Boss Audio Systems BV9985 User Manual

VCD/CD

7

00

2

Contents

1

Before You Start

Installation

Common Operations

Important Safeguards 4 About this manual 4 Precautions 5 Maintenance 6 Location & function of the controls 7 Remote control 9 Specifications 11

Wiring Connections 12 Install the Unit 13 Detach the Unit 14 Install the Front Panel 15 Detach the Front Panel 15

Reset the Unit 16 Turning the Unit On/Off 16 Volume Control 16 Setting the Sound Characteristics 16 EQ Setting 16 Turning Loudness On/Off 16 Eject a Disc 17 Open the Monitor 17 Angle Setting 17 Mute Function 17 Clear 17 Mode Selector 17 Menu Setup Button 17 Infrared Sensor 17 Eject a Disc 17

5

Main Menu

Main Menu Setup 18 Audio Adjust 18 Video Adjust 19 Source Setup 19 Others 19

1

2

3

4

DVD

Playing a DVD 23 DVD Setup 23 Selecting Tracks Fast 23 Stop the Playback 23 Pause the Playback 23

23 Number Buttons 23 Repeat Playing 23 System Switch 24 Slow Motion Playback 24 Increase Picture Size 24 On Screen Display 24 Setting the Playback Time 24 Changing the Viewing Angle 24 Changing Audio Language 25 Changing the Subtitle Language 25 Selecting Menu 25 DVD Setup Menu 25

Skip Backward/Forward/F.F/F.REW the Playback

5

6

MP3/USB/SD

Playing a MP3/USB/SD Disc 32 Selecting Tracks Fast 32 Repeat Playing 32 Number Buttons 32 Stop Playing 32 Selecting Tracks 32 Pause the Playback 32 Skip Backward/Forward/F.F/F.REW the Playback 33

On Screen Display 33

Exit an USB 33 Exit a SD Card 33

Playing a VCD/CD Disc 34 Selecting Tracks Fast 34 Repeat Playing 34 Playing Tracks at Random 34 Number Buttons 34

46

00

3

Contents

Stop Playing 34 Pause the Playback 34

Skip Backward/Forward/F.F/F.REW the Playback 34

System Switch 35 Slow Motion Playback 35 Increase Picture Size 35 On Screen Display 35 Setting the Playback Time 35 Selecting Channel 36 Selecting Title 36 Program Playing 36

Tuner

Listening to the Radio 39 Band Selector 39 Manual/Automatic Tuning 39 DX/LOC Selector 39 Selecting the Stored Station 39 MO/ST Selector 40 Scanning/Memorizing Stations Automatically 40 Number Buttons 40 On Screen Display 40

9

8

MP4(AVI,MPEG4)

Basic Operation of MP4 37 Number Buttons 37 Stop the Playback 37 Pause the Playback 37 On Screen Display 37 Repeat Playing 37 Setting the Playback Time 37

Slow Motion Playback 37

Selecting Tracks Fast 38

Skip Backward/Forward/F.F/F.REW the Playback 38 Playing Tracks at Random 38 Increase Picture Size 38 Changing Audio Language 38 Changing the Subtitle Language 38

10

12

Additional Information

Simple Troubleshooting Guide 46

12

AUX

AUX Touch Screen Menu 45

11

Bluetooth Mode

Bluetooth Operational Interface 42

Using a Bluetooth Wireless connection 42 Pairing Your Unit and Bluetooth Phone 42 Pairing in Handsfree Mode 42 Cellphone Pairing Mode 43 Bluetooth Connection and Disconnection 43 Using the Unit as a Handsfree Device 43 Last Number Dialing 43 To Dial by Cellphone 43 To Dial by the Unit 44 Using the Unit as Bluetooth Music 44 Audio Transfer between The Unit and Phone 44

RDS Setup 41 Alternative Frequencies 41 Traffic Alarm 41 Program Type 41

Additional Information

Simple Troubleshooting Guide

No power.

Check and make sure whether the fuse is blown, replace with the proper value if necessary.

Some errors occur in LCD or no function pressing the button.

the

when

Unable to receive stations.

Poor effect on receiving a station.

CDs cannot be loaded.

Sound skips.

No images.

Images skip.

Press RESET button.

Check and make sure whether the antenna is inserted or the antenna is properly connected, if not, insert the antenna or connect it properly.

Antenna may not be the proper length. Make sure the antenna is fully extended; if broken, replace the antenna with a new one.

A CD is loaded in the mechanism.

The CD is dirty or damaged.

The Video line from main unit to the TV is not connected properly.

Improper setting of the color system. Set the color system according to the connected television.

to PAL or NTSC

. .

.

Note:

If any of the problem persist after check list had been made, consult your nearest service dealer.

Never attempt to disassemble your unit by yourself.

The following checklist might helped to solve the problems which you meet when using the unit. Please double check and make sure if the connection and the procedure of the operation is properly before using the checklist .below

Problem

Cause/Solution

.

The antenna is poorly grounded, check and make sure the antenna is properly grounded at its mounting location.

.

Due to continuous product improvement, the operations are subject to run the model.

11

45

Before You Start

IMPORTANT SAFEGUARDS

About this manual

Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunct-

,

ion or damage the vehicle s electrical system.

Be sure to connect the speaker (-) leads to the speaker (-) terminal. Never connect the left and right channel speaker cables each other or to the vehicle body.

Make sure all the connections are completely correct before turning on your unit.

When replacing the fuse(s), the replacement must be of the same amperage as shown on the fuse holder.

Do not block vents or radiator panels. Blocking them will cause heat to build up inside and may result in fire.

This unit features a number of sophisticated functions ensuring superior operation. All the functions have been designed for the easiest possible use, but many are not self-explanatory. This manual will help you understand the functions and operations of the unit. This manual main explains remote control operation. However, in addition to those functions related with DVD/VCD/CD/MP3/MP4 operation that can only be operated by the remote control, there are also functions can be operated by the buttons provided for the main unit.

To

nstall the unit in an apt

place.

lest the driver distrack his attention

from, please i

Using the unit after starting the engine, otherwise

the electric energy of battery was

used up.

the unit can not be started, be-

cause

The unit must be screened from direct sunlight, or the will be wasting for the high temperature.

electric energy of battery

Do not use the unit in extreme high temperature or such low temperature conditions, and also avoid humidity and direct sunlight.

Take care of the magnetism of the unit. Do no put the credit card, cassette or watch around the unit, or they would be broken or some information in them lose.

To lest disturb the video frequency, keep far away from the unit when using your phone.

Do not put the remote under high temperature or where the sun strikes it, or else the control remote can not work normally.

control

12

1

2

3

4

5

6

7

8

9

10

11

AUX

Press SRC to switch to the AUX mode:

AUX Touch Screen Menu

AV SET

VOL+

VOL-

For more details to adjust AUDIO and PICTURE, please refer to pages 18 to 19. To adjust VIDEO ADJUST, a disc should be inserted and played normally at first.

To decrease the volume

To increase the volume

AV SET

SRC

BLUET

To enter into the bluetooth mode

01

5

Before You Start

10

44

Type of disc

VCD

MP3

CD

NOTE: The unit is compatible with VCD1.0/1.1/2.0/3.0 version and DVCD disc.

