same as normal

card.

SO

Once

or

MMC

of the front panel as

in

the correct

SO

or

MMC

in

the

card is

the unit, unit will

SO

or

MMC

is inserted

in

"

SDIMMC SPECIFICATION *

SUPPORT

*

SUPPORT

*FILE

MANAGER FAT12, FAT16, FAT32

MAX 32G MAX 9999

SDIMMC

SONGS

CAUTION

2.Piease make sure card

in

the correct direction indicated in picture 6(P.5). cause permanent & serious unit & the

SO

or

to

MMC

insert the

card.

CARD

SO

I

orientation as

Wrong

damage

insert will

SUPPORTED

or

MMC

to

the

E-9

Front

side

--u-0

Back

side

MP3

OPERATIONS(MP3/SD/MMC/USB FILES)

Loading MP3

During MP3

the disc

If current track, The

1 . Track name

name

Title

2. Artist name

3. Album

4.

Folder

5. Navigating Through There are Four ways to

1.By Track Up/Down Button

Press track up/down button to skip the current tracks.

Track Up/Down

0-

2.1

Press

tracks.

3.Folder UP/Down

Press

Folder

File ( MMC/SD/USB Drive)

Current Track Number

play,

compatible,

ID3

is

following

SONG

TITLE

ARTIST

name ALBUM

name

DIR

Folders and Tracks

up (M6)/F

select

Button

+

or

+

press DISP

categories of

your favourite folder/tracks.

(~

Folder down Button (M5)/F- for more than 1 seconds skip1

or

Folder

Time Elapse

&

button to

will be shown:

tag

ID3

)

IJ+I

down Button (M5)/F- briefly

of current track will

display elasped

time and

to skip

be shown on the

tag of

ID3

Folder.

LCD.

0

4.NAVIGATING

Under MP3 then turn the Encoder

Then press

THROUGH

modes, press

play

Volume knob to confrim.

DIRECTORIES

Volume

Menu button once, the

AMS

knob to

select

AND TRACKS

display

desired track number directly,

shows

TRK-SCH,

E

-10

BLUETOOTH MODE OPERATION

INSTRUCTION FOR HANDSFREE FUNCTION

1.

PAIR

IT

WITH

YOUR

PHONE

(PAIRING)

Before you use your Car HANDSFREE System, you need to pair

1.

The Bluetooth set system on the head unit will automatically

it

with your mobile phone.

go

into pairing mode when the

POWER turned on .

2.

Set your Bluetooth phone to discover the BOSS AUDIO

3.

Your phone will find the BOSS AUDIO

it.

Your phone then asks if you want to pair with

and confirm with the passkey or

PIN~=OOOO

(4

Accept by pressing

zeros). Your phone will confirm when pairing

Yes

or OK on the phone

is complete. In

case of unsuccessful pairing, repeat steps 1 to 3 .

2. OPERATION

an

• Call Accept: Single click TALK button during

• Call Reject: Click CANCEL

(SRC~)

or (STOP) on the remote during

incoming call to accept the call.

an

incoming call will

reject the call.

• Call End: Single click

SRC~

button when communication or dialling

an

outgoing call to

hang up.

• Call Disconnect: No

BT

mode Click TALK button about 1.5 seconds when

it

is

not

in

communication mode. And Disconnect and BT OFF will showed on the display.

• Call Re-connect, Click TALK button again at the Disconnect Status. The connection will be

reconnected and CONNECT &

BT

ON

will showed on the display.

• Call Transfer (Private mode): Click TALK button about 1.5 seconds at communicating time, -·

transfer the call to phone, click talk button once again, transfer the call to Bluetooth.

Pis

• Auto Answer (Depend on mobile phone feature):

refer to your own mobile phone manual

for handsfree auto answer setting.

• Volume Adjust: User can use the volume up/down to adjust the volume level.

3.

WHAT DISPLAY CAN SHOW DURING THE INCOMING/OUTGOING

CALL

MODE

INCOMING CALL

• When there number

is

an

incoming call, the display will display the incoming caller telephone

If

the incoming call has no caller number, the LCD will display 00000000 user can

short press the TALK button answer I accept the call and the Talking display will be showed

is

when the call

• To end the conversation, press the

answered.

CANCEL(SRC~

or (STOP) at the Remote control and the Hang up will showed on display. The unit and the display on the LCD will switch back to the previous mode automatically.

OUTGOING CALL

• User can use his

I her Mobile Phone or remote control to dial and make

Once the user start dialling, the display should show DIALING.

• The audio output of the present mode will ONLY be muted after pressing the TALK button as a confirmation to dial the outgoing call.

• During talking mode, the LCD Display will display talking time.

