Boss Audio Systems HP-10, HS-IR User Manual

User’s Manual

HS-IR

WIRELESS INFRARED AUDIO

HEADPHONE SYSTEM

WITH TWO HEADPHONES

AND TRANSMITTER

HP10

WIRELESS INFRARED

HEADPHONES

HS-1R

WIRELESS INFRARED AUDIO
HEADPHONE SYSTEM

WITH TWO HEADPHONES AND TRANSMITTER

HS-1R

WIRELESS INFRARED HEADPHONES

03.2011

tech support: www.bossaudio.com/support

3451 Lunar Court • Oxnard, CA 93030

BOSS Audio Systems

www.bossaudio.com

800.999.1236

CONTENTS

HS-IR • HP10 User’s Manual - Contents

2 General precautions

2 Safety precautions

2 Installation precautions

2 What is included?

3 Headphone controls and features

4 HS-IR features

5 System wiring:

HS-IR transmitter

6 Headphone battery replacement

7 Using HP-10 with a monitor with

built-in IR audio transmitter

8 Troubleshooting

8 Specifications

Congratulations on your purchase
of a wireless infrared
headphone system.

It has been designed, engineered and
manufactured to bring you the highest
level of performance and quality, and
will afford you years of listening
pleasure.

Thank you for making your
choice in car audio and video
entertainment!

page

HS-IR

Wireless Infrared Headphone System
(Two Headphones and Transmitter)

HP-10

Wireless Headphones
(for use with BOSS HS-IR and
BOSS Monitors with Infrared
Audio Transmission)

U S E R ’ S M A N U A L

HS-IR • HP10 User’s Manual - page 2

General precautions

Safety precautions

Please read this manual completely
and carefully prior to attempting to
install your new mobile
audio/video equipment. Installed
correctly, your equipment will
provide you with years of enjoyable
and safe usage.

Installation of this equipment in any
portion of a vehicle which impairs or
distracts the driver is improper and
dangerous.

assumes no liability
whatsoever for failure to follow the
proper installation of this product.

Please keep this manual in a safe place
for future reference.

• Do not operate this equipment while
driving – safe driving should always
be your highest priority.

• Do not open or attempt to repair this
unit yourself. Dangerous high voltages
may be present which may result in
electric shock. Refer any repairs to a
qualified service technician.

• Do not attempt to repair a damaged,
broken or faulty power cord. Replace
it with a new one immediately.

• If there is smoke or any peculiar odor
present during use or if there is damage
to any of the component enclosures,
immediately unplug the power cord
and send the monitor to your local
dealer or service center as soon as
possible.

Installation precautions

Do not install components in areas
which are susceptible to rain, moisture,
direct sunlight, extreme heat or cold,
excessive dust, dirt or humidity.

Use only the installation parts and
hardware provided with the unit to
ensure proper installation. Using other
parts can cause malfunction and
possible damage to your
headphone system.

Use only a power source with 12 Volts
DC (negative ground).

Before final installation, temporarily
connect the wiring according to the
diagram near the end of this manual,
check it to ensure that it has been
connected properly, and test the unit
to make sure it is working correctly.

What is included?

The HS-IR wireless infrared audio
system includes:

• Wireless audio transmitter

• (2) wireless headphones

The HP10 is an additional set of
wireless headphones for use with

the HS-IR system or monitors
with wireless infrared audio
transmission capability.