DVD

Handle the disc by its edge to keep

the disc clean, and do not touch the surface.

Do not attempt to modify the unit, modifying the unit may cause an accident.

Stop the vehicle before carrying out any operation that could interfere with your driving.

Do not work in extremely high or low temperature. Be sure the temperature inside the vehicle is between +60 C and -10 C before turning on your unit .

To enjoy optimum sound and images while playing, handle the discs as follows:

Do not use your CDs with paste residue

or ink attached.

Do not use CDs with labels or stickers attached, which may leave a sticky residue while beginning to peel off. (Shown as the picture)

Clean the discs with an optional cleaning cloth. Wipe each disc from the center out. (Shown as the picture)

PRECAUTIONS

This unit can play the following discs only:

Label on the disc Recorded material

Sound and moving pictures

Sound only

Size of disc

Besides playing the discs above, the unit also can be connected to other connector. Please refer to the details on page 19 before you playing them.

MPEG-4

Sound and moving pictures

Bluetooth Mode

To Dial by the Unit

when cellphone is connected, press to input the call number, then press to dial, DIAL OK appears, when the call is pick up, and it appears PICK UP.

23

Note:

* Press CLEAR on the remote control or in the monitor to delete wrong inputs.

22

Using the Unit as Bluetooth Music

During bluetooth mode, the musics on the cell phone switch to the unit for play. To select music fast: press to play the previous track, press to play the next one. Pause play: press to pause play. Stop play: press to stop play, and press the PLAY to play the current track again.

21

Note:

* Press and hold / on the head unit to select tracks fast.

17

18

* Press and hold on the head unit to pause play.

* Stop play is operated by using the remote control only.

30

* Press on the unit or perform the same function.

Audio Transfer between the Unit and Phone

Press to change the conversation from the unit to the cell phone.

Note:

* The function will be cause to be discon nected bluetooth link for Nokia phones, but you do not worry just press button while private conversation with Nokia phones,then switch back to the unit automatically.

6

8

3

10

43

Before You Start

01

6

Replacing the Fuse

Make sure the amperage matches the specified value when replacing the fuses. If the fuse is blown, check the power connection and replace with a new one. If the same problem occurs, it would be subjected to the malfunction. In such cases, please consult to the nearest service dealer.

When the range of the operation of the card remote control becomes short or no functions while operating. Replace the lithium battery with a new button cell (CR2025). Make sure the battery polarity before replace.

Precautions on Using Lithium Battery

Always keep the lithium battery beyond childre reach. In case swallowed, see a doctor immediately.

n's

Cleaning the battery with a dry cloth, to ensure its perfect connected.

Make sure the proper polarity when loading with the battery.

To prevent short circuit, do not use metal tweezer to clip the battery.

Gently pull out the Battery Holder while pressing the Stopper.

Put the button-type battery with mark(+) upward into the Battery Holder.

Replacing the Battery

Insert the Battery Holder into the Remote Control.

Maintenance

Bluetooth Mode

Cellphone Pairing Mode

1. Browse your cell phone menu and find the connectivity or Bluetooth connection section.

2. Select search for a new handsfree device function and allow the phone to find the mobile. (Different cell phone has different blue tooth menu, please refer to your phone manul.)

3. When CAR A/V DEVICE appear, select this item. ( if it can not be connected, please refer to mobile manual, and connect it again.)

4. To input the password, the password is:

1234.

5. Press the connect with the Handsfree option on your cellphone, and CON- NECTED appears.

Bluetooth Connection and Disconnection

When established bluetooth connection between this unit and the cell phone, bluetooth icon on the display appears in red. Press PAIR to turn off bluetooth connection, and appears in blue. Press ,PAIRING SUCCESS appear on the display, then display shows CONNECTED when bluetooth connected; display shows PAIR TIME OUT, when bluetooth disconnected.

29

Note:

* Please keep the phone battery is full of power,or else the bluetooth connection will be disturbed. * To ensure connection succeed

----Please delete menu of cell phone with bluetooth.

----Please reset the unit and cell phone.

----Please reset every step of pairing.

* Disconnect after paring

----Please pair the phone in manual. For example: pairing fixture cell phone connect.

* Pressing on the head unit or in the monitor also performs the same function.

PAIR

Using the Unit as a Handsfree Device

When the unit is ringing, then it appears call from and the phone number ID****** *****on the dialing, To accept call: Press to answer a call, it appears PICK UP on the display. To reject call: Press to reject a call, it appears REJECT on the display. To end call: Press to end call, and HANG UP appears on the display.

Note:

* Some of cellphones do not support reject call during bluetooth mode. * Press and on the unit or and performs the same function.

30

31

Last Number Dialing

Press button, it appears last call number on , press again, and then PICK UP appears on the display during conversation.

Note:

To Dial by Cell phone

1. The unit activated automatically when you make a call by cellphone, and DIAL OK appears.

2. When you receive a call, PICK UP ap pears on the display.

30

4

* Press on the unit or perform the same function.

* To dail the number of the unit in the car only.

5

* Pressing in the monitor to turn off the bluetooth function.

7

!

Warning Never use the fuse with the rated amperage more than that supplied to your unit, otherwise it will damage the unit.

!

Warning

Improper handling with the battery may lead to explosion. It cannot be charged, disassembled or thrown into a fire.

01

7

Before You Start

10

42

Location of the Controls

The Expanding

The Whole

Bluetooth Mode

Bluetooth Operational Interface

Press BT or BLUET in the following interface to open the bluetooth operational interface:

28

Dail, last phone, answer a phone.

Hang up, refuse a phone.

Number Show

PAIR

ACH (audio change)

C (clear)

8

POWER

Press it to turn on or turn off the bluetooth function.

To input the phone number.

Number Buttons

BACK

9

Using a Bluetooth Wireless Connection

The device can be dialed wirelessly in bluetooth status. Before using the bluetooth function, please turn on your cell phone bluetooth function.

Pairing Your Unit and Bluetooth Phone

The device supports handsfree profile, headset profile, A2DP ( Audio Advanced Distribution control profile) and AVRCP (Audio Video Remote Control profile). Follow the pairing instruction for the first time use, after that the unit will connect automatically.

Note:

* To provide the best sound without or little distorted sound(the cellphone or network brings). * Full duplex conversation. * Bluetooth ver2.0 compliant. * Please dial-up the device before con necting bluetooth.

Pairing in Handsfree Mode

1. Press PAIR, and PAIRING shows on the screen.

2. To get into CELL PHONE CONNECTION to search fixtures;

3. If the cellphone has connected, PAIRING SUCCESS appear and then CONNECTED in order, will from blue to red.

29

Note:

* Pressing on the head unit or in the monitor also performs the same function.

PAIR

5

11

6

5

13

1

18

4

20

7

12

14

17

10

15

16

8

3

19

2

09

41

Before You Start

01

8

Tuner

REMOTE Infrared Sensor

RESET Button

VOL+/ VOL-/SEL

SOURCE/POWER Brief press to select radio mode or playback

mode, hold and press it to turn the unit on or off.

Press it to insert or eject a disc.

