Boss Audio Systems CAM25 User Manual
INSTALLATION PRECAUTIONS
• Choose a mounting location in your vehicle
which is protected from foot traffic and
passengers who might accidentally disconnect
the cables.
• Do not install this product in areas which are
susceptible to rain, moisture, direct sunlight,
extreme heat or cold, excessive dust, dirt or
humidity.
• If installation requires drilling holes or
modifications to the vehicle consult your
nearest dealer or professional car audio/video
installer.
• Use only the installation parts provided with
the unit.
• Use only a power source with 12 volts DC
(negative ground).
• Before final installation, temporarily connect
the wiring according to the diagram (inside), to
insure proper connectivity. Test the unit to
verify it is working correctly.
CAM25
REAR VIEW CAMERA
User’s Manual
CAM25
REAR VIEW
CAMERA
3451 Lunar Court • Oxnard, CA 93030
tech support: www.bossaudio.com/support
BOSS Audio Systems
www.bossaudio.com
800.999.1236
CAM25
REAR VIEW CAMERA
User’s Manual
Congratulations on your purchase of a BOSS
AUDIO SYSTEMS CAM25 Rear View Camera.
Thank you for making BOSS AUDIO SYSTEMS
your choice for mobile audio/video
entertainment.
SAFETY PRECAUTIONS
• Do not operate any mobile video equipment
while driving – safe driving should always be
your highest priority.
• Do not open or attempt to repair this unit
yourself. Refer any repairs to a qualified BOSS
AUDIO SYSTEMS technician.
• If there is smoke or any peculiar odor present
during use or if there is damage to any of the
component enclosures, immediately remove
it from your system and send to your local
dealer or service center as soon as possible.
SPECIFICATIONS
Model No. CAM25
Image Device 1/4" (6.3mm) Color
Effective Pixels NTSC: 628 x 582
Signal System NTSC
Sensing Area 5.78mm x 4.19mm
Sync. System Internal
Resolution 420 TV Lines
Minimum Illumination 3Lux/F1.2 (O Lux when
Infrared LED on)
Lens 2.8mm/120deg
Night Vision Range 6m
S/N Ratio > 48db
Electronic Shutter 1/60 - 1/15,000 sec.
Video Output RCA Connector,
1.0vp-p, 75 Ohm
Current Consumption 130mA
Power Supply 12V DC
Operating Temperature -30º to 50º C
Storage Temperature -30º to 60º C
Other Items Automatic White
Balance, AGC and BLC
Dimensions: 1.1" x 1.6"
28mm x 42mm
TYPICAL SYSTEM CONFIGURATION
40mm
CAM25
Power Input
DC 12V
28mm
Video Output
Video
Monitor
º
Field of View - 92
Power Input DC 12V
Loading...