• To end the conversation, press the CANCEL control and the Hang up will showed on display. The unit and the display on the switch back to the previous mode automatically. The mute of the previous mode will be released at the same time.

E

-11

(SRC~)

button or (STOP) at the Remote

an

outgoing call .

LCD

will

BLUETOOTH

4.

• Before you start to use our Bluetooth HEAD phone completely. Please refer to the section of Pairing & Re-connection, please make sure the phone Battery

NOTICE

UNIT , Please pair the unit with your mobile

PAIRING

To ensure the best reception for

fully charged when making

is

the pairing or Re-connection.

Every time you turn the power on, the unit will automatically re-connect with the mobile

• phone.

some conditions,

By pressing the TALK button the unit will start the Auto-Reconnection .

•

In

the user will need to reconnect manually. For example like the following.

meters away from the head unit) the unit will be

the mobile phone

If

•

out of range.

is

(2

disconnected from the mobile phone.

will have to be done manually.

user wants to re-connect,

If

• The Bluetooth symbol (

•

it

) and the connected symbol (

...

<

on the mobile phone will be

>)

I

different from one to another. Please refer lo the corresponding specification.

or other

When you hang up the phone, the main unit will return to previous mode (radio,

•

SO

mode).

• Some

mobile phone brands like

when Blue Tooth mode

switched on.

is

Sony

when operating with this Head Unit, .

switched on.

happen Power Saving Mode

is

• To ensure the best conversation quality

11

Ericsson may have

PLEASE DO NOT

some abnormal communication behavior will

As

performance, please always keep talking within 1

I

Power

Switch

Saving

ON

Modell

Power saving Mode

selection

meters of the Head Unit.

such

• Some

case, the

Mobile Phones can support

Incoming

Ringing Tone will be same

Phone. But some Mobile Phones like

be using the standard Ring-tone of the Head unit.

will

tone

IN

BAND

RING

TONE, such as Motorola, Nokia.

the original Ring-tone of the Mobile

as

Sony Ericsson do not support this feature. The Ring-

In

• Using voice dialing, please make sure the phone and the head unit within 3 meters of each

other. Also please make sure your mobile phone support voice dialing function. And please

you want to know the operation further about

consult with your mobile phone supplier

if

voice dialing.

user wants to disconnect the head unit with the Mobile Phone, please click talk button

If

•

long once or switch

LISTENING TO MUSIC USING BOSS AUDIO ON THE

capable of streaming music over Bluetooth from a mobile phone

• BOSS AUDIO supporting

is

A2DP.

Press the

11

0FF

11

Blue Tooth connectivity on the Mobile Phone.

AUDIO MODE

BT

audio mode, once you

SRC

button to select Bluetooth

~

BT

have paired your Car Handsfree with your mobile phone, use your phone to play, pause,

stop, skip forward and backward. When you receive a call, the music will be automatically

paused and you will be able to answer or reject a call through the headset. call, the music will continue.

On some phones you may have to press play to start the music

Once

you end a

again.

compatible with some phones

• And you can also make

outgoing call (This function

an

is

which can make outgoing calls during the A2DP mode.)

E -12

Specifications for

BLUE

Power Consumption Output Frequency Band Range Standard

•

TOOTH

Power

Specifications subject to change without notice.

Blue

tooth

200mA 0

dBm (Class

2.4GHz - 2.4835GHz 3 meters (free space) Bluetooth

Max.

V2.1

II)

specification

ISM

Band

Remark:

Our

Bluetooth Handsfree

with profiles such

limited due to some phones dedicated interfacing specifications, even with phones of which the actual Bluetooth specifications and used profiles apply to our Bluetooth Handsfree specifications. Please check the compatibility list or try it

is

not mentioned

as

Handsfree profile and Head

in

System

the list.

adapts to the Bluetooth spec V2.1.

Set

profile. However the functionality may be

it

out

in

practice your phone at the local dealer

It

is

compatible

System

in

case

Note:

Compatibility and connectivity with all Bluetooth mobile phones

is

not guaranteed.

Warning:

Many jurisdictions have laws regarding the use of a phone Obey

all local laws. Always keep your hands free to operate the vehicle while driving.

in

a vehicle.

Your first consideration while driving should be road safety.

E

-13

SPECIFICATIONS

RADIO SECTION FM

Frequency Range

Usable Sensitivity Stereo Separation S/N Ratio

AM (MW)

Frequency Range Usable Sensitivity S/N Ratio

GENERAL

Power Supply Polarity Speaker impedance Power Output

87.5-107.9 Better than 15d B at S/N 30 25 dB at 1KHz

50 dB

530 -1710KHz Better than 45d B

40 dB

DC

11 Negative Ground 4 ohms 50Wx4

MHz

-14V

dB

REMARK: Specifications subject to change without notice.