BAND/[ ](band selector/play/pause/ pair) Button

(ANGEL-) Button

(ANGEL+) Button

EJECT Button

[ / ]/[ / ]([Adjust frequency backward/Previous/The last phone, Answer a telephone]/[Adjust frequency forward/Next Track/Hangup,reject a call])

USB Socket

(MENU) Button

During playback mode,brief press to set DVD menu; During radio mode,brief press it to set the radio menu,hold and press it to set the main menu.

Disc Loading Slot

(Back Space)/COLSE Button

OPEN Button

MUTE Button

LCD Screen

A/V IN

REL (release the front panel) Button

SD Card Slot

The Base

During radio mode,press it to select the bands; During playback mode,press it to play or pause. During bluetooth, press it to pair.

EQ/TA Button

9

RDS Setup

Alternative Frequencies

26

Briefly pressing AF to activate the auto searching station function. When AF is on, the RDS signal is week or there is not, it will be found in the preseted frequencies and the whole bands.

It is also performed by pressing in the monitor.

Note:

*

Traffic Alarm

25

Briefly pressing TA to activate the traffic alarm function. When AF is on, there is TA displays on LCD, or else, if there is no TP information,the mode will search TP station automatically.

Briefly press TA on the head unit or in the monitor performs the same function.

Note:

*

When TA is off, there are no TA on LCD.

*

Program Type

Briefly pressing PTY to activate PTY function. When PTY is on, PTY ON appears in the monitor, you can press UP/DOWN to select the program type, and then press PTY CODE to search the special program. And the monitor displays PTY SEARCH.

*

The TA is green when it is played by a station, if not, it is yellow. When TA is playing, the volume will be adjusted to a TA level automatically When in other modes (such as DVD,AUX), if a TA program is played.The mode will skip to the RDS status automatically. It will resume to the primary mode after the TA is over.

If PTY is off, PTY OFF appears in the monitor, the searching is stopped.

1

7

Note:

It is also performed by pressing in the monitor.

4

2

1

AF

Press it to activate AF function.

2

TA

Press it to activate TA function.

3

Press it to select PTY code.

4

PTY

Press it to activate PTY function.

5

During PTY ON, press this button to search the playing track s type.

6

7

PS: TO display the current RDS station s programs information.

8

SEARCH+/-

Press it to tune automatically.

BACK

Press it to turn to listening to the radio.

OFF

Search

123

4

5

6

7

:

NONE

FM1 CH:1 87.50MHz

8

01

9

Before You Start

40

09

Remote Control

Tips: For more information as to replacing battery, please refer to Replacing the Battery on page 6.

Tuner

Scanning/Memorizing Stations Automatically

During radio status, briefly press AMS button on the remote control to scan each stored 5 seconds respectively which Number Buttons (from 1 to . You can press responding Number Buttons or ton when your desired station is And it starts playing that station.

station

stored in

6) the cor AMS but

charged.

23

4

When press and hold AMS for more than 2 seconds, automatically memory storing The radio automatically selects and has it stored in any one of Number

Buttons (from1 to 6).

button

it will activate

function.

a station

the

Note: * The unit can be stored up to 6 stations each band. *

for It is only valid on remote control.

Number Buttons

During radio status, Number Buttons (from 1 to 6) can help you your

favorite station. You can follow the as below:

store

steps

Press and hold AMS button to receive stations automatically,and store them in 1 to 6 number respectively.

Press ST button on the remote control

MONO mode or STEREO

to

select mode.

MO/ST Selector

Stereo reception is charged when STEREO appears. It is switched to mono mode when MONO appears. ST OFF appears on the display to switch to MONO compulsively.

It is only valid on remote control.

It is only valid in FM tuning.

23

During radio status, press Number Buttons to receive the stored stations.

4

When receiving a station,press and hold any one of the Number Buttons (from 1 to 6) until the number appears on the LCD, which indicates that

station is already stored in the corresponding number button.

Press and hold another number button more than 2 seconds when listening in a station in one number station will be stored in that number button.

button's, the

6

Switch to MONO compulsively to improve the listening quality when week signal.

Note:

*

4

23

1

2

3

Press in the monitor performs the same function.

Note:

*

On Screen Display

8

During radio mode,briefly press OSD to enter RDS SETUP, press and hold it to display the edition information and the LCD display the current time.

5

Note:

* Press in the monitor to enter RDS SETUP.

7

1

2

3

4

5

7

20

6

8

9

10

12

13

14

15

16

17

18

19

21

23

24

2526

27

28 31 29

30

11

22

09

39

Before You Start

10

01

SOURCE/PWR

AMS/MENU

BAND/TITLE

LOC/SUB -T

ST/AUDIO (mono or stereo/language or channel selector)

OSD

SLOW (Slow Forward/Reward)

PTY/ANGLE

PROG(Program playing)

Mute

P/N( system adjusting)

ZOOM (to increase the picture)

GOTO (playing time/track)

RPT(Repeat Playing)

RDM (Playing Tracks at Random)

VOL+/VOL-/SEL

Tuner

DX/LOC Selector

During radio status, press LOC button to select or weak station reception.strong

LOC ON appears on the display and only local station is available. LOC OFF appears on the display both distance and local stations can be received.

5

The function is only valid on remote control.

The function is invalid in AM tuning.

Note:

*

Selecting the Stored Station

During radio status, press button to select the stored station upward, press to select downward.the stored station

27

The function is only valid on remote

control.

Note:

*

Note:

* Press BAND on the head unit or in the monitor performs the same function.

FM2

AM2

AM1

FM3

FM1

During radio status, repeatedly press BAND button to select bands in

lowing order:

the

fol

Band Selector

3

6

Briefly press it to show the current information, press and hold it to set the current information.

30

TA/LOUD (traffic alarm/loudness)

SETUP

(F.R/F.F)

CLEAR

0~9 (Number) Buttons

(Eject Button)

(Stop Playing)

(Pause/Play)

AF/EQ (alternative frequency/equalizer) Button

(Previous/Next Track)

ENTER

(Left/Right/Up/Down

ENTER)

BT (bluetooth mode) Button

PAIR During bluetooth, press it to pair.

(Dial,last phone,answer a phone)

(Hang up/refuse a phone)

Listening to the radio

Manual/Automatic Tuning

Manual Tuning: ress ( button on the remote control continuously to select a or respectively.

Por )

station downward upward

Automatic Tuning: ress and

) button seconds, the radio

a station or respectively and plays when it finds a station.

P hold ( or for more than 3 automatically searches downward

upward

Press / on the head unit or in the monitor performs the same function.

Note:

*

Band Indicator

Shows which band the radio is tuned to.

1

Preset Number Indicator

Shows what preset has been selected.

2

Shows which frequency the tuner is tuned.

Frequency Indicator

3

SEEK+/SEEK-

Briefly press to tune by the presettable range,hold and press to tune automatically.

4

8

MENU

Press this button to set the main menu.

9

SRC

Press this button to select the signal source.

5

The 6 stations of the current band.

Briefly press to select station, hold and press to save the current station to one of the 6 stations.

6

BAND

To select the bands.

10

BLUET

Press this button to switch to the bluetooth interface.

7

RDS

Press it to enter RDS SETUP.

FM1 CH:1 87.50MHz

87.50M

90.10M

98.10M

87.50M

107.90M

106.10M

2

3

4

678

9

5

1

10

01

11

Before You Start

38

08

AM Tuner Section

DVD/VCD/CD Player Section

522-1620(KHz) (Europe)

530-1710 (KHz) (U.S.A.)

450KHz

32dBuV

VCD Signal System

AUTO/PAL/NTSC

60dB

55dB(1KHz)

1%

General

FM Section

87.5-108(MHz) (Europe)

87.5-107.9(MHz) (U.S.A.)

10.7MHz

10dBuV

50dB

30dB 1KHz

20 -10KHzHz

Note:

Due to continuous product improve-

ment, specifications and design are

subject to change without prior notice.

Specifications

Power Requirement

14.4V DC (11-16V allowable)

Load Impedance

10dB Bass 100Hz Treble 10KHz

Tone Controls

Approx.160x178 x 50 mm

(d/w/h)

Dimensions

Approx.2.3kgWeight

TFT Sizes

Approx.170 x 117.5x16.5 mm

(d/w/h)

Tuning Range

IF Range

Usable Sensitivity (-30dB)

Signal-to-noise Ratio

Stereo Separation

Frequency Response

Frequency Range

IF Range

Usable Sensitivity (-20dB)

Signal-to-noise Ratio

Separation

Distortion

Max.Power Output

85W x 4

30~100Angle between

folded and unfolded

20Hz to 20KHz

Frequency Response

(Optional)

MP4(AVI,MPEG4)

Selecting Tracks Fast

Press ( or ) on remote control to perform fast reward or fast forward.Each pressing will change as follow

Skip backward/forward/F.F /F.REW the playback

20

Note:

2 X 4 X 8 X 16X

Playing Tracks at Random

During MP4(AVI,MPEG4) playback,

RDM button on the remote control to

play random under the directory which you select. P

press

any track at

ress it again to cancel

this function.

16

* The function is only valid on remote control.

Note:

The function is only valid on remote control.

Note:

*

To remove the image by pressing button.

*

27

During MP4(AVI,MPEG4) mode, Press ZOOM to increase the picture in size.There are sizes as follow, Each pressing increases the size until the maximum size is reached.

Increase the size of the picture

9

No Change

2X 3X 4X

During MP4(AVI,MPEG4) playback,first press to return to the beginning of the current track, press again within 3 seconds to play previous track ,press to play next track .

21

Changing audio language (Multi-audio)

With MP4(AVI,MPEG4) disc featuring multi-audio recordings, you can press AUDIO to switch between language and audio systems during playback.

Selection options switch as follows:

6

* This function is operated by using remote control.

the

* This function only operates with disc featuring multi-audio recordings. * The number in the mark on a disc package indicates the number of recorded languages/audio systems.

2

Note:

AUDIO 1 AUDIO 2 AUDIO 3 ......

Changing the subtitle language (Multi-subtitle)

With MP4(AVI,MPEG4) disc featuring multi-subtitle recordings. You can press SUB-T to switch between subtitle languages during playback.

Selection options switch as follows:

5

* This function is operated by using remote control.

the

* This function only operates with disc featuring multi-subtitle recordings. * The number in the mark on a disc package indicates the number of recorded subtitle languages.

2

Note:

Subtitles 1

Subtitles 2

Subtitles OFF

......

* Press and hold and button on the head unit or and in the monitor

the same function.

also

performs

Note:

* Pressing and button on the head unit or and in the monitor

the same function.

also per-

forms

08

37

Installation

02

12

Wiring Connection

Video Out 1

Rear Wire Out

Front Wire Out

Reverse Video Input

(Grey line with yellow head)

(Light Grey line with red & white head)

(Dark Grey line with red & white head)

(Brown line with yellow head)

This wire must be connected to the (-) negative side of the parking brake system of your vehicle. Once you engage the parking brake system, you will be allowed to watch the video.

Do not connect the pink wire to the battery,otherwise it will use up the power of battery.

Note:

*

Video Out 2

(Grey line with yellow head)

Subwoofer

(Brown line with brown head)

2

Reverse Gear

Orange

Red

Yellow

Black

Ignition Key

Constant 12 Volts

Ground

Rear L Speaker

Front L Speaker

Green/Black

Green

White/Black

White

Brown

Pink

Violet/Black

Blue

Violet

Grey/Black

Grey

Parking Brake

Lamp In

Antenna Power +

Rear R Speaker

Front R Speaker

4

1

Screw Hole

2

5

Output Plug(Male)

Wire Clip

3

Antenna Receptacle

Output Socket(Female)

FILTER

&FUSE

BOX

3

4

5

6

Antenna

1

6

Fan Window

Bluetooth Phone

(Black line with black head)

you any tracks directly by

( 0~9). The track

you selected will be played automatically.

can select using

Number Buttons

23

Number Buttons

* This function is operated by using the remote control only.

Note:

Basic Operation of Mp4

Insert a MP4(AVI,MPEG4) disc into the slot, the unit will automatically switch on, if a disc is loaded, press SOURCE to start the playback.

You can press EJ button on the head unit to eject the MP4 disc.

1

Note:

*

Stop the playback

18

During MP4(AVI,MPEG4) playback, first press to pause playing, then press to play from the beginning of the disc, During stop status, press pause to resume playing state.

Pause the Playback

During playback, press

MP4(AVI,MPEG4)

button to suspend the playback, Press

it again to return to normal playback.

17

Note:

* Press in the monitor performs the same function.

On Screen Display

Press OSD button the display shows:

8

Press and hold OSD LCD displays the current time.

Single elapsed time

Single remain time

OFF

17

Repeat Playing

During MP4(AVI,MPEG4) playback , press ing RPT to perform replay function, first press it to replay the current track,

press it again to cancel this function.

15

Slow motion playback

During MP4(AVI,MPEG4) mode, press SLOW to slow forward or slow backward. There are speeds as follow:

1/8

1/4 1/2

1/16

During MP4(AVI,MPEG4) playback, first press GOTO, and monitor shows select : --- , press your desired time of the playback by using number buttons. and press ENTER to set the status. Secondly press GOTO button,and the monitor shows: -:--:--, input your desired time, then press ENTER.

Setting the Playback Time

2

MP4(AVI,MPEG4)

Note:

* Press on the head unit or in the monitor performs the same function.

3

* This function is operated by using the remote control only.

Note:

* This function is operated by using the remote control only.

Note:

* This function is operated by using the remote control only.

Note:

* This function is operated by using the remote control only.

Note:

02

13

Installation

36

07

6

£pM4x3 &M5x5£p

7

Install the Unit

Main Parts List

Mounting Sleeve x1

Rear Mounting Bolt x1

Harness Rubber x1

4 Screws Each

Outer Trim Frame x 1

Connecting Wire x1

Steel Bar x 1

Installation Method DIN Front-Mount

Panel

To support the unit

Fire Wall

Bend these claws outward for a tight fit, if necessary.

Install Outer Trim Frame

Install twor M5x6 screws on both sides (left and right) of the lock hook brackets

Install the unit with four M2 2 screws

VCD/CD

Selecting Channel

During VCD status, repeatedly press AUDIO button to select the following channel:

6

Stereo

Mono Left

Mono Right

Selecting the corresponding channel to set the different sound characters.

3

27

23

PBC Selector

PBC playing confirms to version 2.0 or above disc only.