E-

14

752-HS8005BI-01-01

IO~S

AUDIO SYSTEMS

PLACE

POSTAGE

HERE

THIS

PRODUCT

AND

WORKMANSHIP. CHOOSE DESIGN.

CASHIER'S CHECK

CANADA SEND

A

HAVING PLEASE

THIS

WARRANTY

REPAIR RESULTING ORIGINAL

THIS

DOCUMENT

PURCHASER

WARRANTY.

REPLACEMENT ORIGINAL

IS

TO

REPLACE

CUSTOMER

AND

PUERTO

COPY

OF

WITH

THE

CONTACT

OR

MOD/FICA

FROM

PURCHASE

AGREES

SHOULD

SHALL

WARRANTY

WARRANTED

THE

DOES

IS

THE YOUR

WILL

BE

OR

MON

RICO,

ORIGINAL

PRODUCT.

US

TO

RECEIVE

NOT

TION

PERFORMED

LEGAL

ACTION

PRICE

THE

SOLE

TO

RETAIN

BOSS

BE

CONSIDERED

PERIOD.

FORA

PERIOD

WARRANTY

PRODUCT.

RESPONSIBLE

EY ORDER

PAYABLE

INVOICE

YOUR

DAYTIME

A

RETU

COVER

A

FOR

BREACH

OF

THE

UNIT.

REMEDY

THE

AUDIO

SYSTEMS

THIS

WARRANTY

51\l~S

AUDIO SYSTEMS

OF

ON E

YEAR

FROM

IS

FOR

REPAIR

WE

MAY

FOR

IN

THE

TO

BOSS

WITH

DATE

PHONE

RN

A

UT

NY

UNIT

BY

SOMEONE

OF

AS

A

CONDITION

UNDER

THIS

ORIGINAL

OR

A

TRANSACTION

OR

REPLACEMENT

REPLACE

FREIGHT

AMOUNT

AUDIO

H

SUBJECT

AN

IS

IT

WITH

A

CHARGES

OF

520.00

SYSTEMS

OF

PURCHASE

NUMBER,

ORIZ

ATION NUMBER (

TO

OTHER

EXPRESSED

WARRANTY.

PROOF-OF-PURCHASE

AUTHORIZED

NON

-

TRANSFERABLE.

AND

ABUSE,

THAN

OR

or

TillS

ALL

UNDER

.

A

IMPLIED

DEALER

THE DATE

NEW

INCURRED

TO

PLEASE

YOUR

NFGLECT.

BOSS

WARRANTY, LIABILITY

THE

OF

AT

THE

OR

RECONDITIONED

TO

FOR

CONTINENTAL

COVER

RETURN

ENCLOSE

RETURN

RAI

)

INCORRECT

AUDIO

WARRANTIES

FOR

ESTABLISHING

REPLACE

ORIGINAL

PU

RCHASE

SOLE

DISCRETION

RETURN

BEFORE

SYSTEMS

IT

THE

U.S.

SHIPPING

A

LETTER

SHIPPING

l'i

COINCIDENTAL

WARRANTY.

SENDING

SHALL

AGRffD

YOUR

ADDRESS

WIRING,

REPAIR

PRODUCT

AGAINST

OF

ONE

OF

PRODUCT

OR

S3S

.

OO

AND

STATING

(NO

YOUR

WATER

TECHNICIAN

BE

LIMITED

THAT

THF

DAMAGES

THE

EFFECTIVE

UNDER

AND

DOES

DEFECTS

SELLING

THE

AND FOR

HANDLING

THE

P.O

DEFE

TO

RfMFnY PROVInFn

IN

MATERIALS

DEALER

SAME

OR

WILL

INCLUDE

HAWAII

.

YOU

PROBLEM

.

BOXES

CTIVE

ITEM

DAMAGE

.

ANY

DAMAGES

THE

COST

IS

EXCLUDED

DATE

WARRANTY,

NOT

EXTEND

.

IF

SIMILAR

,

ALASKA.

MUST

YOU

ARE

,

PLEASE)

.

,

OR

ANY

OF

THE

.

THE

OF

THIS THIS

THE

WE

A

.

IN

PLEASE FILL

NAME

ADDRESS

CITY

BOSS

AUDIO

VEHICLE

WHO

INSTALLED

TOTAL

COST

IN

DEALER

NAME

INFORMATION

THE

SYSTEM

OF

AUDIO

THE

INFORMATION

TO

THE

?

SYSTEM

ADDRESS

REQUESTED

ON

THE

REVERSE

AND

SIDE.

STATE

MAIL

THIS

AGE

ZIP

CARD

DATE

OF

PURCHASE

SERIAL

NUMBER

MODEL

NUMBER