Note:

*

Program Playing

During VCD/CD mode, press PROG, the TFT displays the program menu. Pressing NUMBER BUTTONS to select the track Number and then press to move the cursor to START, press ENTER to start program playing; move the cursor to EXIT and press ENTER to exit the program playing. Move the cursor to and press ENTER to the previous page; move the cursor to and press ENTER to the next page. During this process, press to cancel the program playing.

13

18

27

During VCD status, first press TITLE button, the PBC playback starts and the menu of entire disc appears on LCD. And then you can select your desired track by using or . When a track is playing, you can press MENU to return to the menu, if you would like to end the track and select others. To cancel PBC playing, press TITLE button again.

3

* This function is operated by using the remote control only.

Note:

* This function is operated by using the remote control only.

Note:

07

35

Installation

14

02

Install the Unit

Bracket supplied to your car

Dashboard or Console

Detach the Unit

2. Screw the 4 screws, pull the head unit out.

1. Remove the outer trim frame.

Select a position where the screw holes of the mounting bracket lied with the car and the of the main unit

fitted), and at 2 places on each fasten them to the car.

supp

screw holes become aligned

(are tighten the screws (see

side). And then

4

Note: Outer Trim Frame Mounting Sleeve are not used

and

for installation method.

Installation Method

Installation using the screw holes at

sides of the unit.the

5

1

VCD/CD

During VCD mode, Press P/N on remote control to set the TV standard to PAL or NTSC or AUTO system.

System Switch

Slow motion playback

During VCD mode, press SLOW to slow forward or slow backward. There are speeds as follow:.

1/8

1/4 1/2

During VCD mode, Press ZOOM to increase the picture in size. There are sizes as follow, Each pressing increases the size until the maximum size is reached.

Increase the size of the picture

9

No Change

2X 3X 4X

On Screen Display

During VCD/CD status, briefly press OSD button the display shows:

8

Single elapsed time

Total elapsed time

Total remain time

Single remain time

OFF

To remove the image by pressing button.

*

27

8

Press and hold OSD to display the current time.

1/16

During CD playback, first press GOTO, and TFT shows : disc go to:--:--,press your desired time of the playback by using number buttons. Secondly press GOTO button, track go to :--:-- appears on TFT, also input your desired numbers to play the current time of your selection.

Setting the Playback Time

2

During VCD mode, press GOTO button to set the playing time, when the TFT display : /disc time/track time/repeat /time disp. Press [ ][ ] to select the options, press ENTER to set the status. Then press NUMBER BUTTONS to set the current status.

track

2

23

* This function is operated by using the remote control only.

Note:

* This function is operated by using the remote control only.

Note:

* This function is operated by using the remote control only.

Note:

* This function is operated by using the remote control only.

Note:

* This function is operated by using the remote control only.

Note:

02

15

34

07

Installation

Install the Front Panel

Put notch (shown as picture) onto shaft .And then slightly press into the right side.

B

A

Detach the Front Panel

Press REL button in the upper rightcorner, and then the front panel will be folded down.

VCD/CD

Playing a VCD/CD

Insert a VCD/CD disc into the slot, the unit will automatically switch on, if a disc is loaded, press SOURCE to start the playback.

Note:

Repeat Playing

During VCD/CD playback , press

ing

RPT

to perform replay function,first press it to replay the current track, press it again to cancel this function.

15

Playing Tracks at Random

During VCD/CD playback, RDM button on the remote control to play

random under the directory which you

select. P

press

any track

at

ress it again to cancel this function.

16

¼òµ¥¹ÊÕÏÅÅ³ýÖ¸ÄÏ

Stop Playing

During VCD/CD playback, first

button then press or to replay, press

again to stop the playback.

Press

18

* The default setting is Disc Repeat.

Number Buttons

Press one of Number Buttons(0~9) to select a track to play automatically.

23

18

Pause the Playback

During VCD/CD playback, press to switch between play and pause.

Press ( or ) on remote control to perform fast reward or fast forward. Each pressing will change as follow

Skip backward/forward/F.F /F.REW the playback

20

Note:

2 X 4 X 8 X 16X

* Press CLEAR to clear the mistake input.

22

You can eject a disc by pressing EJ button on the base or on the remote control or in the monitor.

*

Note:

* Press in the monitor performs the same function.

During VCD/CD playback, first press to return to the beginning of the current track, press again within 3 seconds to play previous track ,press to play next track .

21

Selecting Tracks Fast

B

A

Note:

* Press in the monitor or on the head unit performs the same function.

3

Note:

* Pressing and button on the head unit or and in the monitor

the same function.

also per-

forms

* This function is operated by using the remote control only.

Note:

* This function is operated by using the remote control only.

Note:

* This function is operated by using the remote control only.

Note:

* Press and hold and button on the head unit or and in the monitor

the same function.

also

performs

06

33

Common Operations

16

03

Reset the Unit

Operating the unit for the first time or after replacing the car battery, you must reset the unit.

VOL

TREBL

BASS

BALAN

Setting the Sound Characteristics

Press VOL+ button to increase sound level and press VOL- button to decrease sound level.

the

Repeatedly press SEL button to select the mode in the following order:desired

Volume Control

Note: * When ome errors occur on the

also press RESET

it will

s display, you can button to resume to normal, and erase the clock setting and some memorized fun ctions.

* This function can only be operated by the head unit.

Release the front panel at first, and then Press RESET button in the panel w

object, (such as a ball

the unit to initial status.

ith a pointed point pen) to set

9

Turning the Unit On/Off

Press PWR button to turn on the unit, press it again, the unit is still in waiting status. When insert a disc, unit will automatically start playing. Keep pressing it to the waiting status.

the

1

* Pressing SOURCE button on the head unit also performs the same function.

Note:

14

After selecting the desired mode, you adjust the current level by pressing

.

can

VOL

buttons

* Rotating on the head unit also performs the same function.

Note:

7

* Pressing button and rotating it on the unit also performs the same function.head

Note:

7

* During playback status, it will play auto matically after inserting a disc.

EQ Setting

Repeatedly pressing button to choose the following modes turn:

EQ

in

While listening to the popular music, classic music or rock music, you select the corresponding preset modes to adjust the sound quality ing EQ button.

can

perfectly by us

POP CLASS

OFF

* Pressing EQ button on the head unit performs the same function.

3

Note:

26

The default setting is OFF.

¼òµ¥¹ÊÕÏÅÅ³ýÖ¸ÄÏ

Turning Loudness On/Off

Pressing activate loud function. You can this button to increase the low quency, which can improve sensi ty for ears. Pressing it again to quit this function.

LOUD button

press

fre

tivi your

25

FAD

14

ROCK

26

On Screen Display

Hold and press OSD button to display the current time.

During MP3/USB/SD mode,Press ( or ) on remote control to perform fast reward or fast forward. Each pressing will change as follow

Skip backward/forward/F.F /F.REW the playback

20

2 X

Note:

4 X 8 X 16 X

Exit an USB

During USB mode, the main unit would switch to SD or DISC mode,if the previous status is SD or DISC, otherwise the main unit would switch to TUNER mode when exit the USB. During other modes,the main unit will keep the previous mode when exit the USB.

Exit a SD Card

Push SD card to exit it. During SD mode,the main unit would switch to USB or DISC mode, if the previous status is USB or DISC, otherwise the main unit would switch to TUNER mode when exit the SD card. During other modes,the main unit will keep the previous mode when exit the SD card.

MP3/USB/SD

* Press and hold and button on the head unit or and in the monitor

the same function.

also

performs

* This function is operated by using the remote control only.

Note:

* This function is operated by using the remote control only.

Note:

03

17

06

32

¼òµ¥¹ÊÕÏÅÅ³ýÖ¸ÄÏ

Eject a Disc

Press EJ button to eject or insert a disc.

Note:

* Briefly Pressing on the remote control also performs the same function.

Open the Monitor

Press OPEN button to slant the monitor or telescopes into.

Note:

* Press and hold on the remote control also performs the same function. * The unit is running after the monitor telescopes into.

Press and to adjust the best position of the monitor. Press to adjust monitor backward by definite angle, press to adjust it forward.

Angle Setting

5

* when adjusting the monitor angle, please press this button, or the monitor would be broken.

6

Note:

* This function is only operated by using the head unit.

Press button to shut off sound output. And appears on the LCD. Press it again to resume to previous volume level.

the

Mute Function

Pressing MUTE on the head unit also performs the same function.

12

Note:

*

Clear

If input some wrong selection, press CLEAR button to clear it.

22

Mode Selector

Receptor on the head unit for the card remote commander.

Infrared Sensor:

* Briefly pressing SOURCE on the head unit also performs the same function.

Note:

Repeatedly briefly pressing SOURCE button to select the different modes available.

1

8

1

9

During Main Menu/DVD Menu mode, briefly press SETUP to turn on or off DVD Menu , press and hold it to turn on or off Main Menu .

Menu Setup Button

Common Operations

During playback, if it can not be played normally or the disc can not eject, briefly press SOURCE button to switch to the radio mode, hold and press the EJ button3 seconds,

the disc will be ejected.

Eject a Disc

Press MENU on the head unit to turn on the DVD Menu and Main Menu, and press to back out the previous menu.

Note:

*

* Press CLEAR to clear the mistake input.

22

Playing a MP3/USB/SD Disc

Insert a MP3 disc into the slot, the programs in the disc will be played, if a MP3 disc is loaded, press SOURCE to start the playback.

Note:

Selecting Tracks Fast

27

During MP3/USB/SD playback, press to play the previous track, Press to play next track.

27

Repeat Playing

During MP3/USB/SD playback , press

replay the current track, press it

again to cancel this function.

RPT to

15

* The default setting is single Repeat.

18

¼òµ¥¹ÊÕÏÅÅ³ýÖ¸ÄÏ

Stop Playing

During MP3/USB/SD playback, Press to stop the playback.

Number Buttons

Press one of Number Buttons(0~9) to select a track to play automatically.

23

18

You can eject a disc by pressing EJ button on the base or on the remote control or in the monitor.

*

Pause the Playback

During MP3/USB/SD playback, press to switch between play and pause.

When playing a disc included PIC file, first press ,then press [ ][ ] to select the option.

Insert an USB into the slot, the programs in the USB will be played, if there has an USB, press SOURCE to start the playback.

Insert a SD card into the slot, the programs in the card will be played, if there has SD card, press SOURCE to start the playback.

After inserts USB or SD must wait for 20 seconds to be able to eject the disc.

*

Selecting Tracks

During MP3/USB/SD mode, first press GOTO and the TFT shows:---. Then press NUMBER BUTTONS to input the track s Number to play it ; secondly press GOTO button, and the TFT shows :

--:-- ,now input the desired Number to play the current track at this point.

2

23

MP3/USB/SD

Note:

* Pressing and button on the head unit or and in the monitor

the same function.

also per-

forms

* This function is operated by using the remote control only.

Note:

* This function is operated by using the remote control only.

Note:

* Press in the monitor performs the same function.

* This function is operated by using the remote control only.

Note:

* Press in the monitor or on the head unit performs the same function.

3

* This function is operated by using the remote control only.

Note:

05

31

18

04

Set up Main Menu

When the unit is on, the monitor will display the menu as follows:

Hold and press SETUP on the remote control or MENU on the head unit, or press MENU in the monitor to enter the menu as follows:

* Press and hold SETUP or press MENU on the head unit to set up this menu; press them in the monitor to select the option.

This menu includes AUDIO, VIDEO, SOURCE, SYSTEM, EXIT. Press them in the monitor to set the desired status.

Note:

DVDMain Menu DVDMain Menu

VIDEO

AUDIO

SOURCE

SYSTEM

EXIT

---Preferences page--

Default

Example showing how to set load factory setting:

(Press , or , then press ENTER)

(Press

--Preference Page--

Go To Preference Page

Load Factory Setting

TV Type Audio Subtitle Disc Menu Parental Password Default

Auto Eng Eng Eng

--Preference Page--

TV Type Audio Subtitle Disc Menu Parental Password

Default

Auto Eng Eng Eng

Reset

1.Video Adjust

After selecting VIDEO, the sub menu will appear as follows:

In this menu you can adjust CONTRAST, COLOR, TINT, BRIGHT, PICTURE, EXIT.

Picture Adjust

Press PICTURE in this menu, it will appear as follows:

Press and to adjust the size, then press SAVE to save the setup, press EXIT to exit this menu.

Note:

* Adjusting the other options perform the same operation.

EXIT

FM1 CH:1 87.50MHz

87.50M

90.10M

98.10M

87.50M

107.90M

106.10M

04

19

Main MenuDVD

30

05

19

3.Source Adjust

In the main menu, press SOURCE in the monitor, the sub menu will appear as follows:

You can adjust TV , CDC , GPS , AUX to ON or OFF, press the corresponding button to set.

If one of them was set OFF, that function is null. For example, to set the AUX OFF, press SOURCE can not activate AUX function. But can not set the current playback OFF.

4.System Adjust

After selecting SYSTEM, the sub menu will appear as follows:

In this menu you can adjust CLOCK SYSTEM, KEY BEEP, MONITOR FLEX and so on.

Note:

*

If the item can not be set "ON", then this model does not contain this function.

CLOCK SYS

KEY BEEP

MONI FLEX

EXIT

---Preferences page--

Disc Menu

Example showing how to set Disc Menu Language:

(Press , or , then press ENTER)

(Press

--Preference Page--

Go To Preference Page

Preferred Menu Language

TV Type Audio Subtitle Disc Menu Parental Password Default

Auto Eng Eng Eng

--Preference Page--

TV Type Audio Subtitle

Disc Menu

Parental Password Default

Auto Eng Eng

Eng

Parental

Example showing how to set parental control:

(Press , or , then press ENTER)

(Press

--Preference Page--

Go To Preference Page

Set Parental Control

TV Type Audio Subtitle Disc Menu Parental Password Default

Auto Eng Eng Eng

--Preference Page--

TV Type Audio Subtitle Disc Menu

Parental

Password Default

Auto Eng Eng Eng

Password

Example showing how to set password, and the default password is 8888.

(Press , or , then press ENTER)

(Press

--Preference Page--

Go To Preference Page

Change Password

TV Type Audio Subtitle Disc Menu Parental Password Default

Auto Eng Eng Eng

--Preference Page--

TV Type Audio Subtitle Disc Menu Parental

Password

Default

Auto Eng Eng Eng

Change

2 3 4 5 6 7 8

Off

G PG PG 13

PGR R NC 17

Adult

English

French Spanish Chinese Japanese

Russian Thai

Korean

2.Audio Adjust

After selecting AUDIO, the sub menu will appear as follows:

You can adjust VOLUME,BALANCE,FAD BASS, TREBLE, For example, press FAD, the setting menu will appear as follow:

Press and to adjust the desired FAD level, press EXIT to exit this menu.

Note:

* Adjusting the other options perform the same operation.

EXIT

FAD F4

ON

05

29

DVDMain Menu

04

20

Clock System

Press CLOCK SYSTEM in the monitor to set 12 HOUR or 24 HOUR in this menu.

Key Beep

In this menu you can adjust KEY BEEP, press it in the monitor and select ON or OFF, the default setting is ON, it means when you press the keys, they sounded.

Monitor Flex

In this menu you can adjust MONITOR FLEX, press it in the monitor and select MANUAL or AUTO, the default setting is AUTO, it means the monitor will flex automatically.

Next Setup

Press to display the menu follows, press to display the previous one.

Setting REVERSE POLA in this menu. The signal is +12V when you back a car, please press BATTERY in the monitor; if the signal is 0V, please press GROUND.

Reverse Pola

Subwoofer

In this menu you can adjust SUBWOOFER, press it in the monitor and select ON or OFF, the default setting is ON.

CLOCK SYS

KEY BEEP

MONI FLEX

EXIT

CLOCK SYS

KEY BEEP

MONI FLEX

EXIT

CLOCK SYS

KEY BEEP

MONI FLEX

EXIT

---Preference page---

TV Type

Example showing how to set TV type:

(Press , or , then press ENTER)

(Press

--Preference Page--

Go To Preference Page

Set TV Standard

TV Type Audio Subtitle Disc Menu Parental Password Default

Auto Eng Eng Eng

--Preference Page--

TV Type

Audio Subtitle Disc Menu Parental Password Default

Auto

Eng Eng Eng

PAL

Auto

Audio

Example showing how to set Audio language:

(Press , or , then press ENTER)

(Press

--Preference Page--

Go To Preference Page

Preferred Audio Language

TV Type Audio Subtitle Disc Menu Parental Password Default

Auto Eng Eng Eng

--Preference Page--

TV Type

Audio

Subtitle Disc Menu Parental Password Default

Auto

Eng

Eng Eng

Subtitle

Example showing how to set subtitle language:

(Press , or , then press ENTER)

(Press

--Preference Page--

Go To Preference Page

Preferred subtitle Language

TV Type Audio Subtitle Disc Menu Parental Password Default

Auto Eng Eng Eng

--Preference Page--

TV Type Audio

Subtitle

Disc Menu Parental Password Default

Auto Eng

Eng

NTSC

English

French Spanish Chinese Japanese

Russian Thai

Korean

English

French Spanish Chinese Japanese

Russian Thai

Korean

04

21

Main MenuDVD

05

28

Press to display the menu follows, press to display the previous one.

To set the above options as the same operation.

AMS Fullup

In this menu to set the modes of AMS. When the setup is ON, the presettable stations are full, no new s is allowed. When you select OFF, it will searching continually.

Local Area

You can select EUROPE or USA to search the stations quickly by your current area, also, you can select FM ONLY to receive the FM stations only.

Local

In this menu to search the LOCAL stations, when selected ON, the strong signal local stations can be received, when selected OFF, the week signal out-of-town stations may be received.

Goto FREQ

To select ON, you can using GOTO button on the remote control to select a station s frequency directly in radio mode.

EXIT

LOCAL AREA

LOCAL

GOTO FREQ

EXIT

LOCAL AREA

LOCAL

GOTO FREQ

EUROPE

FM ONLY

EXIT

LOCAL AREA

LOCAL

GOTO FREQ

EXIT

LOCAL AREA

LOCAL

GOTO FREQ

--Dolby Digital Setup--

Dual Mono

(Press

(Press , or , then press ENTER)

--Dolby Digital Setup--

Dual Mono Dynamic

Go To Dolby Digital Setup

Dual Mono

Dynamic

Dual Mono (1+1) Setup

Stereo

L-Mono

--Dolby Digital Setup--

R-Mono Mix-Mono

Dynamic

(Press

(Press , or , then press ENTER)

--Dolby Digital Setup--

Dual Mono Dynamic

Go To Dolby Digital Setup

Dynamic

Set DRC off

--Dolby Digital Setup--

1 4

1 2

3 4

Dual Mono

--Dolby Digital Setup--

Dual Mono

Example showing how to set stereo mode:

(Press

(Press , or , then press ENTER)

--Dolby Digital Setup--

Dual Mono Dynamic

Go To Dolby Digital Setup

Dual Mono

Dynamic

Dual Mono (1+1) Setup

Stereo

L-Mono

--Dolby Digital Setup--

R-Mono Mix-Mono

Dynamic

Example showing how to set dynamic range compression:

(Press

(Press , or , then press ENTER)

--Dolby Digital Setup--

Dual Mono Dynamic

Go To Dolby Digital Setup

Dynamic

Set DRC off

--Dolby Digital Setup--

1 4

1 2

3 4

Dual Mono

EXIT

RT SCROLL

TA VOLUME

REGION

SLOW NORMAL FAST

RT Scroll

To select your desired speed, SLOW, NORMAL, FAST. The default settingis NORMAL.

U.S.A

27

05

DVDMain Menu

04

22

--General Setup Page--

Captions

Example showing how to set captions on/off:

(Press

(Press , or , then press ENTER)

--General Setup Page--

TV Display Angle Mark OSD Lang Captions Screen Saver

Wide On Eng Off On

Go To General Setup Page

--General Setup Page--

TV Display Angle Mark OSD Lang

Captions

Screen Saver

Wide On Eng

Off

On

Closed Captions

Off

On

Screen Saver

Example showing how to set Screen Saver on/off:

(Press

(Press , or , then press ENTER)

--General Setup Page--

TV Display Angle Mark OSD Lang Captions Screen Saver

Wide On Eng Off On

Go To General Setup Page

--General Setup Page--

TV Display Angle Mark OSD Lang Captions

Screen Saver

Wide On Eng Off

On

Screen Saver

On

Off

(Picture 1)

(Picture 2)

Press in picture 1 or press in picture 2 to enter the following menu:

Adjust Screen

Press ADJUST SCREEN to display the above menu,there are a square button in the top left corner . Press the square button at place ,then the button will move to place , press it at place , it will move to place , then place , press SAVE at last.

Clock Adjust

Press CLOCK ADJUST in the monitor to adjust the clock.

TA Volume

To select your desired volume, LOW, NORMAL, HIGH. The default settingis NORMAL.

REGION

To set the AF searching region, the default setting is ON.

EXIT

LOW NORMAL HIGH

RT SCROLL

TA VOLUME

REGION

EXIT

RT SCROLL

TA VOLUME

REGION

LOW NORMAL HIGH

EXIT

RT SCROLL

TA VOLUME

REGION

REG ON

REG OFF

EXIT

RT SCROLL

TA VOLUME

REGION

REG ON

REG OFF

CLOCK SYS

KEY BEEP

MONI FLEX

EXIT

RT SCROLL

TA VOLUME

REGION

EXIT

RT SCROLL

TA VOLUME

REGION

CLOCK

EXIT

SAVE

CLOCK

EXIT

00:00:00

23

05

DVD

05

26

Stop the playback

During DVD playback, first press , then press or on the remote control to replay. Press again to quit playing comp letely.

* Press and in the monitor performs the same function.

Note:

During DVD playback, press to switch between play and stop; During stop mode, press this button to resume playback mode.

Pause the Playback

17

Press ( or ) on remote control to perform fast reward or fast forward. Each pressing will change as follow:

Skip backward/forward/F.F /F.REW the playback

20

16X 2X

4X

8 X

Playing a DVD

Insert a DVD disc into the slot , the unit will automatically switch on, if a DVD disc is loaded, press SOURCE to start the playback.

You can eject a DVD by pressing EJ button on the base or on the remote control or in the monitor.

Note:

*

14

Press one of Number Buttons(0~9) to select a track, it will be played automatically.

23

* The function is only valid on remote control.

Number Buttons

Note:

* Press CLEAR to clear the mistake input.

22

Repeat Playing

During DVD playback , press

ing

RPT

on the remote control to perform replay function as followings:

* This function is only valid on remote control. * The default setting is Disc Repeat.

15

Note:

Chapter

Title

Off

--General Setup Page--

TV Display

Example showing how to set TV Display mode:

(Press

(Press , or , then press ENTER)

--General Setup Page--

TV Display Angle Mark OSD Lang Captions Screen Saver

Wide On Eng Off On

Go To General Setup Page

--General Setup Page--

TV Display

Angle Mark OSD Lang

Captions Screen Saver

Wide

On Eng Off On

Set TV Display mode

Normal/PS Normal/LB

Wide

Angle Mark

Example showing how to set picture mode:

(Press

(Press , or , then press ENTER)

--General Setup Page--

TV Display Angle Mark OSD Lang Captions Screen Saver

Wide On Eng Off On

Go To General Setup Page

--General Setup Page--

TV Display

Angle Mark

OSD Lang Captions Screen Saver

Wide

On

Eng Off On

Set Angle Mark

On

Off

OSD Lang

Example showing how to set language mode:

(Press

(Press , or , then press ENTER)

--General Setup Page--

TV Display Angle Mark OSD Lang Captions Screen Saver

Wide On Eng Off On

Go To General Setup Page

--General Setup Page--

TV Display Angle Mark

OSD Lang

Captions Screen Saver

Wide On

Eng

Off On

Set OSD Language

English

DVD

At the beginning of playing DVD, the monitor will display the menu as follows:

This menu appears by touch the monitor.

Note:

*

AV SET

BLUET

DVD SETUP

During DVD playback, select AV SET will appear the following menu:

For more details please refer to pages 18 to 19.

Note:

*

To adjust VIDEO ADJUST, a DVD

and played normally at first.

should

be inserted

*

Note:

French German Spanish Italian Dutch Portuguese

Selecting Tracks Fast

During DVD playback, first press to return to the beginning of the current track, press again within 3 seconds to play previous track ,press to play next track .

21

Note:

* Pressing and button on the head unit or and in the monitor

the same function.

also per-

forms

Note:

* Press in the monitor or on the head unit performs the same function.

3

* Press and hold and button on the head unit or and in the monitor

the same function.

also

performs

25

05

DVD

05

24

During playback mode, Press P/N on remote control to set the TV standard to PAL or NTSC or AUTO system.

System Switch

NTSC

PAL

AUTO

The function can be operated by selecting the DVD MENU SETUP.

Note:

*

8

Press and hold OSD to display the current time.

On Screen Display

During DVD status, briefly press OSD button the display shows:

8

Title elapsed time

Chapter elapsed time

Chapter remain time

Title remain time

OFF

ANGLE 1 ANGLE 2 ANGLE 3 ......

Changing the viewing angle (Multi-angle)

With DVDs featuring multi-angle (scenes shot from multiple angles) recordings, you can press ANGLE to switch among viewing angles during playback.

Selection options switch as follows:

* This function is operated by using remote control only.

the

* This function only operates with DVDs featuring multi-angle recordings. * The mark on a DVD's package indicates it features multi-angle scenes. The number in the mark indicates the number of angles from which scenes were shot. * It is invalid to pressing ANGLE during fast forward/fast reverse or pause.

3

7

Notes:

3

DVD Playback Setting

During DVD mode, press GOTO button to set the playing time, when the TFT display : /chapter/audio/subtitle/angle /title time/chapter time/repeat /time disp. Press [ ][ ] to select the options, press ENTER to set the status. Then press NUM- BER BUTTONS or [ ][ ] to set the current status.

title

2

Changing audio language (Multi-audio)

DVDs can provide audio playback with different language. With DVDs featuring multi-audio recordings, you can press AUDIO to switch between language and audio systems during playback.

Selection options switch as follows:

6

Changing the subtitle language (Multi-subtitle)

With DVDs featuring multi-subtitle recordings. You can press SUB-T to switch between subtitle languages during playback.

Selection options switch as follows:

5

Briefly press on remote control or briefly press MENU on the head unit, main menu and sub-menu will appear on TFT, pressing [ ][ ][ ][ ] on remote control

SET UP

to select your desired items, then press ENTER on remote control to confirm. Press to back out. Press / on the head unit to choose the desired item.

* The selections are the preferred options that will be chosen if they are available on a disc. If the disc that is inserted does not have the preferred option then the discs own preference will be used. * Regarding SETUP MENU, please refer to the following pages for more details. * Some functions varies depending on the types of models or formats of the disc.

DVD SETUP MENU

Selecting MENU

Selecting Menu: During DVD status, press MENU to return to the root menu, all of the chapters will appear on monitor. You can press or button to select your desired chapter.

4

27

23

Selecting Title: During DVD status, press TITLE to return the title menu, all of the titles will appear on monitor. You also can press or button to select your desired chapter.

3

1

2

Notes:

27

23

DVD

Slow motion playback

During DVD mode, press SLOW to slow forward or slow backward. There are speeds as follow:

1/2

1/ 8

1/4

1/ 4

1/2

1

/

8

1/ 16

1

/

16

* This function is operated by using the remote control only.

Note:

* This function is operated by using the remote control only.

Note:

* This function is operated by using the remote control only.

Note:

* This function is operated by using the remote control only.

Note:

During DVD mode, Press ZOOM to increase the picture in size. There are sizes as follow, Each pressing increases the size until the maximum is reached.size

Increase the size of the picture

9

No Change

2X 3X 4X

To remove the image by pressing button.

*

27

* This function is operated by using the remote control only.

Note:

* This function is operated by using remote control.

the

* This function only operates with disc featuring multi-audio recordings. * The number in the mark on a disc package indicates the number of recorded languages/audio systems.

2

Note:

AUDIO 1 AUDIO 2 AUDIO 3 ......

* This function is operated by using remote control.

the

* This function only operates with disc featuring multi-subtitle recordings. * The number in the mark on a disc package indicates the number of recorded subtitle languages.

2

Note:

Subtitles 1

Subtitles 2

Subtitles OFF

......